岬间海湾岸线平衡形态神经网络模型

讨论了目前海湾岸线平衡形态经验模型存在的不足之处。从沿岸输沙公式入手,阐述了平衡岸线的机理模式,重新定义了平衡海湾的“下岬角”,给出了模型参数与主波向的具体计算方法,并以华南典型海湾为学习样本,建立了岸线平衡形态的神经网络模型。通过模拟海湾与实际稳定海湾——乌场湾间的对比分析,表明所建神经网络模型是较抛物模型更为理想的平衡岸线模型。     

Design of ship's bow form by potential-based panel method

A surface panel method treating a boundary-value problem of the Dirichlet type with the free surface is presented to design a three-dimensional body corresponding to a prescribed pressure distribution. The free surface boundary condition is linearized with respect to the oncoming flow, and computed by four-point finite difference scheme. Sample designs for submerged spheroids and Wigley hull are carried out to demonstrate the stable convergence, the effectiveness and the robustness of the method. The design of a 5500TEU container carrier is performed with respect to reduction of the wave resistance. To reduce the wave resistance, calculated pressure on the hull surface is modified to have the lower fluctuation, and is applied as a Dirichlet type dynamic boundary condition on the hull surface. The designed hull form is verified to have the lower wave resistance than the initial one not only by computation but also by experiment.     

Comparing grain size distribution of sediment and original soil under raindrop detachment and raindrop-induced and flow transport mechanism

The grain size distribution (GSD) of sediment in comparison with the original soil GSD is discussed under different slopes (5, 15 and 25%) and rainfall intensities (30, 60 and 90 mm h^–1 with respective duration of 30, 15 and 10 min) but identical runoff (15 mm). The sediment quantification was carried out by raindrop-induced flow transport (RIFT) or/and transport by flow (FT) using a rainfall simulator and a 6 × 1 m² erosion plot and a silt loam. The results show a high degree of enrichment for size classes of 2–4 and 4–8 μm and a high degree of depletion for size classes of >63 μm under different slopes and rainfall intensities. In addition, the results show that the experimental enrichment ratio (ER) for particle size <16 μm under different slopes and rainfall intensities was greater than 1, while the ER for particle size >32 μm was less than 1.     

24位地震数据采集器时间格式转换的实现

应用C语言编写四字节24位采集器时间编码与七字节时间编码间的相互转换程序，并可在单片机上运行。为24位采集器与计算机和外界设备间建立透明时间编码通道。     

浙江南部近海沉积物柱状样中脂类生物标志物的组成及形态分布

分析了浙江南部近海(东海陆架泥质区)沉积物柱状样中游离态和碱不稳定结合态脂类生物标志物的组成.沉积物中的脂肪酸呈现以C16脂肪酸为主峰的单峰形分布趋势,具明显偶碳优势,除表层沉积物中脂肪酸以游离态为主外,结合态为柱状样中脂肪酸的主要存在形态,脂肪酸的垂直分布主要由降解作用控制;以甾醇和脂肪醇为主体的醇酮组分主要以游离态...     

防波堤损坏特点与其成因的关系

利用日本《被灾防波堤集览》、葡萄牙锡尼斯防波堤、日本六小河原港防波堤、中国大连渔港、台湾基隆港等61件典型损坏案例及其它参考文献所涉及的140余件案例,讨论了防波堤损坏平面形态与断面部位的特征。根据防波堤损坏特点,从波浪水动力学特性、结构、地基和施工多方面分析了损坏原因与损坏特性之间的关系,从而深化对防波堤工作机理的认识。     

油田高含水期基于微观渗流机理的宏观岩心水驱油数值模拟研究

建立地层孔隙网络模型描述微观孔喉特征,利用逾渗方法计算基于微观渗流机理的相对渗透率曲线,并将之应用到数值模拟计算中,给出考虑微观渗流特征的方程,并进行数值求解,得到地层中流体分布特征。实例分析表明该方法可以得到基于微观特征的剩余油分布数量和形式,为调剖堵水、化学驱提供技术参数,实现微观渗流机理与宏观计算的结合。     

泉州湾泥沙运移特征的初步研究

泉州湾属于潮流、径流和波浪综合作用下的山地海湾,根据两次(1994年6月和2001年12月)水文泥沙实测资料,分析泉州湾悬浮泥沙和沉积物分布特征,研究其沉积物来源,并探讨北水道的沉积速率。悬浮泥沙含量自河口(湾顶)-湾口-外海逐渐降低。高值区出现在水道和河口,冬季高于夏季,大、中潮高于小潮。泉州湾沉积物分布与水动力强弱环境呈很好的对应关系。晋江携带入海的泥沙是研究区的主要物源：海岸侵蚀来沙与湾外来沙也提供了部分物源。南、北水道分别属于落潮槽与涨潮槽两种不同性质的水道。北水道沉积物较细,以沉积作用为主,其入口处淤积程度较轻,而在上游淤积程度相对较重;南水道流速较大,沉积物较粗,是泥沙输运主要通道,地形变化不明显。     

《长春市城市总体规划》图集的编辑制作

简要阐述了用MapGIS、CoreIDRAW两种软件结合制作《长春市城市总体规划》图集的设计、编制方法,采用图层模式有效管理地图集的数据．根据实践得出了一些经验和技巧。     

山东南山集团东海热电厂地貌型态和泥沙淤积分析

通过分析东海热电厂厂址海域的底质和海岸型态、浅水区波浪、水体含沙量和沿岸输沙．为选择电厂取、排水口合理位置提供科学依据。