Multifield coupling model and its applications for pile foundation in permafrost

In the construction of Qinghai-Tibet railway,to avoid diseases caused by frost heave and thaw col-lapse of frozen ground,besides the normal bridges over the rivers,a lot of dry bridge structures have been built to replace subgrade in the regions of high tem-perature and high ice content frozen soil.So,the problems on forming mechanism of bearing capacity of pile foundation in cold regions already become one of hot spot problems in frozen soil engineering.Freezing force and frost heave force ar…     

Converted-wave seismology in anisotropic media revisited,Part I: Basic theory

We have developed new basic theories for calculating the conversion point and the travel time of the P-SV converted wave (C-wave) in anisotropic, inhomogeneous media. This enables the use of conventional procedures such as semblance analysis, Dix-type model building and Kirchhoff summation, to implement anisotropic processing, and makes anisotropic processing affordable. Here we present these new developments in two parts: basic theory and application to velocity analysis and parameter estimation. This part deals with the basic theory, including both conversion-point calculation and moveout analysis. Existing equations for calculating the PS-wave (C-wave) conversion point in layered media with vertical transverse isotropy (VTI) are strictly limited to offsets about half the reflector depth (an offset-depth ratio, xlz, of 0.5), and those for calculating the C-wave traveltimes are limited to offsets equal to the reflector depth (x/z=l.0). In contrast, the new equations for calculating the conversion-point extend into offsets about three-times the reflector depth (x/z=3.0), those for calculating the C-wave traveltimes extend into offsets twice the reflector depth (x/z=2.0). With the improved accuracy, the equations can help in C-wave data processing and parameter estimation in anisotropic, inhomogeneous media. This work is funded by the Edinburgh Anisotropy Project (EAP) of the British Geological Survey. First author: Xiangyang Li, Mr. Li is currently a professorial research seismologist (Grade 6) and technical director of the Edinburgh Anisotropy Project in the British Geological Survey. He also holds a honorary professorship in multicomponent seismology at the School of Geosciences, University of Edinburgh. He received his BSc(1982) in Geophysics from Changchun Geological Institute, China, an MSc (1984) in applied geophysics from East China Petroleum Institute (now known as the China University of Petroleum), and a PhD (1992) in seismology from the University of Edinburgh. During 1984–1987, he worked as a lecturer with the East China Petroleum Institute. Since 1991, he has been employed by the British Geological Survey. His research interests include seismic anisotropy and multicomponent seismology.     

Study on simulating strong ground motion by fractal stochastic method

The time history of strong ground motion can be synthesized by empirical Green's function (EGF) method.Firstly a large seismic event is discretized into a series of subevents; secondly recordings of earthquakes with proper size and spatial distribution are chosen as time history (EGF) of those subevents; finally the EGFs are summated to get the time history of ground motion caused by the large event.     

On the variability of the flow along the Meso-American Barrier Reef system: a numerical model study of the influence of the Caribbean current and eddies

A high resolution (3–8 km grid), 3D numerical ocean model of the West Caribbean Sea (WCS) is used to investigate the variability and the forcing of flows near the Meso-American Barrier Reef System (MBRS) which runs along the coasts of Mexico, Belize, Guatemala and Honduras. Mesoscale variations in velocity and temperature along the reef were found in seasonal model simulations and in observations; these variations are associated with meandering of the Caribbean current (CC) and the propagation of Caribbean eddies. Diagnostic calculations and a simple assimilation technique are combined to infer the dynamically adjusted flow associated with particular eddies. The results demonstrate that when a cyclonic eddy (negative sea surface height anomaly (SSHA)) is found near the MBRS the CC shifts offshore, the cyclonic circulation in the Gulf of Honduras (GOH) intensifies, and a strong southward flow results along the reef. However, when an anticyclonic eddy (positive SSHA) is found near the reef, the CC moves onshore and the flow is predominantly westward across the reef. The model results help to explain how drifters are able to propagate in a direction opposite to the mean circulation when eddies cause a reversal of the coastal circulation. The effect of including the Meso-American Lagoon west of the Belize Reef in the model topography was also investigated, to show the importance of having accurate coastal topography in determining the variations of transports across the MBRS. The variations found in transports across the MBRS (on seasonal and mesoscale time scales) may have important consequences for biological activities along the reef such as spawning aggregations; better understanding the nature of these variations will help ongoing efforts in coral reef conservation and maintaining the health of the ecosystem in the region.     

Ground deformation of Nisyros Volcano (Greece) for the period 1995–2002: Results from DInSAR and DGPS observations

Differential GPS (DGPS) and Differential Interferometric Synthetic Aperture Radar (DInSAR) analyses were applied to the Kos-Yali-Nisyros Volcanic Field (SE Hellenic Volcanic Arc) to quantify the ground deformation of Nisyros Volcano. After intense seismic activity in 1996, a GPS network was installed in June 1997 and re-occupied annually up to 2002. A general uplift ranging from 14 to 140 mm was determined at all stations of the network. The corresponding horizontal displacements ranged from 13 to 53 mm. The displacement vectors indicate that the island is undergoing extension towards the East, West and South. A two-source “Mogi” model combined with assumed motion along the Mandraki Fault was constructed to fit the observed deformation. The best-fit model assumes sources at a depth of 5500 m NW of the centre of the island and at 6500 m offshore ESE of Yali Island. DInSAR analysis using four pairs of images taken between May 1995 and September 2000 suggests that deformation was occurring during 1995 before the start of the seismic crisis. An amplitude of at least 56 mm along the slant range appeared for the period 1996 through 1999. This deformation is consistent with the two-source model invoked in DGPS modelling. Surface evidence of ground deformation is expressed in the contemporaneous reactivation of the Mandraki Fault. In addition, a 600 m long N-S trending irregular rupture in the caldera floor was formed between 2001 and 2002. This rupture is interpreted as the release of surface stress in the consolidated epiclastic and hydrothermal sediments of the caldera floor.     

