台湾海峡冬、夏季氮通量的数值模拟研究

本文建立了一个气候态驱动的台湾海峡物理-生态耦合模型（ROMS-NPZD）。与遥感观测数据的比较表明,模型能够较好地模拟出冬、夏季台湾海峡主要的温度和叶绿素分布特征。模型揭示了夏季台湾海峡营养盐输运的东、西通道,与南海次表层水的入侵通道一致;冬季,海峡中的营养盐来源于闽浙沿岸水和通过澎湖水道入侵的南海次表层水。模拟结果表明:夏季,通过海峡流入东海的氮主要为有机氮;冬季,闽浙沿岸流为海峡和南海北部陆架提供了丰富的营养盐,不仅如此,南海次表层水进入海峡的营养盐通量与夏季相当。     

潮流界以下河段航道整治水位确定方法研究——以长江江阴以下河段为例

在总结分析现有整治水位确定方法的基础上,根据潮流界以下河段的水沙运动特性,本文提出一种基于输沙能力的航道整治水位确定方法。考虑上游来水、下游潮汐为独立事件,统计潮流界以下河段上游来水、下游潮汐不同等级组合出现的频率,采用数学模型计算相应组合下河段沿程的潮位、流速过程,以流速四次方代表水流的输沙能力,统计不同潮位等级对应的综合净输沙能力,确定最大综合净输沙能力对应的水位为(最优)航道整治水位。以长江下游白茆沙水道和福姜沙水道为例,计算了所在河段的航道整治水位,并探讨了起动流速对整治水位计算的影响和最高整治水位概念对工程的意义。     

渤海海峡跨海通道建设对城市经济联系的影响分析

渤海海峡跨海通道建设将极大改变环渤海乃至整个东部沿海的交通格局,势必对其目标城市大连、烟台带来直接的经济影响,同时也会对辽东半岛、山东半岛乃至东北、华北和华东不同尺度地区的经济联系产生深远影响。文章选取山东省17个和辽宁省14个地级市的地区的生产总值、城市人口以及城市间的最短时间距离等指标,测度渤海海峡跨海通道建成前后,对山东、辽宁两省区域城市经济联系的影响。研究表明:渤海海峡跨海通道建成后,对大连、烟台间的经济联系强度有显著提高,各城市经济联系度的平均增幅明显不同;同时,受距离衰减规律的影响,两省的城市分别以大连、烟台为中心,根据距离远近及城市自身发展程度分为4个层次,经济联系强度由内向外逐层次减弱;从整体上看,渤海通道的建设对带动两省城市之间的经济联系度都有大幅度提升。     

基于UDF的水平轴潮流能水轮机被动旋转水动力性能研究

针对水平轴潮流能水轮机被动旋转问题,基于Fluent 17.0,运用UDF(User Defined Function)控制滑移网格对网格进行动态调整,仿真研究水轮机在不同安放角下被动旋转的水动力特性。通过仿真分析,结果表明:潮流能水轮机随着叶片安放角度的增加,尖速比、输出功率、捕能系数都是先增大后减小,叶片安放角为6°时,叶轮前后速度差最大,对潮流能利用充分,且各项性能均达到最佳;通过分析叶片受力,叶尖叶素在安放角为2°时阻力最大,3°时升力最大,升阻比在6°时最大,此时叶尖叶素升阻比C_L/C_D=6.27、攻角α=3.06°。由仿真结果可知水平轴潮流能叶轮的自启动过程由5个阶段组成,即加速度增大的加速运动段—加速度减小的加速运动段—加速度反向增大的减速运动段—加速度反向减小的减速运动段—稳定运行段,这对潮流能水轮机的设计具有重要的指导意义。     

世越号起吊姿态敏感性分析与方案选择

韩国世越号打捞是世界上首次利用托底钢梁原状态整体起吊难船出水的工程。客滚难船装载的货物容易在沉没后发生移位,上层建筑长时间沉没海底后发生泥沙淤积导致难以准确估计整船的重量重心及浮力浮心的位置。利用水池模型试验和数值计算两种方法分别对大型浮吊船单臂架打捞法和双驳船抬吊打捞法进行了难船姿态受重心位置偏移的敏感性分析。水池模型试验中发现,用大型浮吊船单臂架打捞法,世越号的姿态受其重心位置偏移非常敏感,容易发生侧翻;而用双驳船抬吊打捞法,世越号的姿态受其重心位置的影响非常有限,难船和抬浮驳船都可以保持一个较好的姿态。对比水池模型试验的结果,由于难以计及托底钢梁的翘动和滑动现象,数值计算中得到的难船起吊姿态值偏小。双驳船抬吊打捞法被选为打捞世越号的施工方案,其对难船重心位置偏移不敏感的特性得到了现场实证。这个特点为世越号的成功打捞出水起到了关键作用。     

Development of the cyclic p–y curve for a single pile in sandy soil

Pile foundations that support transmission towers or offshore structures are dominantly subjected to cyclic lateral load induced by wind and waves. For a successful design, it is crucial to investigate the effect of cyclic lateral loads on the pile behavior that is loaded laterally. Although the p–y curve method is generally utilized to design the cyclic laterally loaded pile foundations, the effect of cyclic lateral loads on the pile has not been properly implemented with the p–y curve. This reflects a lack of consideration of the overall stiffness change in soil–pile interaction. To address this, a series of model pile tests were conducted in this study on a preinstalled aluminum flexible pile under various sandy soil conditions. The test results were used to investigate the effect of cyclic lateral loads on the p–y behavior. The cyclic p–y curve, which properly takes into account this effect, was developed as a hyperbolic function. Pseudo-static analysis was also conducted with the proposed cyclic p–y curve, which showed that it was able to properly simulate cyclic laterally loaded pile behavior in sandy soil.     

