Focal mechanism inversion in the Giudicarie–Lessini seismotectonic region (Southern Alps, Italy): Insights on tectonic stress and strain

A set of 41 focal mechanisms (1989–2006) from P-wave first polarities is computed from relocated seismic events in the Giudicarie–Lessini region (Southern Alps). Estimated hypocentral depths vary from 3.1 to 20.8 km, for duration magnitudes (M_D) in the range 2.7–5.1. Stress and strain inversions are performed for two seismotectonic zones, namely G (Giudicarie) and L (Lessini). This subdivision is supported by geological evidence, seismicity distribution, and focal mechanism types. The available number of data (16 in G, 22 in L) does not make possible any further subdivisions. Seismotectonic zones G and L are undergoing different kinematic regimes: thrust with strike-slip component in G, and strike-slip in L. Principal stress and strain axes in each sub-region show similar orientations. The direction of maximum horizontal compressive stress is roughly perpendicular to the thrust fronts along the Giudicarie Belt in zone G, and compatible with right-lateral strike-slip reactivation of the faults belonging to the Schio-Vicenza system in zone L. On the whole, kinematic regimes and horizontal stress orientations show a good fit with other stress data from focal mechanisms and breakouts and with geodetic strain rate axes.     

Sensitivity analysis of support safety factor for predicting the effects of contributing parameters on roof falls in underground coal mines

Roof falls accounted for 18.18% of all fatal accidents in Indian coal mines, contributing about 35.29% of all fatal accidents in below-ground operations in 2005. The support safety factor, always preferred in support planning and design of underground coal mines, may be an important predictor for roof falls. In this paper, geotechnical data were collected from 14 roof fall incident places in an underground coal mine, located in the Eastern India, which has bord and pillar method of workings. The mean value of probabilistic support safety factor for the case study mine was found to be 1.24. However, the probability, of the estimated support safety factor of less than or equal to one, was found to be 0.246. Sensitivity analysis was conducted to analyze the effects of the contributing parameters on support safety factor and the likelihood of the roof fall. The multi-variate regression analysis was carried out for the data generated by Monte Carlo method to correlate the contributing factors to support safety factor. It ranked gallery width as the first parameter to control the support safety factor.     

Mapping Proterozoic unconformity-related uranium deposits in the Rockhole area, Northern Territory, Australia using landsat ETM+

The Rockhole area, Northern Territory, Australia, hosts a number of Proterozoic unconformity-related uranium deposits. The geology of the area features within Paleoproterozoic rocks of the Pine Creek Orogen, near the unconformity with overlying platform cover sandstone of the Paleo- to Mesoproterozoic McArthur Basin. Landsat Enhanced Thematic Mapper plus (ETM+) data was used in the Rockhole area to assist in mapping geological structures and lithology, and to identify anomalous concentrations of ferrous minerals, the product of alteration, which can be indicators of buried uranium mineralization. Several image-processing procedures were applied to the ETM+ data to identify, isolate and enhance mineralogical information as simple and complex false color composites. ETM+ 754 shown as red green and blue respectively was the best simple image. Overall, complex images based on Principal Component Analysis proved to be the most useful products. Sandstone, shale and siltstone, the target lithologies, Koolpin Formation, the target stratigraphic unit, and bleaching pattern due to the removal of iron(II) compounds, the target alteration pattern, were confidently mapped to provide information required by the mineral emplacement model, which ultimately identified areas of likely uranium mineralization. Thus the contrasting behavior of the two principle oxidation states of uranium and iron can be utilized to map/delineate bleached alteration zones associated with economic concentrations of uranium using multispectral sensors like Landsat or better hyperspectral sensors.     

Diagenesis, palaeoclimate and tectono-sedimentary influences on clay mineralogy and stable isotopes from Upper Cretaceous marine successions of the Basque-Cantabrian Basin (N Spain)

Clay mineralogy and whole-rock stable isotopes (δ¹⁸O and δ¹³C) of Upper Cretaceous marly sediments on the Basque-Cantabrian Basin have been integrated to determine the main effects of diagenesis, palaeoclimate and tectono-sedimentary factors in sections belonging to deep- (Barrika) and platform-marine (Isla de Castro, Villamartín and Olazagutía) settings.The mean values for the clay assemblages and δ¹⁸O exhibit notable differences among the sections, partially explainable by the influence of diagenesis. The Barrika sediments, with more diagenetically advanced illite-smectite (I-S) mixed-layer (R1, 70% illite), authigenic chlorite, and low δ¹⁸O (−4.05‰ PDB), experienced higher diagenetic grade than Isla de Castro and Olazagutía, which have R0 I-S (20% illite) and heavier δ¹⁸O. Villamartín was also affected by higher diagenesis than Isla de Castro and Olazagutía, given the occurrence of R1 I-S (60% illite) and low δ¹⁸O (−4.11‰ PDB). However, the absence of other clays in Villamartín (e.g. authigenic chlorite) is indicative of less diagenetic grade than Barrika. These results show the useful integration of clay mineralogy and stable isotopes to detect different diagenetic grades in distinct marine successions of the same basin.Despite being influenced by diagenesis, the clay mineralogy partially preserves its inherited signature. This allows detection of major contents of I-S and mica, and minor kaolinite, interpreted as indicative of warm palaeoclimatic conditions. High kaolinite content in Villamartín and absence of kaolinite in Isla de Castro, though, are considered to be a product of neither diagenesis nor palaeoclimatic influences. Instead, tectono-sedimentary causes, related to unsuitable conditions for clay formation and transport from the local source areas, contributed to original clay differences. The inferred effects of diagenesis, palaeoclimate and tectono-sedimentary factors make this work important to show the potentially great variety of controls on the clay mineralogy of marine sections, which are often uncritically treated in studies concerning the Late Cretaceous.     

