Characterization of cristobalite in ash and dome rock from the Soufriere Hills volcano, Montserrat： Implications for respiratory health hazards

A link between the inhalation of respirable silicas （SiO2） and respiratory diseases such as silicosis is widely recognized. Ash from dome collapse eruptions on Montserrat has been found to contain high levels （〉20%） of silicas in the form of cristobalite, tridymite, quartz and/or amorphous silica. The toxicity of these silica polymorphs varies widely. Cristobalite and quartz （tridymite less well established） are viewed as carcinogenic to humans whereas amorphous silica generally shows a reduced biological response. In assessing the potential health effects of volcanic ash particulates it is vital to determine the types and concentration of silicas as well as their size （respirable fraction）, shape and surface properties. The aim of this study is to develop methods to assess potentially toxic respirable airborne silicas in the dome collapse ash （applicable to a range of ash types） and to develop a model to predict the levels and types of respirable silicas from future eruptions. The model is being developed by comparing dome rock with related ash from a series of previous eruption events. Mineralogical assessment using conventional scanning X-ray diffraction （XRD） was hampered by difficulties in differentiating characteristic peaks for cristobalite and tridymite in complex multi-component ash samples （containing high levels of plagioclase）. These difficulties have been largely overcome using an Enraf-Nonius PDS120 diffractometer with curved （120 degrees 20） position sensitive detector （PSD）. The determination of size, shape and elemental characteristics of ash particulate and dome rock samples has been carried out using automated analytical scanning electron microscopy. The quantification of mineral proportions using PSD-XRD was highly successful with an accuracy of 1 to 2 wt%. However, the determination of phase proportions using automated analytical SEM was problematic due to scattering effects and the multiphase nature of many of the particles.     

In situ time resolved synchrotron powder diffraction study of thaumasite

Structural changes during dehydration and subsequent decomposition in thaumasite Ca₃Si(SO₄)(CO₃)(OH)₆·12 H₂O were studied by in situ synchrotron powder diffraction between 303 and 1,098 K. Evolution of the crystal structure was observed through 28 structure refinements, by full profile Rietveld analysis performed in the P6₃ space group, between 300 and 417 K, whereupon the thaumasite structure was observed to breakdown. Within this temperature range, the cell parameters of thaumasite increased as a function of temperature in a nearly linear fashion up to about 393 K, at which temperature, a slight slope change was observed. Above 400 K, the thermogravimetric analysis revealed that the dehydration process proceeded very rapidly while the refined occupancy of water molecules dropped below a critical level, leading to instability in the thaumasite structure. At a same time, a remarkable change in the unit cell parameters occurring at about 417 K indicated that the crystal structure of thaumasite collapsed on losing the crystallization water and it turned amorphous. This result indicated that the dehydration/decomposition of thaumasite was induced by the departure of the crystallization water. At about 950 K, anhydrite and cristobalite crystallized from the thaumasite glass.     

Alteration, evaluation and use of extremaduran granite residues

The necessity of eliminating debris from a granite quarry has awakened an interest in applications of by-products, called “marginal arids”, in different fields, like construction and foundations for roadways, restoration, material for the manufacture of artificial rocks, and artesian products etc. Conclusions obtained from the results of tests carried out by X-ray diffraction of granite quarry by-products in Extremadura, Spain, submitted to different treatments, are established. Test pieces from two quarries are analyzed and compared generally and specifically, for commercial use. Finally, conclusions relating to essays in test pieces and mineral dynamics of marginal arid granite are exposed.     

The vulnerability of karst springs—a case study of the Hubelj spring (SW Slovenia)

The hydraulic behaviour of the karst aquifer in the Hubelj spring catchment area (SW Slovenia) was studied by using an indirect research method based on natural tracers. The variations of natural tracers (in precipitation and in groundwater) during the storm event made possible the separation of the Hubelj spring storm hydrograph by the three-component separation technique. The results produced information on the aquifer recharge, storage and discharge processes, as well as on the mechanisms that affected them. They verified the so-called epikarst hypothesis presuming that an important part of a karst aquifer recharge reaches rapidly and intensively from the epikarst zone. It was demonstrated that epikarst water could occupy up to 50% of the spring discharge during precipitation events. This phenomenon could have important consequences on protection and management of the problems of karst aquifers, including engineering problems in karst areas. With this respect the results could give way to new engineering ideas.     

