贵州修文小山坝铝土矿中镓等伴生元素分布规律研究

通过ICP-MS等分析方法对贵州小山坝铝土矿中伴生元素的研究,发现该矿床TiO2、Ga、Ge、Sc、Nb、Li和REE等有用伴生元素在铝土矿矿体中均有较高富集,其含量大多接近或超过了工业综合利用标准,具有较大的经济价值,特别是矿区富铁铝土矿石中Ga和Sc等含量异常高.贵州铝土矿资源丰富,其伴生元素在铝土矿冶炼过程中所产生的赤泥中更为富集,因此,贵州铝土矿综合利用前景十分巨大,这些元素潜在的经济价值,在某种程度上,甚至会超过主导产品氧化铝的价值.开展铝土矿中镓等伴生有用元素的分布及赋存状态的研究,对于镓等稀散元素在特殊地质地球化学环境中超常富集机制、矿产资源综合价值的重新认识评估和矿产资源的综合利用将十分重要,不仅可为铝工业注入新的活力,增加新的经济增长点,而且还可以解决大量赤泥堆放和利用问题,同时获得较大的社会效益与环境效益.     

冲绳海槽有孔虫壳体的微量元素Sr,Nd同位素地球化学

钙质生物壳的微量元素组合和Sr,Nd同位素组成是识别海底混合源沉积物中生物源物质相对贡献的重要参数.冲绳海槽有孔虫壳体强烈富集Sr,P,Mn和Ba,富集Li,U,Th,Sc,Co,Pb,Zn,Cr,Rb,Y,Sb和轻稀土元素,弱富集V,Ga,Zr,Nb,Cd和中稀土元素,相对贫Ge,Mo,In,Sn,Cs,Hf,Ta,W,Tl,Bi和重稀土元素,海水中微量元素的背景含量和生物活动对微量元素的选择性吸收是有孔虫壳体中微量元素发生富集和贫化的主要机制,冲绳海槽有孔虫壳体的稀土元素配分模式与海水和太平洋有孔虫的有明显差异,表现出中稀土元素相对富集,并具有微弱的负Ce异常.有孔虫壳体的Sr,Nd同位素比值也与大洋海水不同,分别为0.709769和0.512162,前者略高于大洋海水,后者略低于大洋海水,表明冲绳海槽海水明显受大陆河水影响.     

Numerical and experimental study on hydrodynamic interaction of side-by-side moored multiple vessels

This paper aims to investigate the basic interaction characteristics of side-by-side moored vessels both numerically and experimentally. A higher-order boundary element method (HOBEM) combined with generalized mode approach is applied to analysis of motion and drift force of side-by-side moored multiple vessels (LNG FPSO, LNGC and shuttle tankers). Model tests were carried out for the same floating bodies investigated in the numerical study in regular and irregular waves. Global and local motion responses and drift forces of three vessels are compared with those of calculations. Discussions is highlighted on applicability of numerical method to prediction of sophisticated multi-body interaction problem of which motion behavior is very important to analysis of mooring dynamics of deep sea floating bodies.     

A new form of generalized Boussinesq equations for varying water depth

A new set of equations of motion for wave propagation in water with varying depth is derived in this study. The equations expressed by the velocity potentials and the wave surface elevations include first-order non-linearity of waves and have the same dispersion characteristic to the extended Boussinesq equations. Compared to the extended Boussinesq equations, the equations have only two unknown scalars and do not contain spatial derivatives with an order higher than 2. The wave equations are solved by a finite element method. Fourth-order predictor–corrector method is applied in the time integration and a damping layer is applied at the open boundary for absorbing the outgoing waves. The model is applied to several examples of wave propagation in variable water depth. The computational results are compared with experimental data and other numerical results available in literature. The comparison demonstrates that the new form of the equations is capable of calculating wave transformation from relative deep water to shallow water.     

