Comparison of Seismic Dispersion and Attenuation Models

The frequency-dependent attenuation of seismic waves causes decreased resolution of seismic images with depth, and the difference in transmission losses induces amplitude variations with offset. Transmission losses may occur due to friction or fluid movement, or may result from scattering in thin-layer. Whatever the physical mechanism, they can often be conveniently described using an empirical formulation wherein the elastic moduli and propagation velocity are complex functions of frequency.We have compiled and compared algebraically and numerically eight different models involving complex velocity: the Kolsky-Futterman model, the power-law model, Kjartansson's model, Müller's model, Azimi's second and third model, the Cole-Cole model, and the standard linear-solid model.For two different parameter sets, the attenuation and phase velocity are computed in the seismic frequency band, and the plane-wave propagation of a Ricker wavelet for the other models is compared with that for the Kolsky-Futterman model. The first parameter set consists of parameters for each of the models calculated from expressions given in the appendix. These expressions make the different models behave similarly to the KF model. The second parameter set consists of model parameters that are numerically adapted to the KF model.By selecting proper parameters, all models, except the standard linear-solid model, show behavior similar to that of the Kolsky-Futterman model. The SLS model behaves differently from the other models as the frequency goes to zero or infinity. Broadband measurement data is needed to select a specific model for a given seismic experiment.     

Study on the characteristics of rock failure strain and acoustic emission field for two parallelling faults with the same slip direction including asperities

Introduction Concerning about research on grouped-earthquake seismogenic and occurrence, at present it is only limited on the stage of the theoretical analysis and numerical model. For instance, ZHANG (1987) simulated the grouped-earthquake generation and physical mechanism making use of spring-block principle. Applying for non-linear dynamic model, referring to Chinese continental plate as object, LI, et al (1997) performed the numerical simulation on the seismogenic and occurring of group…     

钢筋砼摩擦耗能支撑框架结构的单元刚度和力学模型分析

为研究钢筋砼摩擦耗能支撑框架结构的动力反应性能 ,对其中的摩擦耗能器单元和框架杆单元的单元刚度和力学模型做了分析。钢筋砼摩擦耗能支撑单元由支撑杆单元和钢板—橡胶摩擦耗能器单元组成 ,支撑单元可取空间杆单元 ,摩擦耗能器单元为平面应力矩形单元。摩擦耗能器单元的剪切恢复力曲线为理想的弹塑性曲线 ,根据耗能器单元的力学模型 ,可确定其在每一时刻的刚度 ;框架结构空间杆单元的恢复力模型采用双线型模型 ,根据杆单元的力学模型 ,可确定其在每一时刻的刚度。并利用所编制的程序对十层单榀两跨空间普通框架和摩擦耗能支撑框架在地震作用下进行了弹塑性反应时程分析 ,结果表明耗能支撑框架的顶层最大位移明显小于普通框架     

Natural hydraulic cracking: numerical model and sensitivity study

Natural hydrofracturing caused by overpressure plays an important role in geopressure evolution and hydrocarbon migration in petroliferous basins. Its mechanism is quite well understood in the case of artificial hydraulic fracturing triggered by high-pressure fluid injection in a well. This is not so for natural hydraulic fracturing which is assumed to initiate as micro-cracks with large influence on the permeability of the medium. The mechanism of natural hydraulic cracking, triggered by increasing pore pressure during geological periods, is studied using a fracturing model coupled to the physical processes occurring during basin evolution. In this model, the hydraulic cracking threshold is assumed to lie between the classical failure limit and the beginning of dilatancy. Fluid pressure evolution is calculated iteratively in order to allow dynamic adjustment of permeability so that the fracturing limit is always preserved. The increase of permeability is interpreted on the basis of equivalent fractures. It is found that fracturing is very efficient to keep a stress level at the rock’s hydraulic cracking limit: a fracture permeability one order of magnitude larger than the intrinsic permeability of the rock would be enough. Observations reported from actual basins and model results strongly suggest that natural hydraulic cracking occurs continuously to keep the pressure at the fracturing limit under relaxed stress conditions.     

Models of passive margin inversion: implications for the Rhenohercynian fold-and-thrust belt, Belgium and Germany

