海南岛西部青白口系石碌群褶皱变形特征及其控矿分析

青白口系石碌群属于一套海相沉积经变质的以细粒碎屑岩、泥岩及镁质碳酸岩夹火山岩为原岩的变质岩系组合,赋存有沉积变质型铁矿和热液型铜钴矿。岩石经历了多期次变形作用的改造,总体表现为由褶皱变形往韧脆性断裂变形演化的特征,褶皱变形包含了三个变形序列的构造形迹组合。与铁矿主成矿期密切有关的NW向石碌复向斜属于海西．印支期造山运动...     

复合褶皱数学模型的应用

为便于对褶皱构造的几何形态进行描述、概括和实际应用，在划分出两个基本类型褶皱的基础上，用数学方程式对五种叠加褶皱进行了表述，这样，利用计算机可以快速准确地获得叠加褶皱的具体形态。     

The Songpan-Garzê Massif: Its Relation to the QinlingFold Belt and Yangtze Platform and Developmental History1

Abstract Whether there existed the Songpan-Garzê massif is a controversial problem. This paper expounds and proves that the old basement of the massif is represented by the pre-Sinian granitic rock series. This massif and the South Qinling fold belt might both be a part of the old Yangtze platform. Rifting generated by the Caledonian orogeny in the terminal Early Palaeozoic caused the massif to be disintegrated from the northwestern part of the Yangtze platform. This disintegration, however, was not thorough, and the rift troughs were later gradually closed and filled up. The Emei taphrogeny that was initiated in the Early Permian Maokou'an Stage involved a second disintegration of this massif from the Yangtze platform. The rift line largely goes along the Muli-Pingwu line. This rifting belongs to synchronous extensional rifting at peripheries of the Yangtze platform and in its interior, showing that the posterior, lateral and interior extension resulting from rapid northward shift of the Yangtze platform led to isolation of this massif together with South Qinling from their adjacent areas. During the Ladinian Stage, the Songpan-Garzê massif and southern Qinling sank strongly en masse. This subsidence continued till the end of the Late Triassic when the late Indosinian movement caused the sea trough to be closed and Songpan-Garzê and southern Qinling to be folded and uplifted and become mountains.     

基桩倾斜弹性波检测机理

阐述了基桩倾斜无损检测基本原理--惠更斯-菲涅尔原理.通过在桩侧面实施地震排列装置检测试验,证实了桩倾斜度越大,桩侧效应越强.在倾斜基桩中埋设三分量检波器检测结果说明,基桩倾斜时,桩侧界面响应主要以转换后沿界面方向的纵波与垂直于桩侧面的横波为主.     

TRANSVERSE STRUCTURES FEATURES OF DIFFERENT DEPTHS DERIVED FROM BOUGUER GRAVITY ANOMALIES IN THE SOUTHERN SEGMENT OF TAN-LU FAULT ZONE

To research the faults distribution and deep structures in the southern segment of Tan-Lu fault zone(TLFZ) and its adjacent area, this paper collects the Bouguer gravity data and makes separation by the multi-scale wavelet analysis method to analyze the crustal transverse structure of different depths. Meanwhile Moho interface is inversed by Parker variable density model. Research indicates that the southern segment of TLFZ behaves as a NNE-directed large-scale regional field gravity gradient zone, which separates the west North China-Dabie orogen block and the east Yangtze block, cutting the whole crust and lithosphere mantle. There are quite differences of density structures and tectonic features between both sides of this gradient belt. The sedimentary and upper crustal density structure is complex. The two east branches of TLFZ behave as linear gravity anomalous belt throughout the region, whereas the two west branches of TLFZ continue to extend after truncating the EW-trending gravity anomaly body. The lower crustal density structure is relatively simple. TLFZ behaves as a broad and gentle low abnormal belt, which reflects the Cretaceous-Paleogene extension environment caused graben structure. The two west branches of TLFZ, running through Hefei city, extend southward along the west margin of Feidong depression and pinch out in Shucheng area due to the high density trap occlusions in the south of Shucheng. The Feizhong Fault, Liu'an-Hefei Fault, and Feixi-Hanbaidu Fault intersect the two west branch faults of TLFZ without extending to the east. Recent epicenters are mainly located in conversion zones between the high-density and the low-density anomaly, especially in TLFZ and the junction of the faults, where earthquakes frequently occurred in the upper and middle crust. As strong earthquakes rarely occur in the southern segment of TLFZ, considering its deep feature of abrupt change of the Moho and intersections with many EW-trending faults, the hazard of strong earthquake cannot be ignored.     

