The Glarus thrust: excursion guide and report of a field trip of the Swiss Tectonic Studies Group (Swiss Geological Society, 14.–16. 09. 2006)

This excursion guide results form a field trip to the Glarus nappe complex organized by the Swiss Tectonic Studies Group in 2006. The aim of the excursion was to discuss old and recent concepts related to the evolution of the Glarus thrust. The major aspects were (i) the interplay between deformation, fluid flow and geochemical alteration, (ii) episodic versus continuous deformation and fluid flow, and (iii) the link between large-scale structures, microstructures, and geochemical aspects. Despite 150 years of research in the Glarus nappe complex and the new results discussed during the excursion, there exist controversies that still are unsolved.     

北武夷地区逆冲推覆构造的特征及其控矿作用

北武夷地区成矿地质条件优越,矿产资源分布广泛,而广泛发育的推覆构造深刻影响着矿床的成生与保存。区域性推覆构造是成矿前、成矿期还是成矿后的构造,其精细结构特征如何,是否具有控岩控矿作用,如果是破矿作用,是否造成矿体重复增大或者隐伏、缺失等问题,严重影响着地质找矿的效果。建议开展面积性、追索性的路线地质调查,查明逆冲推覆构造的区域分布、不同单元的产状、构造样式,分别采用40Ar-39Ar和Re-Os定年技术测定推覆构造和矿体的形成时代,结合定量化分析及精细构造解析,研究构造与矿床的成生联系,预测隐伏矿体可能的位置,进而为北武夷地区寻找隐伏矿床和扩大矿床远景提供参考。     

山西大同口泉山隆升-挠褶构造研究

挠曲褶皱构造在山西广泛存在,大同市之西盆地边缘"口泉山断裂带"实际是一个大型挠褶构造带。以往的研究者仅把它当成几个断裂分段研究。认识和研究挠褶构造不仅能够在理论上取得进展,而且还能够指导煤矿勘探和开采,取得很好的经济效益。通过构造带上几个地方典型构造现象的研究得出,该构造带构造现象虽然复杂,但它并不是杂乱无章的,运用挠褶构造的理论上能够恢复它的原始形态以及它的发生发展的全过程。挠褶构造的形成与构造块体的隆升有关,其形成为:地幔柱隆升-地层上拱-挠褶-冲断走滑等。     

Effect of a submerged bay-mouth breakwater on tsunami behavior analyzed by 2D/3D hybrid model simulation

The hybrid numerical model had been developed to simulate a complicated 3D flow around structures generated by tsunami. In the model, the conventional 2D model is adopted for the wide region far from structures and the 3D non-hydrostatic pressure model is used in the limited region adjacent to structures. The applicability of the model is shown by comparisons of the numerical results with the experimental results of the laboratory model tests and the numerical analysis results of the conventional whole 2D simulation. In addition, the effect of a submerged structure at the opening of a breakwater is discussed from the numerical simulations by the hybrid model. The submerged structure improves the stability of the rubble mound and reduces the tsunami inflow into the bay, while it increases the water surface velocity around the opening of the breakwater. The increase of surface velocity causes the increases of impulsive forces by collision with drafts and so on.     

Monitoring of Over Cutting Area and Lubrication Distribution in a Large Slurry Pipe Jacking Operation

Slurry pipe jacking was firmly established as a special method for the non-disruptive construction of the underground pipelines of sewage systems. Pipe jacking, in its traditional form, has occasionally been used for short railways, roads, rivers, and other projects. Basically the system involves the pushing or thrusting of concrete pipes into the ground by a number of jacks. In slurry pipe jacking, during the pushing process, mud slurry and lubricant are injected into the face and the over cutting area that is between the concrete pipes and the surrounding soil. Next, the slurry fills voids and the soil stabilizes due to the created slurry cake around the pipes. Fillings also reduce the jacking force or thrust during operation. When the drivage and pushing processes are finished, a mortar injection into the over cutting area is carried out in order to maintain permanent stability of the surrounding soil and the over cutting area. Successful lubrication around the pipes is extremely important in a large diameter slurry pipe jacking operation. Control of lubrication and gaps between pipes and soil can prevent hazards such as surface settlement and increases in thrust. Also, to find voids around the pipes after the jacking process, in order to inject mortar for permanent stabilizing, an investigation around the pipes is necessary. To meet these aims, this paper is concerned with the utilization of known methods such as the GPR (Ground Penetrating Radar) system and borehole camera to maintain control of the over cutting area and lubricant distribution around the pipes during a site investigation. From this point of view, experiments were carried out during a tunnel construction using one of the largest cases of slurry pipe jacking in Fujisawa city, Japan. The advantages and disadvantages of each system were clarified during the tests.     

