上海市东方医院青岛分院钻孔桩施工技术

上海市东方医院（同济大学附属东方医院）青岛分院桩基工程,工程量大,工期紧,因上部存在填土、淤泥质土,地层条件较复杂。根据工程实际情况采用了旋挖钻机、冲击钻机、回转钻机成孔工艺,采取加长钢护筒、泥浆护壁等技术措施,有效解决了缩径、孔壁坍塌问题,保质保量按期完成了施工任务,取得了很好的经济和社会效益。     

泥浆护壁成孔灌注桩后注浆技术正确应用研究

为保证泥浆护壁成孔灌注桩后注浆技术正确应用,首先分析了后注浆技术对泥浆护壁灌注桩的作用机理以及天津地区的应用现状,然后通过对影响其应用效果的多种因素,如从业人员资格、成孔成桩质量、注浆阀、注浆泵、注浆相关参数等分析研究,提出相应的措施或建议。     

微生物-CMC无固相钻井液固壁作用与机理初探

松散破碎性地层孔壁失稳一直是困扰钻探工程界的难题之一,增强该类地层的胶结性,提高其力学性能是有效解决孔壁失稳的技术关键。本文将微生物诱导碳酸钙沉积（MICP）技术与CMC无固相钻井液相结合,构建微生物-CMC无固相钻井液体系。通过岩心浸泡实验、X射线衍射实验（XRD）以及扫描电镜分析两种微观分析手段对微生物-CMC无固相钻井液的固壁作用与机理进行了初探。结果表明：微生物-CMC无固相钻井液对松散破碎性地层具有较明显的加固作用,且作用时间越长,初始菌种浓度越高,钙源浓度越大,固壁效果越好。在固壁过程中,微生物随钻井液渗透进入试样内部,在松散颗粒之间诱导生成碳酸钙晶体,填充孔隙空间,将松散颗粒胶结成整体,并具有一定的力学强度,从而达到加固孔壁的目的。本研究结果为解决松散破碎性地层孔壁失稳提供了新的钻井液技术方案。     

Slope stability FEM analysis and retaining wall design: a case study of clinker in Benxi of Liaoning

Stability is always the most important problem after high slope was excavated. The study analyzed the stress and strain inside the slope by Finite Element Method (FEM) and carried through stress distribution and failure zone, then analyzed the stability of the slope using three different methods and came to the conclusion that it is in unstable condition, so the designed retaining wall was put forward which makes the slope stable.     

Direct numerical simulation of flow over a slotted cylinder at low Reynolds number

Direct numerical simulation was conducted to investigate the flow past a slotted cylinder at low Reynolds number (Re) of 100. The slotting of cylinder affects the boundary layer separation, vortex formation position, recirculation region length and wake width, which are determined by the type of slit. The streamwise slit (SS1), T-shaped slit (SS3) and Y-shaped slit (SS4) act as passive jets, while the transverse slit (SS2) achieves an alternate self-organized boundary layer suction and blowing. The flow rate in slits fluctuates over time due to the alternate vortex shedding and fluctuating pressure distribution around the cylinder surface. One fluctuation cycle of flow rate is caused by a pair of vortices shedding for SS2, SS3 and SS4, while it is created by each vortex shedding for SS1. The wall shear stress and flow impact on the slit wall partly contribute to the hydrodynamic forces acting on the slotted cylinder. Taking into account the internal wall of slit, the transverse slit plays the best role in suppressing the fluid forces with drag reduction of 1.7% and lift reduction of 17%.     

Semi-analytical solution for the water wave diffraction by arrays of truncated circular cylinders in front of a vertical wall

The present study investigates the combined wave field that is induced by the continuous interaction of plane waves with an array of truncated circular cylinders in front of a rigid wall. The long-term goal of the study is the investigation of possible increase in the efficiency of cylindrical Wave Energy Converters (WECs) by putting in the vicinity of the array a barrier to propagation, a wall, that could assist the reflection of the incoming waves. The main task is to develop a generic solution method that is free of conceptual simplifications employed, e.g. by the method of images and the assumption of “pure” wave reflection. To cope with the set task, the proposed method relies on the semi-analytical formulation of the velocity potentials, while the solution is sought by combined expressions that involve polar and elliptical harmonics. The wall is represented as an elliptical cylinder with zero semi-minor axis. This assumption has eventually a beneficial effect to the underlying formulation given that it simplifies significantly the expansions of the involved diffraction potentials.     

Hydrodynamic forces on a partially submerged cylinder at high Reynolds number in a steady flow

The hydrodynamic forces on the stationary partially submerged cylinder are investigated through towing test with Reynolds number ranging from 5 × 10⁴ to 9 × 10⁵. Three test groups of partially submerged cylinders with submerged depths of 0.25 D, 0.50 D, and 0.75 D and one validation group of fully submerged cylinders are conducted. During the experiments, the hydrodynamic forces on the cylinders are measured using force sensors. The test results show a considerable difference in the hydrodynamic coefficients for the partially submerged cylinders versus the fully submerged cylinders. A significant mean downward lift force is first observed for the partially submerged cylinders in a steady flow. The maximum of the mean lift coefficients can reach 1.5. Two distinct features are observed due to the effects of overtopping: random distributions in the mean drag coefficients and a clear quadratic relationship between the mean lift coefficients and the Froude number appear in the non-overtopping region. However, the novel phenomenon of a good linear relationship with the Froude number for the mean hydrodynamic coefficients is clearly shown in the overtopping region. In addition, fluctuating hydrodynamic coefficients are further proposed and investigated. These results are helpful to have a better understanding of the problem and to improve related structural designs.     

基于3DEC特厚水平煤层开采地表裂缝分布规律研究

针对我国中西部某矿区的特厚水平煤层综放开采导致的沉降变形、地表裂缝等问题,本文在总结该矿区各工作面地质采矿条件的基础上,结合以往沉陷预计中岩层岩块物理力学参数的选取原则,以摩尔-库伦塑性模型作为计算模型,采用离散元3DEC数值模拟的方法,分析了煤层开采后的地表下沉和水平变形情况。同时,本文结合实地采集的裂缝和塌陷区数据,对开采后上覆岩层垮落情况及裂缝发育情况进行研究,总结出该煤矿水平特厚煤层开采后地表裂缝的分布规律和地表移动变形规律,对该煤矿的生产和开采具有指导意义。     

一种基于室内点云数据的建筑墙线提取

针对室内点云数据无结构化属性、数据间无连接、不承载语义信息且数据点密度高的特点,结合建筑物点云几何特征和室内导航需求,通过数据降维简化建筑几何特征提取的复杂性,提出一种基于室内点云数据提取建筑物墙线的方法.该方法首先通过向特定方向投影,利用点云密度直方图完成天花板面、地板面和房间墙面的初步分割;然后将房间墙面点云数据向...     

阻尼器连接填充墙在柔性框架结构中的应用研究

阻尼器连接填充墙采用黏滞阻尼器与主体框架结构连接,是一种新型填充墙与框架的柔性连接方式,能满足柔性框架结构的大变形需求.为使得阻尼器连接填充墙达到最优的力学性能,结构布置和构件力学参数的选择十分重要,采用有限元软件ABAQUS分别建立了柔性钢框架结构和阻尼器连接填充墙-框架结构的有限元模型,考察不同阻尼系数阻尼器连接填...