The effect of composition and cation ordering on the compressibility of columbites up to 7 GPa

The unit-cell parameters of two columbite samples along the (Fe,Mn)Nb₂O₆ solid solution were measured by means of high-pressure single-crystal X-ray diffraction up to pressures of 7 GPa. The compressional behaviour of these minerals was studied as a function of composition and degree of order. The P–V data of all the samples were fitted with a third-order Birch–Murnaghan equation of state. For the two samples with different compositions but identical degree of order the substitution of Mn for Fe causes a decrease of the bulk modulus K _T0, from 153(1) to 146(1) GPa, without any effect on the pressure first derivative K′. For the two samples with the same composition, cation ordering causes an increase of the bulk modulus from 149(1) to 153(1) GPa and of the pressure first derivative from 4.1(2) to 4.8(3). The compressional behaviour is anisotropic with a linear axial compressibility scheme β _b > β _c ≥ β _a for all samples, regardless of composition and degree of order. Such anisotropy increases sligthly with increasing Mn content.     

Evaluation of three waterborne polymers as stabilizers for sandy soil

This study reports on waterborne polymer emulsion systems that were used for structural modification of sandy soils. The first emulsion used was a styrene-acrylic, copolymer emulsion; the second and third were vinyl-acrylic, copolymer-based emulsions. Specimens were prepared by adding different polymer emulsions to the sand and water in prescribed amounts. The performance of the different emulsion systems as sand stabilizers was estimated through measurement of the hydraulic conductivity and compressive strength. Measurements of hydraulic conductivity were conducted in a flexible membrane test apparatus. The hydraulic conductivity for the three emulsions decreased at different rates, with an increase in polymer content up to 3 wt. (i.e., % by weight). Additional increase of polymer content did not introduce significant decrease in hydraulic conductivity, and, at 5 wt.%, the three emulsions had essentially the same effect. Measurements made on dry cylindrical specimens disclosed remarkable enhancement in the mechanical behavior of the system. The compressive strength and modulus of elasticity of the examined emulsions increased with a higher concentration of polymer. Scanning electron microscope (SEM) revealed that the reduction in the permeability and the improved mechanical properties can be attributed to three dominant structural changes: the development of interconnecting ties between the sand particles, the development of adhesion between neighboring sand particles in contact, and the covering of the sand particles with a thin polymer film.     

基于LSB的遥感图像安全传输模型

互联网在方便人们交流、共享信息的同时,也带来了极大的安全问题.信息隐藏是解决信息安全的一种有效手段,研究采用LSB法实现重要目标遥感图像信息的隐藏,实验证明该方法可以有效地解决网上图像传输出现的安全问题.     

面向对象的建模在GIS软件中的应用探讨

从GIS软件的特点出发，总结传统软件开发方法在GIS开发中的弊端，从而对面向对象技术在GIS软件建模中的应用进行了探讨。     

ODP204航次天然气水合物的可能有利储层——浊积层

为了解岩性在天然气水合物分布中的作用, 利用岩矿鉴定、扫描电镜和能谱法对ODP204航次的 4个站位 10个钻孔共计 115个沉积物样品进行分析, 发现沉积物中矿物成分基本相近, 以粘土矿物为主, 含少量以石英为主的陆源碎屑。样品中含有丰富的硅藻和有孔虫等微体化石, 可形成硅藻粘土—硅藻土、有孔虫硅藻土或凝灰质硅质生物粘土。石英碎屑大多呈棱角状, 粒径小、含量少, 同时, 样品中可见透镜体、团块或旋涡状层状结构以及杂乱堆积的斑杂构造。上述特征表明沉积物为含有大量深海或半深海的浊流沉积物或其夹层。由于钻井岩心中有相当部分的天然气水合物样品分布在上述沉积物中, 推断这些浊流沉积物很可能是ODP204航次天然气水合物的有利储层。