Full-range nonlinear analysis of fatigue behaviors of reinforced concrete structures by finite element method

Ｆｕｌｌ－ｒａｎｇｅｎｏｎｌｉｎｅａｒａｎａｌｙｓｉｓｏｆｆａｔｉｇｕｅｂｅｈａｖｉｏｒｓｏｆｒｅｉｎｆｏｒｃｅｄｃｏｎｃｒｅｔｅｓｔｒｕｃｔｕｒｅｓｂｙｆｉｎｉｔｅｅｌｅｍｅｎｔｍｅｔｈｏｄ￥ＳｏｎｇＹｕｐｕ；ＺｈａｏＳｈｕｎｂｏ；ＷａｎｇＲｕｉｍ...     

标志沉积层磁组构特征及其古环境意义研究

通过对长江三角洲及其邻近区域埋藏古土壤、潮坪、长江下游河道浸滩、舟山滨岸风成沙丘、南京黄土古土壤序列沉积体的磁组构测量统计分析，取得了各自的标志特征。该２特征揭示出，舟山滨岸风成沙丘与南京黄土吉土壤序列沉积的搬运介质能量位相基本一致，其物源来向却显示出巨大差异；上述两类沉积体与上述现今潮坪、河道漫滩沉积体地搬运介质能量位相及物源来向均显示出绝然不同的标志特征。然而浸滩物源来民南京黄土的物尖兵为向却     

Numerical Analysis of Wave Forces on Arbitrarily Shaped Multi-Pillars Over Varying Topography

The modified hybrid element method (MHEM) is utilized to predict and analyze wave forces on arbitrarily shaped multiple bodies. This method can be applied to waves of all water depths, i. e. shallow, intermediate, and deep waters, on slowly varying seabed. The MHEM employs the ICCG method to save CPU and storage, thus the computation of wave forces for large multi-body systems can be carried out on microcomputers. Numerical results of the present method are compared with experimental data and other solutions. It is shown that the MHEM provides more accurate solutions of the wave forces than other numerical methods do. Therefore, the methodology presented herein can be used in the design of coastal and ocean structures.     

Elasto-Plastic Analysis of Tubular Joints of Offshore Platforms by Finite Element Method

The plastic node method is reformulated by the variational principle and is applied to elasto-plastic finite element analysis of tubular joints, eventually including the effect of internal and external gussets, stiffener rings, etc., if necessary. Four different joints are studied here in detail for the elasto-plastic behavior, the strain at the hot spot, the strain concentration factor around the intersection line, and the propagation of the plastic region with loading up to collapse in order to determine the ultimate strength, safety factor, and development of the plastic field. The present results are in good agreement with the experimental results.     

Computation of Viscous Uniform and Shear Flow over A Circular Cylinder by A Finite Element Method

The incompressible viscous uniform and shear flow past a circular cylinder is studied. The two-dimensional Navier-Stokes equations are solved by a finite element method. The governing equations are discretized by a weighted residual method in space. The stable three-step scheme is applied to the momentum equations in the time integration. The numerical model is firstly applied to the computation of the lid-driven cavity flow for its validation. The computed results agree well with the measured data and other numerical results. Then, it is used to simulate the viscous uniform and shear flow over a circular cylinder for Reynolds numbers from lO0 to lO00. The transient time interval before the vortex shedding occurs is shortened considerably by introduction of artificial perturbation. The computed Strouhal number, drag and lift coefficients agree well with the experimental data. The computation shows that the finite element model can be successfully applied to the viscous flow problem.     

桶形基础平台三维有限元稳定性分析

以我国第一座桶形基础采油平台工程实例为原型，采用三维有限元计算方法对桶形基础稳定性分析。平台在波浪、风等荷载作用下，其稳定性不仅与平台的整体结构有关，而且与桶形基础及其周围土体相互作用相关。在计算中，利用薄层摩擦单元模拟土与结构间的相互作用，取得了很好的效果。分析结果表明桶形基础采油平台在设计条件下运行是较为稳定的。