Naturally acidic and metalliferous waters at unmined volcanogenic massive sulfide deposits in the Bonnifield mining district, Alaska Range, east-central Alaska

The Bonnifield district hosts 26 tmmined volcanogenic massive sulfide （VMS） occurrences. Environmental geochemical samples of water and stream sediment were collected at several occurrences, concentrating on the two best-exposed and largest deposits, Red Mountain （RM） and Sheep Creek （SC）. Limited samples were also collected at the poorly exposed WTF deposit. The deposits are Late Devonian to Early Mississippian, and are hosted by felsic metavolcanic and carbonaceous schist members of the Totatlanika Schist or Keevy Peak Fm. Spring and stream waters at RM and SC have pH values commonly 〈3.5 （as low as 2.4 at RM and 2.5 at SC）, high conductivity （up to 11000 μS/cm）, and very high （Is to 100s mg/L） dissolved contents of Al, Cd, Co, Cu, Fe, Ni, and Pb. Waters at RM are characterized by extremely high REE contents （summed REE median 3200 μg/L, n=33）. At both RM and SC, pyrite oxidation and dissolution produce low pH waters that interact with and dissolve bedrock minerals, resulting in acidic, metal-laden, naturally degraded streams that are mostly devoid of aquatic life. Ferricrete is common. In contrast, WTF barely produces a surficial environmental footprint, mostly due to topography and relief. RM and SC are well exposed in the areas of relatively high relief, and both exhibit extensive areas of quartz-sericite-pyrite-alteration. While WTF shares many of the same deposit-and alteration characteristics, it is concealed by tundra in a large, nearly flat area. Surface water at WTF is absent and outcrops are sparse. Even though WTF is roughly the same size as Red Mountain （both around 3 million tonnes） and has similar base- and precious-metal grades, the surficial geochemical manifestation of WTF is minimal. However, exposure through mining of the altered, mineralized rock at WTF potentially could initiate the same processes of pyrite oxidation, acid generation, and mineral dissolution that are observed naturally at RM and SC.     

Performance of Mortar and Chemical Grout Injection into Surrounding Soil When Slurry Pipe-jacking Method is Used

Small-diameter shallow tunnels are often being built by using the slurry pipe-jacking method. This system involves the pushing or thrusting of a drivage machine and concrete pipes into the ground. Chemical grout injection into the surrounding soil around the tunnel is carried out after the drivage and pushing processes are finished. The purpose of the chemical grout injection is to maintain permanent stability of the surrounding soil. However, the behavior of the chemical grouting material in the surrounding soil around the tunnel and the amount of optimum injection is not clearly understood. From these points of view, this paper discusses the performance of the chemical grouting material, when it is injected into the surrounding soil around the tunnel, by means of 2-D Eulerian–Lagrangian seepage analysis. Moreover, the effectiveness of the chemical grout injection was evaluated by using the non-linear finite element method. This investigation show when the range of the grouted zone is designed; it is necessary that the relationship between Young’s modulus of the soil/grouted zone and the confining stress be taken into consideration in order to establish effective, economical and safe chemical grout injection system. Understanding the performance of the seepage/dispersion behavior of the chemical grout and the characteristics of soil/ grouted zone is also important.     

Comparison of methods to model the gravitational gradients from topographic data bases

A number of methods have been developed over the last few decades to model the gravitational gradients using digital elevation data. All methods are based on second-order derivatives of the Newtonian mass integral for the gravitational potential. Foremost are algorithms that divide the topographic masses into prisms or more general polyhedra and sum the corresponding gradient contributions. Other methods are designed for computational speed and make use of the fast Fourier transform (FFT), require a regular rectangular grid of data, and yield gradients on the entire grid, but only at constant altitude. We add to these the ordinary numerical integration (in horizontal coordinates) of the gradient integrals. In total we compare two prism, two FFT and two ordinary numerical integration methods using 1" elevation data in two topographic regimes (rough and moderate terrain). Prism methods depend on the type of finite elements that are generated with the elevation data; in particular, alternative triangulations can yield significant differences in the gradients (up to tens of Eötvös). The FFT methods depend on a series development of the topographic heights, requiring terms up to 14th order in rough terrain; and, one popular method has significant bias errors (e.g. 13 Eötvös in the vertical–vertical gradient) embedded in its practical realization. The straightforward numerical integrations, whether on a rectangular or triangulated grid, yield sub-Eötvös differences in the gradients when compared to the other methods (except near the edges of the integration area) and they are as efficient computationally as the finite element methods.     