Radiative Feedbacks and Monsoon Circulations: A View from Simplified Models

The modulation of radiative processes by changes in water vapor and cloudiness is at the origin of important feedbacks which control climate variability as well as climate changes. These feedbacks are especially active in the intertropical area, where it is possible to diagnose a combination of partially compensating positive and negative feedbacks. The characteristics and the strength of those feedbacks is closely associated with the dynamical regimes in which they develop. Reverse changes in dynamical patterns may cause a modulation of the radiative processes. A first approach to these problems is to distinguish between two ascending and subsiding circulation patterns. This bimodality of the circulation is well established in the tropical area, and favors the use of simplified models as an appropriate tool to carry out a first-order quantification of these processes. In particular, this combination of radiative and dynamical feedbacks characterizes the development of the monsoons and their variability. Simple conceptual models can thus serve to characterize some of the factors which will affect the intraseasonal variations of the monsoon.     

Energetic Particles Observed in the CUSP Region During a Storm Recovery Phase

In this paper we report energetic ion behavior and its composition variations observed by the Cluster/RAPID instrument when the spacecraft was travelling in the high latitude magnetospheric boundary region on the day of the 31 March, 2001, strongest magnetic storm in the past 50 years. The Dst index reached −360 nT at about 09:00 UT. During its early recovery phase, large amounts of oxygen and helium ions were observed; the ratio of oxygen to hydrogen in the RAPID energy range reached as high as 250%, which suggests that the observed energetic particles might be of magnetospheric origin. The observations further show that enhanced energetic electron fluxes are confined in a very narrow region, while protons have occupied a larger region, and heavy ions have been observed in an even larger region. The flux of energetic electrons show a slight enhancement in a region where the magnetic field magnitude is around zero. These observed energetic ions could be quasi-trapped by the current sheet in the stagnation region of the cusp.     

Photosynthesis-transpiration coupling model at canopy scale in terrestrial ecosystem

At the hypothesis of big leaf, an ecosystem photosynthesis-transpiration coupling cycle model was established by the scaled SMPT-SB model from single leaf to canopy, and model parameterization methods were discussed. Through simulating the canopy light distribution, canopy internal conductance to CO2 can be scaled from single leaf to canopy by integrating to canopy using the relationship between single internal conductance and photosynthetic photon flux density. Using the data observed by eddy covariance method from the Changbai Mountains site of ChinaFLUX, the application of the model at the canopy scale was examined. Under no water stress, the simulated net ecosystem photosynthesis rate fitted with the observed data very well, the slope and R2 of the line regression equation of the observed and simulated values were 0.7977 and 0.8892, respectively (n = 752), and average absolute error was 3.78 μmol CO2 m-2s-1; the slope, R2 and average absolute error of transpiration rate were 0.7314, 0.4355 and 1.60mmol H2O m-2 s-1, respectively (n = 752). The relationship between canopy photosynthesis,transpiration and external environmental conditions was discussed by treating the canopy as a whole and neglecting the comprehensive feedback mechanism within canopy, and it was noted that the precipitation course affected the transpiration rate simulation badly. Compared to the models based on eco-physiological processes, the SMPT-SB model was simple and easy to be used. And it can be used as a basic carbon and water coupling model of soil-plant-atmosphere continuum.     

Studies on wind environment around high buildings in urban areas

High buildings or architectural complex in urban areas remarkably distort the urban surface wind fields. As the air flow approaches,local strong wind may appear around the buildings. The strong wind makes the pedestrians on sidewalks, entrances and terrace very uncomfortable and causes the pedestrian level wind environment problem. In this studies, hot-wire wind measurement, wind scouring in wind tunnel and numerical computation were carried out to evaluate the wind environment of tall buildings in the prevailing flow conditions in Beijing areas. The results obtained by three techniques were compared and mutually verified. The conclusions drawn from three approaches agree with each other. Also the advantages and limitations of each method were analyzed. It is suggested that the combination of different techniques may produce better assessment of wind environment around high buildings.     

Strain accumulation in sand due to cyclic loading: drained triaxial tests

Our aim is the prediction of the accumulation of strain and/or stress under cyclic loading with many (thousands to millions) cycles and relatively small amplitudes. A high-cycle constitutive model is used for this purpose. Its formulas are based on numerous cyclic tests. This paper describes drained tests with triaxial compression and uniaxial stress cycles. The influence of the strain amplitude, the average stress, the density, the cyclic preloading history and the grain size distribution on the direction and the intensity of strain accumulation is discussed.