The rate of denudation of some British lowland landscapes

Developments in dating techniques applicable to the late Tertiary and Quaternary are giving us the ability to date past land surfaces. Where reasonable assumptions about the nature of such past surfaces and their partial preservation may be made, they can be reconstructed. This permits the contouring and measurement of the subsequent dissection, allowing not only calculation of the average rate of erosion over the elapsed time, but also information on the pattern of incision. Two examples where this has been attempted are present; both are dissected till surfaces in eastern England, one of Anglian and the other of Devensian age. The approach quantifies the disparity between the incision of valleys and the general denudational lowering of the surface which characterizes many landscapes. The technique is not only of academic interest, but potentially forms a useful line of approach to the assessment of the safety of the burying toxic wastes. © 1997 by John Wiley & Sons, Ltd.     

基于新型单相MICP技术改性黏性土力学特性的试验研究

微生物诱导碳酸钙沉积(MICP)是一种绿色低碳的新型土体改性技术.该技术当前主要适用于渗透性较好的砂土,普遍使用两相处理方法,即菌液和胶结液分开施用.然而,对于渗透性相对较差的黏性土,传统的两相处理方法难以适用.为此,引入新的单相胶结方法,即菌液和胶结液混合施用,通过调节溶液的初始pH值为细菌水解作用提供窗口期,避免微生物絮凝阻塞孔隙,使混合液均匀分布于土体一定深度范围内,从而达到显著提升胶结效果的目的.利用喷洒法将混合液喷洒至土体表层进行MICP处理,处理完成后使用超微型贯入仪SMP-1测试土体表层不同深度处的结构强度,分析土体力学特性的空间差异,对土体的胶结效果进行定量评价.此外,探究了胶结液浓度(0.2M、0.5M和1.0M)及胶结方法(调节pH与否)对于土体结构强度及MICP改性效果的影响.结果表明:采用单相MICP技术对黏性土进行改性,能够显著提高其结构强度,具有较好的适用性;在不高于1.0 M的胶结液浓度范围内,黏性土的胶结效果随着胶结液浓度增加而提升;相比较而言,调节pH的单相胶结方法对于提升土体胶结的深度和均匀性有明显积极作用.新型单相MICP技术简单易行,能够节约成本,在黏性土表层加固方面具有潜在推广应用价值.     

Gully erosion spatial modelling: Role of machine learning algorithms in selection of the best controlling factors and modelling process

This investigation assessed the efficacy of 10 widely used machine learning algorithms (MLA) comprising the least absolute shrinkage and selection operator (LASSO), generalized linear model (GLM), stepwise generalized linear model (SGLM), elastic net (ENET), partial least square (PLS), ridge regression, support vector machine (SVM), classification and regression trees (CART), bagged CART, and random forest (RF) for gully erosion susceptibility mapping (GESM) in Iran. The location of 462 previously existing gully erosion sites were mapped through widespread field investigations, of which 70% (323) and 30% (139) of observations were arbitrarily divided for algorithm calibration and validation. Twelve controlling factors for gully erosion, namely, soil texture, annual mean rainfall, digital elevation model (DEM), drainage density, slope, lithology, topographic wetness index (TWI), distance from rivers, aspect, distance from roads, plan curvature, and profile curvature were ranked in terms of their importance using each MLA. The MLA were compared using a training dataset for gully erosion and statistical measures such as RMSE (root mean square error), MAE (mean absolute error), and R-squared. Based on the comparisons among MLA, the RF algorithm exhibited the minimum RMSE and MAE and the maximum value of R-squared, and was therefore selected as the best model. The variable importance evaluation using the RF model revealed that distance from rivers had the highest significance in influencing the occurrence of gully erosion whereas plan curvature had the least importance. According to the GESM generated using RF, most of the study area is predicted to have a low (53.72%) or moderate (29.65%) susceptibility to gully erosion, whereas only a small area is identified to have a high (12.56%) or very high (4.07%) susceptibility. The outcome generated by RF model is validated using the ROC (Receiver Operating Characteristics) curve approach, which returned an area under the curve (AUC) of 0.985, proving the excellent forecasting ability of the model. The GESM prepared using the RF algorithm can aid decision-makers in targeting remedial actions for minimizing the damage caused by gully erosion.     

