新疆乌鲁木齐台地电阻率变化及震兆特征

以乌鲁木齐地电阻率观测资料为依据,在展示其变化特征的基础上,对该地电阻率资料异常变化与近区中强地震及部分远区的大地震之间的关系进行了归纳、分析与讨论。对地电阻率前兆异常形态与地震之间的关系进行了探讨。     

任意刚性基础竖向动阻抗的简化计算

对于均质弹性半空间上的任意形状的刚性明置和埋置基础,其动刚度和阻尼系数的确定,已有很多这方面的研究。通常基础的任意形状用其外包的规则几何形状代替原有的不规则基础形状,以达到确定动刚度和阻尼系数的目的,而且这两个参数的确定仅仅是对单独刚性基础的,无法考虑相邻基础对其产生的影响。针对上述两方面不完善之处作了进一步探讨,引入相邻基础动力相互作用因子的概念,并利用地基为平面应变假定以求之。推荐的方法经验证,非常准确。     

乌加河地震台地电阻率干扰形态识别

选取乌加河地震台2015-2018年地电阻率观测资料,分析数据异常变化,结合观测环境及实地调查,发现存在降雨、雷电、金属管线、农田灌溉、设备漏电等影响因素,对比分析并总结各类干扰曲线形态、变化幅度、影响时间、干扰频次等特征,以便正确认识并排除地电阻率干扰,为地震异常信息识别提供帮助。     

Computational study of self‐centering buckling‐restrained braced frame seismic performance

Recent research developed and experimentally validated a self‐centering buckling‐restrained brace (SC‐BRB) that employs a restoring mechanism created using concentric tubes held flush with pretensioned shape memory alloy rods, in conjunction with a buckling‐restrained brace (BRB) that dissipates seismic energy. The present computational study investigated how the SC‐BRB can be implemented in real buildings to improve seismic performance. First, a computational brace model was developed and calibrated against experimental data, including the definition of a new cyclic material model for superelastic NiTi shape memory alloy. A parametric study were then conducted to explore the design space for SC‐BRBs. Finally, a set of prototype buildings was designed and computationally subjected to a suite of ground motions. The effect of the lateral resistance of gravity framing on self‐centering was also examined. From the component study, the SC‐BRB was found to dissipate sufficient energy even with large self‐centering ratios (as large as 4) based on criteria found in the literature for limiting peak drifts. From the prototype building study, a SC‐BRB self‐centering ratio of 0.5 was capable of reliably limiting residual drifts to negligible values, which is consistent with a dynamic form of self‐centering discussed in the literature. Because large self‐centering ratios can create significant overstrength, the most efficient SC‐BRB frame designs had a self‐centering ratio in the range of 0.5–1.5. Ambient building resistance (e.g., gravity framing) was found to reduce peak drifts, but had a negligible effect on residual drifts. Copyright © 2014 John Wiley & Sons, Ltd.     

SMA复合摩擦阻尼器性能的试验研究

利用形状记忆合金(SMA)的超弹性效应及高阻尼性能,结合传统Pall摩擦型阻尼器的特点,提出了一种SMA复合摩擦阻尼器。在建立阻尼器力学分析模型的基础上,对SMA复合摩擦阻尼器的性能进行了试验研究,分析了位移幅值、加载频率等对阻尼器的等效刚度、单位循环耗能和等效阻尼比的影响,并与理论分析结果进行了对比。研究表明,SMA复合摩擦阻尼器在加卸载循环下会形成比较稳定的滞回曲线,表明这种阻尼器具有良好的耗能能力。     

波形差异反演方法及其在气藏描述中的应用

在油气藏开发中后期,如何利用的已有的勘探成果和丰富的油气藏知识,加深对勘探区域油气开发潜力的认识,为油气田的稳产高产服务,是摆在油气田中后期开发人员面前的难题.油气田开发的研究人员,利用现有的资料,开发出了很多方法,结合地震测井等资料为油气田的稳产高产做出了巨大的贡献.本文在分析了地震波在地质体中传播过程中能量变化,相应的产生了振幅变化的理论,利用三维地震数据,通过对三维地震数据解释层位对应的波形差异的分析,结合工区内的生产井和开发井的对应地层中的油气信息,进行反演得到地层的波形差异数据体,利用相应的绘图软件绘制二维平面图形,结合工区内的沉积相等地质信息对其数据体进行油藏解释,最终得到波形差异反演数据体,利用波形差异反演数据体进行油气藏的识别、描述和预测,为油气田的中后期开发服务.     

