铼—锇同位素分析中样品的预处理

文章对近年来在Ｒｅ＿Ｏｓ同位素质谱分析中样品的预处理方法进行了介绍和总结评述，重点介绍了样品的分解和元素的分离纯化。引用主要文献１８篇。     

煤显微组分分离富集

单组分成烃热模拟实验已成为煤成烃研究的重要组成部分，煤显微组分分离是上述研究的重要前提。实验结果证明：单纯应用某一种方法效果往往不佳，而采用人工碎样→筛选法→浮选法（沉淀法）→高速离心法这一综合的显微组分分离方法，则可以获得高纯度的显微组分。     

Distribution and Migrations of two Cerithid Snails on a Sand Flat in Bermuda

Abstract. Two species of cerithid prosobranchs live on a sand flat in Bermuda. At low tide during day light Batillaria minima is found on the surface whereas Cerithium lutosum remains buried in the sediment. This correlates with much higher lethal and coma temperatures, as well as much greater resistance to desiccation, of the former species. However, at other diurnal or tidal stages the two species co-occur in the same layer of sand. Despite greater resistance to physical factors the population of B. minima seems to be declining since in 1980 juveniles of this species were rare on Tuckers Town Flat whereas the population of C. lutosum was thriving.     

藤壶胶组分的分离制备

研究ＳｅｐｈａｄｅｘＧ－２５，Ｇ－５０，Ｇ－１００，Ｇ－２００和Ｇ－２００（超细）等型号的葡聚糖凝胶系统，对溶解在１．０％ＳＤＳ－２Ｍｅ水溶液中的网纹藤壶Ｂａｌａｎｕｓｒｅｔｉｃｕｌａｔｕｓ固态胶蛋白组分的分离制备效果。结果表明，ＳｅｐｈａｄｅｘＧ－２００和Ｇ－２００（超细）两种葡聚糖凝胶层析柱（直径１．７ｃｍ，长３０ｃｍ），用０．０５ｍｏｌ·Ｌ－１Ｔｒｉｓ－ＨＣｌ－１％ＳＤＳ－２Ｍｅ溶液洗脱时，均可将改蛋白组分按其分子量的大小进行分离，且以后者的分高效果更好。     

地面高精度磁测成图工作中异常分离的重要性

以往提及异常分离只是简单滤波,分离出相对高频和相对低频的两种异常,或者使用高频分析局部异常,或者使用低频分析区域异常。在分析局部异常时,由于对异常规模的更多关注,分离出来的频率也是一种"相对的高频"——实际是中等频率。笔者从成图角度分析了异常分离的重要性,并引用了实际工作的资料,展示了异常分离对成图、信息提取的良好作用和效果。     

利用AutoPrep离子色谱技术实现复杂基体样品中重稀土元素的分离和制备

研究了AutoPrep自动前处理装置和离子色谱联用技术分析复杂基体样品中重稀土元素的分离和半制备的方法。选用两个双层四通阀和一个六通阀替代传统方法中的四个双层四通阀，选用一个GS50四元梯度泵实现对螯合浓缩柱不同条件的淋洗，将吸附或交换在螯合柱和浓缩柱上的碱金属、碱土金属、过渡金属、重金属和重稀土元素选择性地分段洗脱，并将基体消除后的样品在线进样到CS5A离子色谱交换柱中进行最终分离，过柱衍生后进入紫外一可见光检测器进行光度检测，并根据确定的保留时间段进行在线样品收集，完成制备工作。对基体简单且被测组分含量较高的样品，采用直接进样法测定4种重稀土元素（Tb、Y、T和Lu）的检测限（S／N=3）为8．3-21．0μg，线性相关系数均大于0.9992，分离度均大于4，以峰面积计算的方法精密度（RSD，n=9）小于3％，回收率为89.0％～110.8％；对复杂基体样品或被测组分含量较低的样品，采用基体消除在线浓缩处理，方法的检测限（S／N=3）为0．67～1．43Ⅲ／L，线性相关系数均大于0，9994，分离度均大于3，方法的精密度（RSD，n=9）小于3％，回收率为91．2％～106．0％。对简单基体和复杂基体两种样品的分离和制备方法均具备灵敏度高、选择性好、自动化程度高、节省时间等特点．用于岩石等实际样品的检测．结果满意。     

Characteristics analysis on high density spatial sampling seismic data

China＇s continental deposition basins are characterized by complex geological structures and various reservoir lithologies. Therefore, high precision exploration methods are needed. High density spatial sampling is a new technology to increase the accuracy of seismic exploration. We briefly discuss point source and receiver technology, analyze the high density spatial sampling in situ method, introduce the symmetric sampling principles presented by Gijs J. O. Vermeer, and discuss high density spatial sampling technology from the point of view of wave field continuity. We emphasize the analysis of the high density spatial sampling characteristics, including the high density first break advantages for investigation of near surface structure, improving static correction precision, the use of dense receiver spacing at short offsets to increase the effective coverage at shallow depth, and the accuracy of reflection imaging. Coherent noise is not aliased and the noise analysis precision and suppression increases as a result. High density spatial sampling enhances wave field continuity and the accuracy of various mathematical transforms, which benefits wave field separation. Finally, we point out that the difficult part of high density spatial sampling technology is the data processing. More research needs to be done on the methods of analyzing and processing huge amounts of seismic data.     

Aqueous volatiles in hydrothermal fluids from the Main Endeavour Field, northern Juan de Fuca Ridge: temporal variability following earthquake activity

The Main Endeavour Field, northern Juan de Fuca Ridge, experienced intense seismic activity in June 1999. Hydrothermal vent fluids were collected from sulfide structures in September 1999 and July 2000 and analyzed for the abundance of H₂, H₂S, CH₄, CO₂, NH₃, Mg and Cl to document temporal and spatial changes following the earthquakes. Dissolved concentrations of CO₂, H₂, and H₂S increased dramatically in the September 1999 samples relative to pre-earthquake abundances, and subsequently decreased during the following year. In contrast, dissolved NH₃ and CH₄ concentrations in 1999 and 2000 were similar to or less than pre-earthquake values. Aqueous Cl abundances showed large decreases immediately following the earthquakes followed by increases to near pre-earthquake values. The abundances of volatile species at the Main Endeavour Field were characterized by strong inverse correlations with chlorinity. Phase separation can account for 20-50% enrichments of CO₂, CH₄, and NH₃ in low-chlorinity fluids, while temperature- and pressure-dependent fluid-mineral equilibria at near-critical conditions are responsible for order of magnitude greater enrichments in dissolved H₂S and H₂. The systematic variation of dissolved gas concentrations with chlorinity likely reflects mixing of a low-chlorinity volatile-enriched vapor generated by supercritical phase separation with a cooler gas-poor hydrothermal fluid of seawater chlorinity. Decreased abundances of sediment-derived NH₃ and CH₄ in 1999 indicate an earthquake-induced change in subsurface hydrology. Elevated CO₂ abundances in vent fluids collected in September 1999 provide evidence that supports a magmatic origin for the earthquakes. Temperature-salinity relationships are consistent with intrusion of a shallow dike and suggest that the earthquakes were associated with movement of magma beneath the ridge crest. These data demonstrate the large and rapid response of chemical fluxes at mid-ocean ridges to magmatic activity and associated changes in subsurface temperature and pressure.