三峡库区滑坡治理工程设计中推力荷载计算方法初探

随着三峡水利工程的逐步实施，淹没区移民及新城镇建设等人类工程活动的加剧，以滑坡为主的环境地质问题日益突出。本文从稳定系数、安全系数入手，对铁道、公路等部门常用的设计计算原理进行了研究，并由此类比分析研究了三峡区回水后或库水位正常运行条件下，滑坡治理工程设计计算方法。     

多年冻土地区L型挡土墙土压力(冻胀力)的分析与试验

为适应多年冻土区土体冻胀过程所产生的较大变形的特性, 缩短施工进程, 减少扰动时间, 在青藏铁路格拉段选择了一个试验工点进行了L型悬臂挡墙的初步验证性试验研究. 通过对L型挡墙的受力模式分析, 确定了对粗颗粒填料不考虑冻胀力的土压力设计控制值. 通过与现场实测土压力分布规律的对比, 探讨了土压力与冻胀力的关系.     

塑性岩体与逆冲构造变形关系讨论——库车坳陷西部实例分析

在冲断构造分析过程中 ,常常把塑性岩体仅仅作为滑脱层看待 ,忽略了一些地区塑性变形与冲断构造变形的复合作用。根据露头、钻井、地震等资料 ,应用平衡剖面等技术对库车坳陷西部的构造变形进行了恢复分析 ,发现库车坳陷西部的下第三系盐、膏、泥等塑性体受重力和构造应力联合作用发生了复杂的变形。以往单纯用冲断构造模式分析其成因机制 ,没能科学地反映中生界与新生界之间的变形缩短量的差异 ,通过塑性体的底辟变形和滑脱变形依存关系的剖析 ,能够恢复库车坳陷西部构造演化过程 ,进而为油气勘探提供指导。     

农牧交错带典型区农业与牧业用地互动关系研究

利用1989年和2000年的两期Landsat-TM数据和相关的统计资料以及气候数据，应用转移距阵和多元回归分析等研究方法，对地处典型农牧交错带地区的兴和县土地利用变化进行研究，结果表明：农田和草地是研究区域中最主要的土地利用类型，Landsat-TM卫星影像数据和统计数据比较一致地反映农田和草地面积的变化；农田和草地的相互转换率在各种用地相互转化中非常剧烈；农业与牧业用地的互动特征具有明显的区域差异；农业和牧业用地的互动特点是自然因素和社会经济因素同时影响的结果。     

Topography as a major factor in the development of arcuate thrust belts: insights from sandbox experiments

We have used sandbox experiments to investigate and to illustrate the effects of topography upon the development of arcuate thrust belts. In experiments where a sand pack shortened and thickened in front of an advancing rectilinear piston, the geometry of the developing thrust wedge was highly sensitive to variations in surface topography. In the absence of erosion and sedimentation, the surface slope tended to become uniform, as predicted by the theory of critical taper. Under these conditions, the wedge propagated by sequential accretion of new thrust slices. In contrast, where erosion or sedimentation caused the topographic profile to become irregular, thrusts developed out of sequence. For example, erosion throughout a hinterland caused underlying thrusts to remain active and inhibited the development of new thrusts in the foreland. Where initial topography was irregular in plan view, accreting thrusts tended to be arcuate. They were convex towards the foreland, around an initially high area; concave towards the foreland, around an initially low area. Initial plateaux tended to behave rigidly, while arcuate thrust slices accreted to them. Thrust motions were radial with respect to each plateau. Within transfer zones to each side, fault blocks rotated about vertical axes and thrust motions were oblique-slip. At late stages of deformation, the surface slope of the thrust wedge tended towards a uniform value. Initial mountains of conical shape (representing volcanoes) also escaped deformation, except at depth, where they detached. Arcuate thrust slices accreted to front and back. Where a developing thrust wedge was subject to local incision, accreting thrust slices dipped towards surrounding areas of high topography, forming Vs across valleys.Arcuate structural patterns are to be found around the three highest plateaux on Earth (Tibet, Pamirs and Altiplano) and around the Tromen volcanic ridge in the Neuquén Basin of northern Patagonia. We infer that these areas behaved in quasi-rigid fashion, protected as they were by their high topography.