Experimental Study on Friction Coefficient Between Concrete and the Top Surface of Rubble Mound Foundation

Experimental studies on the friction coefficient between concrete and the top surface of a rubble mound foundation in China are reviewed. Through comparison of different test results, the development of this research is comprehensively analyzed. An experiment is carried out in the condition similar to prototype. The process curve of friction coefficient with the test block sliding is analyzed and a standard for determination of the friction coetfficient is defined. The variation features of the friction coefficient are analyzed on the basis of the present experimental results and other studies in China. It is shown that the friction coettfficient between concrete and the top surface of a rubble mound foundation decreases with the increase of the foundation pressure, and the friction coettqcient for a very fine leveling bed is smaller than that for a fine leveling bed.     

任意曲线曲面上重磁位场转换的B样条函数法

提出用B样条函数求解曲线、曲面上重磁位场的向上延拓,水平、垂向导数计算,磁异常分量互换的方法。该方法的特点是:原理简明,程序通用性强,计算精度高。     

A higher-order σ-coordinate non-hydrostatic model for nonlinear surface waves

A higher-order non-hydrostatic model in a σ-coordinate system is developed. The model uses an implicit finite difference scheme on a staggered grid to simultaneously solve the unsteady Navier-Stokes equations (NSE) with the free-surface boundary conditions. An integral method is applied to resolve the top-layer non-hydrostatic pressure, allowing for accurately resolving free-surface wave propagation. In contrast to the previous work, a higher-order spatial discretization is utilized to approximate the large horizontal pressure gradient due to steep surface waves or rapidly varying topographies. An efficient direct solver is developed to solve the resulting block hepta-diagonal matrix system. Accuracy of the new model is validated by linear and nonlinear standing waves and progressive waves. The model is then used to examine freak (extreme) waves. Features of downshifting focusing location and wave asymmetry characteristics are predicted on the temporal and spatial domains of a freak wave.     

Reduction of sand demand for shore protection

Beach nourishment is an environmentally preferred method of shore protection, but the annual sand requirement may lead to substantial maintenance costs. The shoreline processes, involving the surf zone, beach and dune, are reviewed with the aim of reducing the annual sand requirement of eroding shorelines. It is shown that surf zones with equilibrium profiles, on which the wave energy conversion is evenly distributed across the surf zone, from experience for given conditions indicate least loss of sand. On steep, eroding shorelines it may be difficult to establish an equilibrium profile. For such cases, the use of perched surf zones is recommended, which are supported at the seaward limit by an underwater sill. For reduction of littoral transport, the use of pervious pile groynes is recommended. These are arguably more efficient than impervious groynes. The sand loss from a usually dry beach by raised water levels is shown to be a function of the beach slope and is least when the storm waves at raised water levels do not cut an erosion escarpment. The loss of sand from a dune by infrequent severe storm tides can be prevented with the aid of a built-in membrane. These sand losses are usually large and constitute an uneconomic use of this sand resource. The proposed concepts and measures are linked to existing knowledge, augmented by data from the large wave flume (LWF) in Germany and field data from the North and Baltic Sea coasts.     

海州湾淤泥质海滩剖面堆积过程的计算模式

分别于1986年12月和1985年3月1日—1987年3月1日在海州湾进行了波浪和含沙量观测，运用所获资料以及本区长期水文、地形资料，采用流体力学、沉积学和泥沙运动力学相结合的研究方法，建立了海州湾淤泥质海滩剖面堆积过程的二维计算模式。结果表明，在堆积型淤泥质海滩，由于浮泥的经常性存在，使波浪急剧衰减，其对岸滩的作用甚为微弱，潮流成为塑造淤泥质海滩的主要动力，岸滩在淤涨过程中，在平均高潮位厂沿和平均低潮位附近出现两个凸点，上一个凸点外推速率大于下一个凸点，潮下带变化缓慢。     

Instrumentation and Numerical Analysis of Cylindrical Diaphragm Wall Movement During Deep Excavation at Coastal Area

The lateral deflection of a cylindrical diaphragm wall and the associated ground movement induced by deep excavation are analyzed by performing site instrumentations and numerical analyses in the coastal area of Korea. Wall lateral deflection, rebar stress, and pore water pressure were measured and analyzed in eight directions. Variations of soil properties with the decrease of confining pressure are compared by performing various in situ tests before ad after excavation. To calculate the wall lateral deflection accurately, the effects of small strain nonlinearity, confining pressure, and the hysteresis loading/unloading loop developed during excavation are considered in the proposed numerical analysis. By comparing numerical results with measured ones, the importances of considering small strain nonlinearity and confining pressure reduction in the nonlinear (FEM) are emphasized. Also, the effects of wall stiffness on the performance of cylindrical diaphragm walls are studied for future similar excavation in the coastal area.     

高精度CTD剖面仪研制过程中的专用设备

本文介绍了“油水分离压力罐”的主要理论依据及该设备采用的特殊的机械结构，实践证明，利用该设备实现了在实验室条件下，模拟深海重力场检测CTD剖面仪中的某些关键传感器的目的。     

旧路改建高速公路中地基强夯效应测试与工艺参数分析

旧路改建高速公路遇到的最主要的问题是地基的不均匀沉降。数值分析表明,对新的天然地基进行处理是解决这一问题的关键。强夯是加固地基的一种有效措施,为了对强夯工艺参数进行优化研究,对夯锤冲击地面过程中产生的动孔隙水压力、动土应力以及夯后超静孔隙水压力的消散过程进行了跟踪测试与分析。结果表明,对以风化料为主的地基,最大夯击数不宜超过4击,而且铺底夯完成2d后就可进行满夯。     

智能全站仪在大型压力容器焊接变形监测中的应用

在大型压力容器的部件焊接过程中,由于预热、焊接等工艺流程会导致各部件产生变形,从而引起部件之间的位置关系产生变化。为保证压力容器成品满足设计要求,必须在制造过程中实施变形监测,依据变形数据适当调整焊接工艺流程,控制变形量。提出采用智能全站仪配以自动变形监测软件对大型压力容器焊接变形进行实时监测,并应用于生产实践中,监测结果表明该方法自动化程度高、实时性好,能同时给出位置和姿态变形数据。     

山西临汾盆地黄土剖面重金属分布特征及其影响因素

山西临汾盆地2条黄土剖面重金属分布特征及其影响因素研究表明,Pb、Cu和Zn的垂向变化特征非常相似,而As、Cd和Hg在剖面中的分布特征与前三者不同。各重金属元素在黄土剖面中的变化特征首先均受到黄土源区物质成分的控制,其次不同程度地受到古气候变化的影响。依据Pb、Cu、Zn与各古气候替代性指标(例如磁化率,w(SiO2)/w(Al2O3)等)均呈显著相关,As、Cd和Hg与古气候替代性指标的相关性较差,推断剖面中Cu、Pb、Zn的分布特征受古气候变化的影响,其原因可能主要是这3个金属元素易以类质同象形式赋存在磁性矿物中;而As、Cd和Hg在剖面中的分布特征与古气候无关。但各重金属元素与源区指示元素的相关性表明其在剖面中的分布特征均受黄土源区物质成分的影响和控制。