Approximate traveltime inversion in downhole microseismic monitoring

In downhole microseismic monitoring, accurate event location relies on the accuracy of the velocity model. The model can be estimated along with event locations. Anisotropic models are important to get accurate event locations. Taking anisotropy into account makes it possible to use additional data – two S-wave arrivals generated due to shear-wave splitting. However, anisotropic ray tracing requires iterative procedures for computing group velocities, which may become unstable around caustics. As a result, anisotropic kinematic inversion may become time consuming. In this paper, we explore the idea of using simplified ray tracing to locate events and estimate medium parameters. In the simplified ray-tracing algorithm, the group velocity is assumed to be equal to phase velocity in both magnitude and direction. This assumption makes the ray-tracing algorithm five times faster compared to ray tracing based on exact equations. We present a set of tests showing that given perforation-shot data, one can use inversion based on simplified ray-tracing even for moderate-to-strong anisotropic models. When there are no perforation shots, event-location errors may become too large for moderately anisotropic media.     

可替换式桥梁横向防落梁限位装置抗震性能研究

针对目前桥梁结构横向防落梁限位装置损毁后修复困难的问题,提出一种新型的带可更换耗能段的桥梁横向防落梁限位装置。分别以可更换耗能段的腹板厚度、腹板高度及安装位置等为参数,采用有限元软件ABAQUS建立了10个不同参数的装置模型并对其开展拟静力仿真试验,探讨其工作机理,验证其可更换的设计思想并剖析其破坏机理,研究各参数对装置滞回曲线、承载力、延性和耗能能力的影响规律。结果表明:该装置可通过先可更换耗能段破坏再竖板破坏达到多道设防和分级耗能的目的,且整个加载过程中装置的滞回曲线饱满、稳定、无明显捏拢,表现出良好的耗能能力;随着可更换耗能段腹板厚度的增加,装置屈服承载力、极限承载力、屈服位移、极限位移以及延性系数逐渐增大,耗能能力逐渐增强;可更换耗能段高度对装置屈服承载力影响不显著;随着可更换耗能段高度的增加,装置极限承载力逐渐增大,装置屈服位移先增大后减小,装置极限位移整体呈下降趋势,装置的延性系数和耗能能力逐渐减小;可更换耗能段的安装高度对装置屈服承载力和耗能能力的影响无统一规律,但与装置的屈服位移、极限位移及延性系数成负相关。基于本析结果,建议装置在满足承载力要求的前提下,应尽量选取可更换耗能段腹板厚度较厚、高度较小和安装位置较低的参数进行设计。     

基于反应位移法的复杂软土盾构隧道横断面抗震分析

采用反应位移法,利用ABAQUS软件建立梁-弹簧有限元模型,进行复杂软土场地中盾构隧道横断面抗震分析,并结合天津滨海Z2线软土盾构隧道进行计算。研究表明,在地震作用下,最大弯矩值和剪力值一般出现在拱肩位置,最大轴力值一般出现在拱腰附近;处于复杂地层附近的隧道结构内力值较大,应加强该位置处的抗震构造措施或在选线时尽量避免复杂场地。本文对复杂软土场地中盾构隧道横断面抗震设计具有一定参考价值。     

四川盆地熊坡背斜构造特征及其成因机制

基于地震剖面解释、数字高程模型、历史地震、测年数据及钻孔等资料,分析了四川盆地熊坡背斜的构造特征、运动学特征及其成因机制。结果显示：(1)熊坡背斜与蒲江-新津断裂空间展布上具有较强的一致性,表现出断层传播褶皱模型,变形显著,缩短量为7.2 km,缩短率约为30％;(2)熊坡背斜隆起于(1.0±0.2) MaB.P.之后,且中更新世早期及晚更新世曾发生过强烈活动,使背斜两侧第四系厚度产生明显差异;(3)蒲江-新津断裂现今地震活动明显且小震频繁,曾有Ms=5.0～5.9的地震历史记录;(4)来自龙门山与扬子克拉通的挤压应力以及断层-滑脱作用是形成熊坡背斜的主要应力机制。熊坡背斜并非均匀应力下连续变形的产物,而是由于断裂活动时发生快速抬升而形成的。     

中国东部苏鲁榴辉岩超基性岩褶皱带的演化及其与大别(中国)和柯切塔夫(哈萨克斯坦)杂岩的对比(英文)

苏鲁褶皱带形成于元古宙 (2 2 33～ 185 5Ma)典型优地槽构造环境 ,主要由石榴橄榄岩、石榴辉石岩、榴辉岩等侵入岩 (柯石英深度相地幔岩浆房中形成 )和它们的火山沉积建造围岩一起经褶皱、变质而形成。变质作用经历了先蓝片岩相 (前花岗岩 )后片麻岩混合岩相过程。由于变质作用的不规律性 ,苏鲁褶皱带可分为 2个构造带 :(1)东部构造带 (蓝片岩 )和 (2 )西部构造带 (片麻岩混合岩 )。根据A·都城秋穗所识别的变质带系统 ,可将其作为一个双变质带。东部构造带以出现许多块状、条带状榴辉岩辉石岩橄榄岩组合的残余岩块为特征 ,其中还残留着高压的矿物 (石榴石、绿辉石、柯石英 ) ,而且有被混合岩和各种交代岩替代的显著标志。在中生代 ,苏鲁元古褶皱带受造山作用的影响活化 ,导致许多花岗岩体的侵入 ,使交代岩广泛发育。