The impact of storm-triggered landslides on sediment dynamics and catchment-wide denudation rates in the southern Central Range of Taiwan following the extreme rainfall event of Typhoon Morakot

Extreme erosion events can produce large short-term sediment fluxes. Such events complicate erosion rates estimated from cosmogenic nuclide concentrations in river sediment by providing sediment with a concentration different from the long-term basin average. We present a detrital ¹⁰Be study in southern Taiwan, with multiple samples obtained in a time sequence bracketing the 2009 Typhoon Morakot, to assess the impact of landslide sediment on ¹⁰Be concentrations (N¹⁰Be) in river sediment. Sediment samples were collected from 13 major basins, two or three times over the last decade, to observe the temporal variation of N¹⁰Be. Landslide inventories with time intervals of 5–6 years were used to quantify sediment flux changes. A negative correlation between N¹⁰Be and landslide areal density indicates dilution of N¹⁰Be by landslide sediment. Denudation rates estimated from the diluted N¹⁰Be can be up to three times higher than the lowest rate derived from the same basins. Observed increases imply that, 3 years after the passage of Typhoon Morakot, fluvial channels still contain a considerable amount of sediment provided by hillslope landslides during the event. However, higher N¹⁰Be in 2016 samples indicate that the contribution from landslide sediment at the sampled grain size has decreased with time. The correlation between changes in N¹⁰Be and landslide area and volume is not strong, likely resulting from the stochastic and complex nature of sediment transport. To simultaneously evaluate the volume of landslide-derived sediment and estimate the background denudation rate, associated with less impulsive sediment supply, we constructed a sediment-mixing model with the time series of N¹⁰Be and landslide inventories. The spatial pattern of background erosion rate in southern Taiwan is consistent with the regional tectonic framework, indicating that the landscape is evolving mainly in response to the tectonic forcing, and this signal is modified, but not obscured by impulsive sediment supply. © 2019 John Wiley & Sons, Ltd.     

Controls on debris-flow initiation on burned and unburned hillslopes during an exceptional rainstorm in southern New Mexico,USA

AbstractUsing observations from 688 debris flows, we analyse the hydrologic and landscape characteristics that influenced debris-flow initiation mechanisms and locations in a watershed that had been partially burned by the 2012 Whitewater-Baldy Complex Fire in the Gila Mountains, southern New Mexico. Debris flows can initiate due to different processes. Slopes can fail as discrete landslides and then become fluidized and move downstream as debris flows (landslide initiated) or progressive bulking of sediment from a distributed area can become channelized and concentrated as it moves downslope (runoff generated). In this study, we have an unusual opportunity to investigate both types of debris-flow initiation mechanisms in our observations of debris flows, triggered by an exceptional rainstorm in the autumn of 2013. Additionally, we compare our observations with those of a dataset of 1138 debris flows in the Colorado Front Range, triggered during the same weather system. We found that runoff-generated debris flows dominated in burn areas, and runoff required to start these flows could be well characterized by the Shields stress. Landslide-initiated debris flows were dominant in unburned areas. Debris-flow densities were tied to total rainfall and precipitation intensities. Like the observations in the Colorado Front Range, debris-flow initiation locations were found primarily in areas of relatively sparse vegetation on south-facing slopes between 25 and 40°, and with upslope contributing areas less than 1000 m². In terms of preferential locations for debris-flow initiations, 2013 vegetation coverage, approximated by Green–Red Vegetation Index metrics, proved to be more influential than the 2012 burn-severity designation. The uniformity of observations between our study area and those in the Colorado Front Range indicate that the underlying hydrologic and landscape patterns of the debris-flow initiation locations documented in these studies could be applicable to the wider southwest and Rocky Mountain regions. © 2019 John Wiley & Sons, Ltd.     

Deglaciation history at the Alpine-Mediterranean transition (Argentera-Mercantour,SW Alps) from 10Be dating of moraines and glacially polished bedrock

Estimating the extent and age of the last glacial maxima as well as the chronology of glacial recessions in various environmental contexts is key to source-to-sink studies and paleoclimate reconstructions. The Argentera-Mercantour massif is located at the transition between the Alps and the Mediterranean Sea, therefore, its deglaciation chronology can be compared to the sediment budget of the Var River basin. Based on 13 new cosmic-ray exposure (CRE) beryllium-10 (¹⁰Be) datings performed on moraines and polished crystalline bedrocks and 22 reassessed ¹⁰Be CRE ages from similar altitude nearby steep basement surfaces, and from a lake sediment core, we can constrain the deglaciation chronology of the Argentera-Mercantour massif. These data allow for the first time to fully reconstruct the deglaciation history at the scale of the entire massif in agreement with a major glacier recession at c. 15 ka, at the onset of Bølling transition between the Oldest and Older Dryas. Main deglaciation of the upper slopes [2700–2800 m above sea level (a.s.l.)] occurred after the Last Glacial Maximum (LGM) at 20.8–18.6 ka, followed by the main deglaciation of the lower slopes (2300 m a.s.l.) at 15.3–14.2 ka. Finally, the flat polished surfaces above 2600 m a.s.l. and the zones confined within narrow lateral valleys were likely affected by progressive ice melting of remaining debris covered glaciers and moraine erosion following the Younger Dryas re-advance stage between 12 and 8–9 ka. At lower elevations, the Vens Lake located at 2300 m a.s.l., allows evidence of the onset of lake sedimentation at c. 14 ka and a transition towards a vegetated environment that mainly occurred before 8 ka. Moraine final stabilization at 5 ka might reflect denudation acceleration during the Holocene humid phase. This contribution reveals a glacier–climate relationship more sensitive to warming phases in the southern Alps highlighted by a major decrease of glaciers after c. 15 ka. This major deglaciation is correlated with a 2.5-fold decrease of sediment discharge of rivers into the Mediterranean Sea. © 2019 John Wiley & Sons, Ltd.     

