Reaction softening by dissolution–precipitation creep in a retrograde greenschist facies ductile shear zone,New Hampshire,USA

We describe strain localization by a mixed process of reaction and microstructural softening in a lower greenschist facies ductile fault zone that transposes and replaces middle to upper amphibolite facies fabrics and mineral assemblages in the host schist of the Littleton Formation near Claremont, New Hampshire. Here, Na‐poor muscovite and chlorite progressively replace first staurolite, then garnet, and finally biotite porphyroblasts as the core of the fault zone is approached. Across the transect, higher grade fabric‐forming Na‐rich muscovite is also progressively replaced by fabric‐forming Na‐poor muscovite. The mineralogy of the new phyllonitic fault‐rock produced is dominated by Na‐poor muscovite and chlorite together with late albite porphyroblasts. The replacement of the amphibolite facies porphyroblasts by muscovite and chlorite is pseudomorphic in some samples and shows that the chemical metastability of the porphyroblasts is sufficient to drive replacement. In contrast, element mapping shows that fabric‐forming Na‐rich muscovite is selectively replaced at high‐strain microstructural sites, indicating that strain energy played an important role in activating the dissolution of the compositionally metastable muscovite. The replacement of strong, high‐grade porphyroblasts by weaker Na‐poor muscovite and chlorite constitutes reaction softening. The crystallization of parallel and contiguous mica in the retrograde foliation at the expense of the earlier and locally crenulated Na‐rich muscovite‐defined foliation destroys not only the metastable high‐grade mineralogy, but also its stronger geometry. This process constitutes both reaction and microstructural softening. The deformation mechanism here was thus one of dissolution–precipitation creep, activated at considerably lower stresses than might be predicted in quartzofeldspathic rocks at the same lower greenschist facies conditions.     

An improved building detection approach using L-band POLSAR two-dimensional time-frequency decomposition over oriented built-up areas

The objective of this study is to efficiently extract detailed information about various man-made targets in oriented built-up areas using polarimetric synthetic aperture radar (POLSAR) images. This paper develops an improved approach for building detection by utilizing Two-Dimensional Time-Frequency (2-D TF) decomposition. This method performs outstandingly in distinguishing between man-made and natural targets based on the isotropic behaviors, frequency-sensitive responses, and scattering mechanisms of objects. The proposed method can preserve the spatial resolution and exploit the advantages of TF decomposition; specifically, the exact outlines of buildings can be effectively located, and more types of features (e.g., flat roofs, roads, and walls that are oblique to the radar illumination) can be distinguished from forests in complex built-up areas by 2-D TF decomposition. The coarser-resolution subaperture images that are produced in the azimuth direction, which correspond to different looking angles, are beneficial for detecting man-made structures with main scattering centers oriented at oblique angles with respect to the radar illumination. In the range direction, the obtained subaperture images, which correspond to various observation frequencies, can be helpful in distinguishing flat roofs and roads from forests. This method was successfully implemented to analyze both NASA/JPL L-band AIRSAR and L-band EMISAR data sets. The building detection results of the proposed method exhibit a significant improvement over those of other methods and reach an overall accuracy over 80%, with approximately 20% higher than the accuracies of K-means clustering and the entropy/alpha-Wishart classifier and approximately 10% higher than the accuracy of the support vector machine method. Moreover, building details can be precisely detected, obliquely oriented buildings can be identified, and the distinction between buildings and forests is significantly improved, as both visually and statistically indicated. This method is highly adaptable and has substantial application value.     

基于小波变换法定义的波群参数

通过小波变换分析的波能过程定义了两个描述波浪群性的参数,由数值模拟波浪和实测波浪资料对其与常用的波群参数进行对比分析,结果表明基于小波波能过程定义的群性参数是有效的,从而展示了小波变换用于在时频域上分析波群的能力。详细探讨了波浪记录长度对群性参数稳定性的影响,分析结果表明,波浪观测长度对于波群参数的影响较大,在考虑波浪群性的波浪模拟及分析时,建议模拟时间长度应在400~500个波以上。     

The strain‐dependent spatial evolution of garnet in a high‐P ductile shear zone from the Western Gneiss Region (Norway): a synchrotron X‐ray microtomography study

Reaction and deformation microfabrics provide key information to understand the thermodynamic and kinetic controls of tectono‐metamorphic processes, however, they are usually analysed in two dimensions, omitting important information regarding the third spatial dimension. We applied synchrotron‐based X‐ray microtomography to document the evolution of a pristine olivine gabbro into a deformed omphacite–garnet eclogite in four dimensions, where the 4^th dimension is represented by the degree of strain. In the investigated samples, which cover a strain gradient into a shear zone from the Western Gneiss Region (Norway), we focused on the spatial transformation of garnet coronas into elongated garnet clusters with increasing strain. The microtomographic data allowed quantification of garnet volume, shape and spatial arrangement evolution with increasing strain. The microtomographic observations were combined with light microscope and backscatter electron images as well as electron microprobe (EMPA) and electron backscatter diffraction (EBSD) analysis to correlate mineral composition and orientation data with the X‐ray absorption signal of the same mineral grains. With increasing deformation, the garnet volume almost triples. In the low‐strain domain, garnet grains form a well interconnected large garnet aggregate that develops throughout the entire sample. We also observed that garnet coronas in the gabbros never completely encapsulate olivine grains. In the most highly deformed eclogites, the oblate shapes of garnet clusters reflect a deformational origin of the microfabrics. We interpret the aligned garnet aggregates to direct synkinematic fluid flow, and consequently influence the transport of dissolved chemical components. EBSD analyses reveal that garnet shows a near‐random crystal preferred orientation that testifies no evidence for crystal plasticity. There is, however evidence for minor fracturing, neo‐nucleation and overgrowth. Microprobe chemical analysis revealed that garnet compositions progressively equilibrate to eclogite facies, becoming more almandine‐rich. We interpret these observations as pointing to a mechanical disintegration of the garnet coronas during strain localization, and their rearrangement into individual garnet clusters through a combination of garnet coalescence and overgrowth while the rock was deforming.     