Belemnites from the lower middle Cenomanian of Hoppenstedt, northern Germany: significance and integrated correlation

The belemnite species Praeactinocamax primus (Arkhangelsky, 1912) and Belemnocamax boweri Crick, 1910 are described from the Cenomanian of the abandoned limestone quarry section of Hoppenstedt (Sachsen-Anhalt, northern Germany). They co-occur in the upper part of a prominent tripartite bioclastic limestone bed associated with the ammonite Acanthoceras rhotomagense, indicating the primus Event of the lower middle Cenomanian A. rhotomagense ammonite Zone. An integrated stratigraphical calibration including carbon stable isotope correlation to southern England suggests that the belemnite event horizon at Hoppenstedt occupies exactly the same chronostratigraphical position as elsewhere, highlighting the strictly isochronous character of the primus Event across northwestern Europe. Furthermore, stratigraphical gaps in the Hoppenstedt succession are evaluated.     

The WRF model performance for the simulation of heavy precipitating events over Ahmedabad during August 2006

The summer monsoon season of the year 2006 was highlighted by an unprecedented number of monsoon lows over the central and the western parts of India, particularly giving widespread rainfall over Gujarat and Rajasthan. Ahmedabad had received 540.2mm of rainfall in the month of August 2006 against the climatological mean of 219.8mm. The two spells of very heavy rainfall of 108.4mm and 97.7mm were recorded on 8 and 12 August 2006 respectively. Due to meteorological complexities involved in replicating the rainfall occurrences over a region, the Weather Research and Forecast (WRF-ARW version) modeling system with two different cumulus schemes in a nested configuration is chosen for simulating these events. The spatial distributions of large-scale circulation and moisture fields have been simulated reasonably well in this model, though there are some spatial biases in the simulated rainfall pattern. The rainfall amount over Ahmedabad has been underestimated by both the cumulus parameterization schemes. The quantitative validation of the simulated rainfall is done by calculating the categorical skill scores like frequency bias, threat scores (TS) and equitable threat scores (ETS). In this case the KF scheme has outperformed the GD scheme for the low precipitation threshold.     

氢化物发生及其在分析检测领域的应用

论述了氢化物发生的条件和普遍性及其在分析检测领域的应用,这些领域包括试样分解,分离富集,容量分析、比色分析、原子荧光光谱、原子吸收光谱、电感耦合等离子体原子发射光谱、电感耦合等离子体质谱等分析测试技术。     

欧盟RoHS指令与中国的对策

对欧盟RoHS指令的主要内容进行了简述,初步介绍了与RoHS指令相似或者相关的各国的环保指令,讨论了RoHS指令等对我国电子电气行业带来的巨大冲击。简要总结我国电子信息产业部、国家质量监督检验检疫总局、商务部等各管理及技术部门为了应对RoHS指令和提高我国电子电气行业竞争力而作出的相应对策。     

能量色散X射线荧光光谱法测定钼矿石中钼铅铁铜

建立了能量色散X射线荧光光谱法测定钼矿石中钼、铅、铁、铜的方法,讨论了粒度效应、矿物效应的影响因素,确定了采取粉末样品,用系列标准样品建立工作曲线,通过元素间相互校正消除基体效应,用内控标准样品考察了方法的精密度(RSD,n=11)为0.44%～15.4%。实际样品的测定结果和化学法相符,可满足日常分析工作需要。     

流体包裹体成分测定的低温相变和显微拉曼光谱分析技术研究进展

论述了包裹体低温分析技术的原理以及进展。传统的流体包裹体低温分析技术是以显微冷冻测温测定无机盐体系为主,目前已发展到应用低温原位拉曼光谱技术对包裹体中的阳离子和阴离子进行定量-半定量分析。油气包裹体原位低温分析技术也取得了较大的突破,对不同成分油气包裹体低温下的相变过程取得了一定的认识,据此对油气包裹体进行分类,推测其主要成分,为油气包裹体计算提供基础参数。