Numerical study of sand scour with a modified Eulerian model based on incipient motion theory

Application of the standard Eulerian model to simulations of sand scour results in unrealistic phenomena. Therefore, the present work develops a modified Eulerian model based on sand incipient motion theory. The modified model is applied for simulating a two-dimensional single vertical jet and a moving planar jet. The simulation results generally demonstrate fairly good agreement with published results of scour profiles and the velocity contours of the water and sand phases. In addition, equations to describe self-similar scour profiles for the moving planar jet cases are given. The results demonstrate that the modified model efficiently and accurately simulates the two-dimensional sand scour produced by jets, particularly for the moving jet cases.     

Scales of predator detection behavior and escape in Fissurella limbata: A field and laboratory assessment

The consumptive effects of predators are widely acknowledged, but predation can also impact prey populations through non‐consumptive effects (NCEs) such as costly antipredator behavioral responses. The magnitude of antipredator behavioral responses by prey is determined by an assessment of risk using sensory cues, which in turn is modulated by the environmental context. We studied the detection behavior and escape response of the keyhole limpet Fissurella limbata from the predatory sea star Heliaster helianthus. Through laboratory and field experimental trials, we quantified the distance and time of predator detection behavior by the prey, and measured their active escape responses when elicited. We found that predator detection by the limpet was chiefly mediated by distance, with experimental individuals capable of detecting predator presence effectively up to distances of at least 50 cm in the field and 70 cm under laboratory conditions. Our results indicate that this prey species is able to evaluate the proximity of its predator and use it as an indication of predation risk; therefore, predator–prey distance appears to be a primary predictor of the magnitude of the antipredator response. Given the tight relationship between predator distance and prey movement and the important role herbivores can play, particularly in this ecosystem, we expect that NCEs will cascade to the patterns of abundance and composition of rocky shore communities through changes in prey foraging behavior under risk.     

Material selection for the gas containment system of a compressed natural gas carrier fleet

In this work, the possible exploitation of fiber-reinforced composites in the context of maritime transportation of compressed natural gas (CNG) is investigated. In addition to a more conventional steel configuration, two different fiber materials, carbon and glass, are considered as construction materials for pressure vessels (PVs) to be stored on board ships, with thickness optimized by FEM analysis.The considered scenario is represented by the transportation of CNG from an offshore well to a terminal on shore. Fleets of ships carrying CNG in pressure vessels manufactured with the investigated materials are generated by means of a ship synthesis model (SSM) software and compared on the basis of technical and economical indicators.The choice of the construction material influences considerably the weight of the PVs, which represent a major item of total ship weight and reflects directly on the general transport performances in terms of resistance, seakeeping and reliability in the service. On the other hand, capital as well as operating expenditures are considerably affected by the choice. When exploring the design space, the ship synthesis model is able, at a preliminary stage of the design, to account for the various technical and economical aspects, their implications and relationships. Results are presented of computations carried out in a specific case, identified by the annual gas production and other characteristics of the well terminal and a cruising route for the ships. The comparison is carried out on the basis of the cost per transported unit of gas and of the percentage of success in the transportation process. The computations show that the choice of the PV material has a key influence on the results in terms of optimal number, dimensions and speed of the ships.     

Estimation of mean and extreme waves in the East China Seas

Accurately estimating the mean and extreme wave statistics and better understanding their directional and seasonal variations are of great importance in the planning and designing of ocean and coastal engineering works. Due to the lack of long-term wave measurement data, the analysis of extreme waves is often based on the numerical wave hind-casting results. In this study, the wave climate in the East China Seas (including the Bohai Sea, the Yellow Sea and the East China Sea) for the past 35 years (1979–2013) is hind-casted using a third generation wave model – WAMC4 (Cycle 4 version of WAM model). Two sets of reanalysis wind data from NCEP (National Centers for Environmental Prediction, USA) and ECMWF (European Centre for Medium-range Weather Forecasts) are used to drive the wave model to generate the long-term wave climate. The hind-casted waves are then analysed to study the mean and extreme wave statistics in the study area. The results show that the mean wave heights decrease from south to north and from sea to land in general. The extreme wave heights with return periods of 50 and 100 years in the summer and autumn seasons are significantly higher than those in the other two seasons, mainly due to the effect of typhoon events. The mean wave heights in the winter season have the highest values, mainly due to the effect of winter monsoon winds. The comparison of extreme wave statistics from both wind fields with the field measurements at several nearshore wave observation stations shows that the extreme waves generated by the ECMWF winds are better than those generated by the NCEP winds. The comparison also shows the extreme waves in deep waters are better reproduced than those in shallow waters, which is partly attributed to the limitations of the wave model used. The results presented in this paper provide useful insight into the wave climate in the area of the East China Seas, as well as the effect of wind data resolution on the simulation of long-term waves.