Dissolved trace elements in river water: spatial distribution and the influencing factor, a study for the Pearl River Delta Economic Zone, China

Twenty-nine water samples were collected from different river channels of the Pearl River Delta Economic Zone, China. An inductively coupled plasma-mass spectromonitor (ICP-MS) was used to measure concentrations of the trace elements in these samples. The results suggest that the average concentrations of rare earth elements in river water show an increasing trend from the West River, the North River, the rivers of the Pearl River Delta, and the Shenzhen River to the East River. Relatively high concentrations of heavy metals appear in the East River, the rivers of the Pearl River Delta and the Shenzhen River, while the West River and the North River have relatively low heavy metal concentrations. Trace element concentrations in samples collected near urban or industrial areas are much higher than those of samples collected from distant areas, away from urban and industrial areas. After natural conditions, human activities have significant influence on the trace element concentrations in river water. This trace element concentration’s spatial distribution in the river water from the Pearl River Delta Economic Zone is actually an integrated effect of natural conditions and human activity.     

要十分重视另一类型地质灾害的防治

文章提出另一类型地质灾害,即化学型地质灾害的定义及其分类。并认为化学型地质灾害不像物理型地质灾害那样发生瞬时灾害,而有一个延缓过程,但是一旦发生,难于挽救。化学型地质灾害体的主体是化学元素,开展地球化学调查,研究化学元素的赋存规律、土壤及沉积物承受各类元素的极限、各类元素活化的条件是揭示诱发化学型地质灾害机理的关键。因此要十分重视与加强化学型地质灾害的调查、研究、监测与治理工作。     

华南地区晚二叠和晚三叠世煤中稀土元素特征研究

在华南地区贵州六盘水、江西乐平、露庆和湖北黄石矿区晚二叠和晚三叠世煤层的稀土元素ICP—MS分析数据的基础上，系统研究了研究区煤中稀土元素的含萤分布特征、赋存特征、配分模式以及地质控制因素。含量分布表明晚二叠世稀土元素含量总体高于晚三叠世；煤中稀土元素与灰分成正相关关系，部分煤样品由于有富稀土元素的重矿物组合的存在而出现稀土元素的异常高值；同一矿区、同一时代煤中稀土元素的配分模式具有一定的相似性，而不同地区同一时代和同一地区不同时代煤中稀土元素的配分模式具有较大差异；煤的沉积环境，煤中无机矿物组成以及海水的影响是控制煤中稀土元素含量和配分模式的主要地质因素。     

Dissolved Trace Metal–Organic Complexes in the Lot–Garonne River System Determined Using the C18 Sep-Pak System

An 11-month observation of dissolved and particulate organic matter, chlorophyll a(Chl a), C18 Sep-Pak extractable hydrophobic dissolved organic matter (hDOM) fraction and associated dissolved trace metals (Cd, Cu, V, Co, Ni, Mo, U) was performed in the Lot–Garonne River system. This system includes the Riou Mort, the Lot River and the downstream reaches of the Garonne River and represents the fluvial transport path of trace metals between the major point source of polymetallic pollution, located in the Riou Mort watershed and the Gironde estuary. Spatial and temporal variations of dissolved and particulate organic carbon and Chl areflect the presence of different types of organic matter and their relation with the hDOM fraction. Maximum Chl a/POC ratios (up to 0.03), indicate intense phytoplankton production from March to May. In the Lot River (Temple), DOC and POC concentrations were clearly higher and mean Chl a concentration (2.8 mg g⁻¹) was about three times higher than those of the other sites. High Chl a/POC ratios suggest high phytoplankton activity with maxima in spring and late summer. In the Riou Mort River, very high POC concentrations of up to 40 (mean: 20) occurred, whereas Chl a concentrations were relatively low indicating low phytoplankton activity. High, strongly variable DOC and POC concentrations suggest important natural (Carboniferous soils, forests) or anthropogenic (e.g., former coal mines, waste areas, agriculture, sewage) carbon sources within the small Riou Mort watershed. Despite high DOC concentrations in the Riou Mort River, hDOM metal fractions were generally lower than those at the other sites. The general order of decreasing binding strength between metals and the organic hydrophobic phase (Cu, U > Co, Ni > V, Mo > Cd) at all four sites was in good agreement with the Irving–William series of transition element affinity towards organic ligands. Accordingly, the role of the hydrophobic phase in dissolved Cd transport appeared to be negligible, whereas the hDOM–Cu fraction strongly contributed to dissolved Cu transport.     

下庄铀矿田337矿床成矿流体稀土元素示踪

337铀矿床位于下庄矿田东缘,区内发育近EW向、NNE向构造裂隙群及NW向辉绿岩和正长岩脉体,发育以碱性为主的多种围岩蚀变。区内矿床主要赋矿围岩的稀土元素特征属壳源型。矿石内金属矿物以沥青铀矿为主,矿石的LREE/HREE比值为3.25,Sm/Nd比值平均为0.307,Ce/Yb比值为7.127,这些数据都显示出成矿流体具有较深来源。矿石较围岩亏损稀土元素尤其是轻稀土元素,稀土元素分布模式平缓,与幔源辉绿岩特别是与正长岩的稀土元素分布模式相近,负铕异常比围岩更为强烈,反映成矿流体的来源具有幔源性。结合区域地质特征,可以认为337矿床成矿流体来源具有幔源性质。