Shear wave propagation along infinite slopes: A theoretically based numerical study

In this paper, the seismic response of ‘infinitely’ long slopes is numerically analysed via the formulation of a 1D analytical/numerical model, in which the soil mechanical behaviour is assumed to be elasto‐perfectly viscoplastic and simple shear (SS) kinematical constraints are imposed. In order to simplify the problem, a theoretically based procedure to set up a fully 1D shear constitutive model is defined, within which the mechanical response of a multiaxial relationship is condensed. The use of a 1D shear constitutive model is aimed at reducing the number of unknowns and, therefore, the computational costs. In particular, the case of the Mohr–Coulomb yield criterion is considered, while an enhanced Taylor–Galerkin finite element algorithm is employed to simulate the seismic wave propagation within the soil stratum. The proposed ‘condensation’/calibration procedure captures both the ‘pseudo’‐hardening pre‐failure behaviour and the influence of dilation on the occurrence of strain‐localization, which characterize, under SS conditions, the static response of virgin perfectly plastic soils. The effectiveness of the conceived method is shown with reference to freshly deposited deposits, while, in the case of highly overconsolidated strata, some difficulties arise because of the brittle behaviour induced both by unloading and non‐associativeness. Copyright © 2011 John Wiley & Sons, Ltd.     

Research of pattern dynamics parameters of crustal deformation field in seismogenic process

ＲｅｓｅａｒｃｈｏｆｐａｔｔｅｒｎｄｙｎａｍｉｃｓｐａｒａｍｅｔｅｒｓｏｆｃｒｕｓｔａｌｄｅｆｏｒｍａｔｉｏｎｆｉｅｌｄｉｎｓｅｉｓｍｏｇｅｎｉｃｐｒｏｃｅｓｓＳｈｕｏ－ＹｕＺＨＯＵ（周硕愚），ＹｕｎＷＵ（吴云），Ｒｕｏ－ＢｏＷＡＮＧ（王若柏）ａｎｄ...     

Compaction localization in the Earth and the laboratory: state of the research and research directions

Localized compaction in porous rocks is a recently recognized phenomenon that has been shown to reduce permeability dramatically. Consequently, the phenomenon is relevant to a variety of technologies involving fluid injection or withdrawal. This article summarizes current understanding of localized compaction and impediments to further progress. The article is based on discussions at a small workshop on localized compaction sponsored by the Office of Science, U. S. Department of Energy.     

剪切带倾角尺度律与局部化启动跳跃稳定研究

研究了剪切带倾角是如何依赖于岩样高度以及剪切带的不稳定性。建立了准脆性材料试件剪切带倾角尺度效应模型,得到了剪切带倾角尺度效应的解析解,且与实验结果比较相符。研究结果表明:剪切带倾角随着试件高度的增加而增加,但其增加幅逐渐减缓,最终趋于稳定值。笔者还对剪应变局部化启动、跳跃和稳定进行了理论分析,解释了实验所观测到的剪切带跳跃现象和砂岩岩样应变局部化较煤样滞后的原因。剪应变局部化是否发生跳跃,关键取决于全程应力-应变曲线软化段是否存在拐点。对于没有拐点的情形,宏观剪切带图案不跳跃。局部化是导致准脆性材料试件剪切带倾角尺度效应的原因。     

河南平顶山平煤矿区天然地震、爆破、塌陷时频特征分析

选取2019年3月—8月河南平顶山市宝丰县平煤矿区发生的ML 2.0—2.9天然地震、爆破、塌陷等9次震动事件,在区域地质构造背景和波形特征分析基础上,采用短时傅里叶变换(STFT)方法开展时频波谱分析,提取不同类型事件的时频特征。结果显示:(1)天然地震频率成分丰富,且高、低频分布均匀,P波在约3 Hz和8 Hz处存在2个峰值,S波存在多个峰值;(2)爆破事件的时频谱相对集中,以低频为主,P波频率峰值约5Hz,信号主频随时间变化,大致呈线性降低至1—2 Hz;(3)塌陷事件频率成分以4 Hz以下的低频为主,P波无明显峰值且频率成分单一,主频出现在2 Hz左右的面波。本文结果可为今后该矿区震动事件类型判断提供参考依据。     

Geospatial technologies for Chang’e-3 and Chang’e-4 lunar rover missions

ABSTRACT

This paper presents a brief overview of the geospatial technologies developed and applied in Chang’e-3 and Chang’e-4 lunar rover missions. Photogrammetric mapping techniques were used to produce topographic products of the landing site with meter level resolution using orbital images before landing, and to produce centimeter-resolution topographic products in near real-time after landing. Visual positioning techniques were used to determine the locations of the two landers using descent images and orbital basemaps immediately after landing. During surface operations, visual-positioning-based rover localization was performed routinely at each waypoint using Navcam images. The topographic analysis and rover localization results directly supported waypoint-to-waypoint path planning, science target selection and scientific investigations. A GIS-based digital cartography system was also developed to support rover teleoperation.