A new form of generalized Boussinesq equations for varying water depth

A new set of equations of motion for wave propagation in water with varying depth is derived in this study. The equations expressed by the velocity potentials and the wave surface elevations include first-order non-linearity of waves and have the same dispersion characteristic to the extended Boussinesq equations. Compared to the extended Boussinesq equations, the equations have only two unknown scalars and do not contain spatial derivatives with an order higher than 2. The wave equations are solved by a finite element method. Fourth-order predictor–corrector method is applied in the time integration and a damping layer is applied at the open boundary for absorbing the outgoing waves. The model is applied to several examples of wave propagation in variable water depth. The computational results are compared with experimental data and other numerical results available in literature. The comparison demonstrates that the new form of the equations is capable of calculating wave transformation from relative deep water to shallow water.     

Trichodesmium erythraeum (Ehrenberg) bloom along the southwest coast of India (Arabian Sea) and its impact on trace metal concentrations in seawater

The incidence of a large scale Trichodesmium erythraeum bloom along the southwest coast of India (Arabian Sea) observed in May 2005 is reported. Around 4802 filaments of T. erythraeum ml⁻¹ seawater was observed and a colony consisted of 3.6 × 10⁵ cells. The bloom was predominant off Suratkal (12° 59′N and 74° 31′E) with a depth of about 47 m, covering an area of 7 km in length and 2 km width. The concentrations of Zinc, Cadmium, Lead, Copper, Nickel and Cobalt were determined in samples collected from the bloom and non-bloom sites using stripping voltammetry. The observed hydrographical and meteorological parameters were found to be favorable for the bloom. The concentrations of Zinc, Cadmium and Nickel were found to be higher at bloom stations, while the concentrations of Lead, Copper and Cobalt were found to be very low at bloom stations. Elevated concentrations of Cadmium and Cobalt were observed at Valappad mainly due to the decomposition of detrital material produced in the bloom. Statistically significant differences (P > 0.01) in metal concentrations between the bloom and non-bloom stations were not observed except for Copper. Metals such as Lead, Copper and Cobalt were removed from the seawater at all places where bloom was observed. Cadmium was found to be slowly released during the decaying process of the bloom.     

Full-range nonlinear analysis of fatigue behaviors of reinforced concrete structures by finite element method

Ｆｕｌｌ－ｒａｎｇｅｎｏｎｌｉｎｅａｒａｎａｌｙｓｉｓｏｆｆａｔｉｇｕｅｂｅｈａｖｉｏｒｓｏｆｒｅｉｎｆｏｒｃｅｄｃｏｎｃｒｅｔｅｓｔｒｕｃｔｕｒｅｓｂｙｆｉｎｉｔｅｅｌｅｍｅｎｔｍｅｔｈｏｄ￥ＳｏｎｇＹｕｐｕ；ＺｈａｏＳｈｕｎｂｏ；ＷａｎｇＲｕｉｍ...     

标志沉积层磁组构特征及其古环境意义研究

通过对长江三角洲及其邻近区域埋藏古土壤、潮坪、长江下游河道浸滩、舟山滨岸风成沙丘、南京黄土古土壤序列沉积体的磁组构测量统计分析，取得了各自的标志特征。该２特征揭示出，舟山滨岸风成沙丘与南京黄土吉土壤序列沉积的搬运介质能量位相基本一致，其物源来向却显示出巨大差异；上述两类沉积体与上述现今潮坪、河道漫滩沉积体地搬运介质能量位相及物源来向均显示出绝然不同的标志特征。然而浸滩物源来民南京黄土的物尖兵为向却     

Numerical Analysis of Wave Forces on Arbitrarily Shaped Multi-Pillars Over Varying Topography

The modified hybrid element method (MHEM) is utilized to predict and analyze wave forces on arbitrarily shaped multiple bodies. This method can be applied to waves of all water depths, i. e. shallow, intermediate, and deep waters, on slowly varying seabed. The MHEM employs the ICCG method to save CPU and storage, thus the computation of wave forces for large multi-body systems can be carried out on microcomputers. Numerical results of the present method are compared with experimental data and other solutions. It is shown that the MHEM provides more accurate solutions of the wave forces than other numerical methods do. Therefore, the methodology presented herein can be used in the design of coastal and ocean structures.     

Elasto-Plastic Analysis of Tubular Joints of Offshore Platforms by Finite Element Method

The plastic node method is reformulated by the variational principle and is applied to elasto-plastic finite element analysis of tubular joints, eventually including the effect of internal and external gussets, stiffener rings, etc., if necessary. Four different joints are studied here in detail for the elasto-plastic behavior, the strain at the hot spot, the strain concentration factor around the intersection line, and the propagation of the plastic region with loading up to collapse in order to determine the ultimate strength, safety factor, and development of the plastic field. The present results are in good agreement with the experimental results.     

中国多金属结核开辟区间隙水中铜、锰、镍的分布规律

通过对东北太平洋海域中国多金属结核开辟区沉积物间隙水中铜、锰、镍等微量元素的详细研究表明,锰主要受沉积环境的影响,其含量的变化范围在0.16～8.61μg/dm3之间;铜和镍则主要与表层海水的初级生产力有关,研究区内间隙水中铜和镍含量的变化范围分别为0.16～20.8和0.80～3.12μg/dm3,且这些元素在沉积物—水界面处均存在最大浓度梯度.利用“Fick扩散定律”计算表明,锰在研究区主要是从上覆海水向沉积物扩散,是沉积物中锰的主要来源之一;而铜和镍则是从沉积物向上覆海水扩散,是底层海水中铜和镍的主要来源。与表层海水中铜和镍向底层海水的输送通量计算结果相比,底层海水中铜和镍的含量主要受沉积物的控制.     

脱盐处理对钢样-砂浆界面微观结构的影响

运用扫描电镜(SEM)和X-射线衍射(XRD)技术研究了电化学脱盐处理对钢样-砂浆界面微观结构的影响。试验结果表明，经电化学脱盐处理后，钢样-砂浆界面的微观形貌特征与组成发生了明显的变化。