Self‐centering structural systems with combination of hysteretic and viscous energy dissipations

This paper presents an innovative set of high‐seismic‐resistant structural systems termed Advanced Flag‐Shaped (AFS) systems, where self‐centering elements are used with combinations of various alternative energy dissipation elements (hysteretic, viscous or visco‐elasto‐plastic) in series and/or in parallel. AFS systems is developed using the rationale of combining velocity‐dependent with displacement‐dependent energy dissipation for self‐centering systems, particularly to counteract near‐fault earthquakes. Non‐linear time‐history analyses (NLTHA) on a set of four single‐degree‐of‐freedom (SDOF) systems under a suite of 20 far‐field and 20 near‐fault ground motions are used to compare the seismic performance of AFS systems with the conventional systems. It is shown that AFS systems with a combination in parallel of hysteretic and viscous energy dissipations achieved greater performance in terms of the three performance indices. Furthermore, the use of friction slip in series of viscous energy dissipation is shown to limit the peak response acceleration and induced base‐shear. An extensive parametric analysis is carried out to investigate the influence of two design parameters, λ₁ and λ₂ on the response of SDOF AFS systems with initial periods ranging from 0.2 to 3.0 s and with various strength levels when subjected to far‐field and near‐fault earthquakes. For the design of self‐centering systems with combined hysteretic and viscous energy dissipation (AFS) systems, λ₁ is recommended to be in the range of 0.8–1.6 while λ₂ to be between 0.25 and 0.75 to ensure sufficient self‐centering and energy dissipation capacities, respectively. Copyright © 2010 John Wiley & Sons, Ltd.     

Shaking‐table tests on reinforced concrete frames with different isolation systems

The effectiveness of seismic isolation in protecting structural and non‐structural elements from damage has been assessed in an extensive programme of shaking‐table tests, carried out on four identical 1/3.3‐scale, two‐dimensional, reinforced concrete (R/C) frames. Four different isolation systems were considered, namely: (i) rubber‐based, (ii) steel‐based, (iii) shape memory alloy (SMA)‐based and (iv) hybrid, i.e. based on both SMA and steel components, isolation systems. This paper presents a comprehensive overview of the main results of the experimental tests on base‐isolated models, whose structural response is described through: (i) maximum base displacements; (ii) maximum interstorey drifts; (iii) maximum storey accelerations and (iv) maximum storey shear forces. The evolution of the fundamental frequency of vibration of the R/C frame during the tests is also described. The beneficial effects of using base isolation resulted in no or slight damage, under strong earthquakes, to both structural and non‐structural members, as well as to the internal content of the building. The comparison with the experimental results obtained in shaking‐table tests on similar fixed‐base models emphasizes these positive aspects. Finally, advantages and drawbacks related to the use of each isolation system are discussed in the paper. Copyright © 2006 John Wiley & Sons, Ltd.     

多维地震作用下大跨空间结构的减震控制分析

考虑到多维地震输入对网架结构的不利影响,基于形状记忆合金超弹性,研制出一种兼具自复位、高耗能及放大功能于一体的形状记忆合金复合黏滞阻尼器(Hybrid Shape Memory Alloy Viscous Dampers,简称HSMAVD),并通过试验研究该阻尼器在循环荷载作用下的力学性能;然后以平面四角锥网架模型为基础,将该阻尼器替换部分网架结构杆件,并分析该阻尼器减震控制效果。结果表明形状记忆合金与黏滞阻尼器复合后具有良好的协同工作能力,可有效发挥形状记忆合金的超弹性和黏滞阻尼器的速度相关特性,使其具有稳定的滞回性能和良好的耗能能力;采用阻尼杆件替换原杆件的方法既能对结构进行有效的减震控制,又不改变原有的结构形式,是一种优越的减震控制方法,并为HSMAVD被动控制系统在结构抗震中的实际应用提供新思路。     

位场解析信号振幅极值位置空间变化规律研究

通过对单一边界、双边界、多边界以及点(线)质量模型重力异常解析信号振幅和重力异常垂向导数解析信号振幅的极值位置空间变化规律研究表明,重力异常垂向导数解析信号振幅和化极磁力异常解析信号振幅的极值位置相同,且与重力异常解析信号振幅的极值位置空间变化规律相似.利用位场解析信号振幅极大值位置能够准确识别单一直立边界地质体的边缘位置,但不能准确识别其它任何形体的边缘位置,其识别结果的偏移量大小随地质体的埋深、水平尺寸以及倾斜程度等变化.虽然重力异常垂向导数解析信号振幅比重力异常解析信号振幅的峰值更加尖锐、横向识别能力更强,其极大值位置更靠近地质体上顶面边缘位置,但均受地质体埋深的影响较大;随着埋深的增加,位场解析信号振幅的极大值位置会快速收敛到形体的"中心位置",其轨迹类似"叉子状";且对多边界模型会出现"极大值位置盲区"而无法识别其边缘位置.通过这些理论研究表明,位场解析信号振幅只能识别单一边界地质体的边缘位置;而不宜用来识别多边界地质体的边缘位置,但可以用来识别多边界地质体的"中心位置".