Parabolic Wave Propagation Modelling in Orthogonal Coordinate Systems

This paper presents a numerical model study of the propagation of water waves using the parabolic approximation of the mild-slope equation in the orthogonal coordinate system. Two types of coordinate systems are studied: (a) a general form of orthogonal coordinate system and (b) the conformal system, a special form of orthogonal coordinate system. Two typical examples, namely, expanded breakwaters and a circular channel, are studied to validate the model. First, the examples are studied by use of the general orthogonal coordinates. Then the same examples are computed by use of the confonnal system. The computational results show that the confonnal coordinate system generally gives better predictions than the general orthogonal system. A numerical technique for generating the conformal grid is combined with the numerical model to improve the practicability of the model. The comparison between the result from the numerical grid system and that from the analytical grid system shows that reliable computational results can be obtained by use of the numerical confonnal grid system.     

Undular tidal bore dynamics in the Daly Estuary, Northern Australia

Measurements in the macro-tidal Daly Estuary show that the presence of an undular tidal bore contributed negligibly to the dissipation of tidal energy. No recirculation bubble was observed between a trough and the following wave crest in the lee waves following the undular bore. This differs to stationary undular bores in laboratory experiments at larger Froude numbers where a recirculation bubble exists. Secondary motions and the turbulence generated by the undular bore had no measurable influence on the sediment transport. This situation contrasts with the intense sediment resuspension observed in breaking tidal bores. The tidally averaged sediment budget in the Daly Estuary was controlled by the asymmetry of tidal currents. The undular bore may widen the river by breaking along the banks that it undercuts, leading to bank slippage. A patch of river-wide macro-turbulence of 3-min duration occurred about 20 min after the passage of the bore during accelerating tidal currents.     

Application of a two-dimensional depth-averaged hydrodynamic tidal model

A two-dimensional hydrodynamic model application to the San Francisco Bay was performed using the Boundary-Fitted HYDROdynamic model (BFHYDRO). The model forcing functions consist of tidal elevations along the open boundary and fresh water flows from the Delta Outflow. The model-predicted surface elevations compare well with the observed surface elevations at five stations in San Francisco Bay. Mean error in the model predicted surface elevations and currents are less than 7 and 9%, respectively. Correlation coefficients for surface elevations and currents are higher than 0.94 and 0.95, respectively. The amplitudes and phases of the principal tidal constituents at 24 tidal stations in San Francisco Bay, obtained from a harmonic analysis of a 90-day simulation compare well with the observed data. The predicted amplitude and phase of the M₂ tidal constituent at these stations are respectively within 8 cm and 8° of the observed data. Maximum errors in the K₁ harmonic amplitudes and phases are less than 3 cm and 7° respectively. The asymmetric diurnal and semi-diurnal tidal ranges and spring and neap tidal cycles of the surface elevations and currents are well reproduced in the model at all stations.     

Field measurements and monitoring of wastewater discharge in sea water

This paper reports a study of the field measurements and monitoring of wastewater discharge in sea water at Bari East (Italy). A wastewater sea outfall system is an integral and fundamental part of each wastewater treatment with ultimate sink in the sea water. The design of a water treatment plant and wastewater outfall must take into account the use of the environmental water, the values of physicochemical parameters to be respected in order to safeguard the use itself and the quality of the environmental water where wastewater is issued. In the present study measurements of sea current velocity components were carried out with a VM-ADP (Vessel-Mounted Acoustic Doppler Profiler). Salinity, wind directions and velocities were assessed with, for one survey, the total faecal coliforms and other biochemical parameters. It was emphasized that the measurements necessary for monitoring cannot be concentrated in the wastewater outfall pipe zone only, but should be extended to a neighbouring area of the outfall pipe, with an extension depending on the wastewater discharge, the polluting charge and the magnitude of the sea currents and the winds typical of the zone of interest. The analyses presented in this paper confirm that the sea zones close to the wastewater outfall pipe are particularly sensitive and vulnerable. Such results must be considered in the planning of a wastewater outfall pipe.     

A Sensitivity Analysis of the Waterline Method of Constructing a Digital Elevation Model for Intertidal Areas in ERS SAR scene of Eastern England

A sensitivity analysis of the waterline method of constructing a Digital Elevation Model (DEM) of an intertidal zone using remote sensing and hydrodynamic modelling is described. Variation in vertical height accuracy as a function of beach slope is investigated using a set of nine ERS Synthetic Aperture Radar (SAR) images of the Humber/Wash area on the English east coast acquired between 1992 and 1994. Waterlines from these images are heighted using a hydrodynamic tide-surge model and interpolated using block kriging. On 1:500 slope beaches, an average block height estimation standard deviation of 18–22 cm is achieved. This rises to 27 cm on 1:100 slope beaches, and 32 cm on 1:30 slope beaches. The average heighting error at different slopes is decomposed into components due to waterline heighting error, inadequate sensor resolution and interpolation inaccuracy. It is shown that, at 1:500 slope, waterline heighting error and interpolation inaccuracy are the main error sources, whilst at 1:30 slope, errors due to inadequate sensor resolution become dominant. The ability of the technique to generate intertidal DEMs for almost the entire coastal zone in a complete ERS SAR scene covering 100×100 km is demonstrated.     

潜艇疲劳载荷的概率模型

探讨了建立潜艇疲劳载荷概率模型的方法，引入了正态分布和两参数威布尔分布两种概率模型。两参数威布尔分布较适合于用来描述潜艇下潜深度分布的概率特征。可根据潜艇的设计参数、任务及航行区域等因素来选取最可能的分布形式获得潜深分布密度函数。潜艇疲劳热点部位的应力(应变)幅值分布，可由应力(应变)和潜深的关系通过相应的变换得到。     

The intertidal erosion rate of cohesive sediment: a case study from Long Island Sound

Over the past decades, many attempts have been made to generate useful bottom erosion models for the study of cohesive sediment movement. This study addresses some of the key questions involved in determining the functional relationship between erosion rate and bottom shear stress. Current, wave, and turbidity data were collected from a bottom mounted instrument array in a moderately energetic estuarine environment. The bottom shear stress was calculated from a wave–current interaction model. The erosion rate was derived from the observed sediment concentration using a vertical mixing model. Examination of the relationship between erosion rate and bottom stress showed that the erosion rate varied at intertidal frequency. When averaged over the tidal fluctuation, the erosion rate remained approximately constant at low stress, but increased sharply when the shear stress rose above a critical value. This suggests two-stage erosion. The bed has a layered structure, in which a thin layer of loose, high water content material overlies a more consolidated bed. The top layer of high water content material (fluff) was easily disturbed and re-suspended by tidal currents, but the consolidated bottom layer was eroded only under conditions of high shear stress.     

Structural modeling and testing of a concrete canoe

A finite element model is set up and experimental tests are performed to help understand the behavior of a concrete canoe and subsequently optimize its design. First, the performance criteria that must be satisfied to participate at the annual ASCE/Master Builders competition are described. Then, the finite element model and the different loading cases that were studied are presented. Results from these loading cases are discussed and used to optimize the material properties as well as the thickness of the hull and the dimensions of the gunwale and reinforcing ribs. Static and dynamic experimental tests were also conducted to validate the results of the finite element analyses. The results indicate that the main stresses and strains are caused by the static load cases. The additional stresses caused during races are small.