Positive tectonic inversion is related to the transmission of compressional stresses along a décollement into the foreland of an orogenic zone. This stress and strain concentration in regions remote from the main orogenic front is commonly related to the presence of pre-existing rheological heterogeneities such as normal syn-depositional faults. During inversion, these pre-existing normal faults are reactivated as reverse faults. Tectonic inversion in the Rhenohercynian fold-and-thrust belt during the Variscan Orogeny shows that inversion is likely synchronous with the onset of collision in the hinterland. Here, we present the results of a simplified thermo-mechanical model (STM) which allows one to study strain partitioning between two orogenic zones. We show that, if the two orogenic zones have the same mechanical properties, the viscosity of the décollement, which links them, controls the initial strain partitioning. During subsequent finite shortening, erosional processes determine the partitioning of strain rate. The presence of a weak structure in the inverted zone and of a low-viscosity décollement leads to initial strain concentration in the inverted track rather than in the collision zone and a progressive decrease in strain partitioning between the two orogenic zones. The STM results are in good agreement with results of a 2D finite-element model. We conclude that, in the western part of the Rhenohercynian Massif, simultaneous uplift and deformation within the Mid-German Crystalline Rise (the main collision zone) and the Ardenne Anticlinorium (the inverted zone) lead to interpreting this orogenic event as a case of vice tectonic rather than the propagation of a ‘wave of folding’ towards the Variscan front, as suggested by previous authors.     

关于全球板块运动模型ITRF2000VEL若干问题探讨

利用最新的国际地球自转服务（IERS）发布的国际地球参考架ITRF2000速度场，建立了一个独立于任何其它模型、安全基于现代空间大地测量实测结果的现今全球板块运动模型ITRF2000VEL，较百万年平均地质模型NNR－NUVELIA更能真正反映全球板块现今运动特征，相比ITRF96,晚接近于百万年地质模型NNR－NUVELIA，而且ITRF2000参考架在定向、原点和尺度的定义较ITRF96和ITRF97参考架有了改进，但ITRF200VEL模型存在诸多问题：总角动量|L|=0.127，即不为零，与协议参考架（CTRF）不符，存在整体旋转，并建立无旋转NNR－ITRF2000VEL模型，台站不均匀分布全球板块、部分板块界线不明确以及有的板块不满足刚性特征等，这些对ITRF2000的高精度应用和长期维持、地球自转参数的长期变化都将产生一定的影响。     

基于DEM的分布式水文模型构建方法

基于 DEM的分布式水文模型是现代水文学同高科技 (如计算机技术、 3S技术等 )相结合的产物 ,是研究变化环境下水文循环与水资源演化规律的理想工具 ,代表了水文模型的最新发展方向。从 DEM的特性出发 ,本文探讨并总结了分布式水文模型的特点、建模思路和模型基本结构框图。在流域离散化方面 ,重点介绍了分布式水文模型常用的三种单元划分方法 ;最后 ,针对分布式水文模型构建问题 ,从“输入模块”、“单元水文模型”、“河网汇流模型”三方面 ,阐述了分布式水文模型微结构构建方法。     

湘桂黔滇藏红色岩溶风化壳发育模式

基于对湘，桂、黔，滇，藏等地岩溶区红色风化壳的野外和室内研究，从表生地貌学，粘土矿物学和地球化学角度分析红色石灰土性质与地貌演化的关系，提出红色岩溶风化壳发育的二阶段模式；1）地貌夷平-风化物质积累阶段，在地貌演化过程中溶蚀残余物质不断积累，最后在夷平面上形成厚层连续的泥质风化壳，夷平面的地貌水文条件有利于粘粒的形成和保存，但限制了富铝化作用的有效进行，造就了岩溶风化壳粘粒含量高，富铝化程度低的特点，这与研究区23个红色岩溶风化壳剖面化学，粒度特征和粘土矿物组合特点一致。2）地貌切割-风化壳淋溶阶段，原始夷平面上的风化壳大多呈灰色，只有在构造隆升和地表微切割导致地下水位降低，淋溶条件开始改善的情况下，风化壳才有可能枞根本上转为红色。     

张家界水环境演变与旅游发展关系

通过实地监测并全面分析张家界国家森林公园水环境演变趋势，发现金鞭溪水质下降最为明显，而且随着游客的逐年增多，呈现出加速恶化的趋势。金鞭溪水质恶化主要表现为蓝藻，绿藻迅速繁殖，感官质量下降，主要原因是上游接待区锣鼓塔排出的污水中总磷超标，通过建立基于环境脆弱因子的动态阈值模型，计算得出：在不超出张家界景区最为脆弱的环境因子－金鞭溪水质标准：总磷≤0．02前提下，金鞭溪上游接待区住宿设施生态阈值，春季临界床位数1186，夏季为3057，冬季为545，秋季为333。     

分布式侵蚀预报模型中网格面积的选定——以黄土高原丘陵沟壑区为例

在分布式土壤侵蚀过程模型中 ,承载数据以及进行运算的最小单元 ,即基本地块的选取是非常关键的 ,它直接关系到模型的模拟精度和运算数据量。目前大多数分布式模型都采用平均布设矩形网格的方法 ,这种方法在基本网格的大小选取上存在着盲目性和不统一性。本文以黄土高原丘陵沟壑区为例 ,利用GIS和SPSS分析了黄土高原丘陵沟壑区属性均一的基本地块在面积上的统计规律 ,给出了基本地块选取的合理依据 ,以促进建立更好的分布式模型