Evaluating functional connectivity in a small agricultural catchment under contrasting flood events by using UAV

Concentrated erosion, a major feature of land degradation, represents a serious problem for soil and water resources management and a threat to ecosystems. Understanding the internal mechanisms (de-)coupling sediment pathways can improve the management and resilience of catchments. In this study, concentrated erosion and deposition forms were mapped accurately through field and aerial unmanned aerial vehicle (UAV) campaigns, in order to assess the evolution of connectivity pathways over a series of three contrasted and consecutive flood events occurring between October 2016 and January 2017 (return period ranging from 0.5 to 25 years) in a small Mediterranean agricultural catchment (Can Revull, Mallorca, Spain; 1.4 km²). In addition, a morphometric index of connectivity (IC) was used to identify the potential trajectories of different concentrated erosion forms and deposition areas. IC predictions were calibrated by identifying the optimal critical thresholds, i.e. those most consistent with field observations after each of the events studied. The results found that the index performed well in predicting the occurrence and the length/area of the different type of landforms, giving kappa (κ) coefficients of variation ranging between 0.21 and 0.92 and linear correlations R² between 0.33 and 0.72. The type of landform affected the correspondence of IC predictions and field observations, with lower thresholds the greater the magnitude of their associated geomorphic processes. Rainfall magnitude proved to be a very important factor controlling the development of erosion and deposition landforms, with large differences in length/area between the contrasted events. The evolution of the observed trajectories revealed feedback dynamics between the structural and functional connectivity of the catchment, in which morphological changes determined the spatial distribution of the processes’ activity in the successive events and vice versa. © 2020 John Wiley & Sons, Ltd.     

Relating the depth of the water table to the depth of weathering

Weathering of bedrock creates and occludes permeability, affecting subsurface water flow. Often, weathering intensifies above the water table. On the contrary, weathering can also commence below the water table. To explore relationships between weathering and the water table, a simplified weathering model for an eroding hillslope was formulated that takes into account both saturated and unsaturated subsurface water flow (but does not fully account for changes in dissolved gas chemistry). The phreatic line was calculated using solutions to mathematical treatments for both zones. In the model, the infiltration rate at the hill surface sets both the original and the eventual steady-state position of the water table with respect to the weathering reaction front. Depending on parameters, the weathering front can locate either above or below the water table at steady state. Erosion also affects the water table position by changing porosity and permeability even when other hydrological conditions (e.g. hydraulic conductivity of parent material, infiltration rate at the surface) do not change. The total porosity in a hill (water storage capacity) was found to increase with infiltration rate (all else held constant). This effect was diminished by increasing the erosion rate. We also show examples of how the infiltration rate affects the position of the water table and how infiltration rate affects weathering advance. Published 2020. This article is a U.S. Government work and is in the public domain in the USA     

Bedrock erosion due to hoeing as tillage technique in a hilly agricultural landscape,southwest China

Tillage on hillslopes may not only induce severe soil erosion, but may also cause bedrock erosion under certain conditions. Yet, little is known about bedrock erosion by tillage in a hilly agricultural landscape, southwest China. The aim of this study is to quantify the translocation of rock fragments derived from bedrock fragmentation by hoeing under different conditions, including slope gradient, hoeing depth and soil-covered thickness using a gravel tracing method. The reliability of the gravel tracing method was confirmed by the bedrock dyeing tracing method. Hoeing depth is a significant factor affecting the translocation rate of rock fragments (Q_r ). Meanwhile, under the condition of overlying soil layers (0.06−0.10 m thick), the values of Q_r were significantly smaller with a reduction of 20.7−25.6%, compared with rock fragmentation by hoeing for bare bedrock. However, slope gradient was found to have insignificant effects on Q_r . Fractured bedrock moved as individual small fragments, which was mainly controlled by the hitting force of the hoe, while soil moved in the shape of lumps, which was dominated by both drag force of the hoe and gravity. This study suggests that hoeing into soil-covered bedrock can diminish bedrock erosion while providing soil matrix for shallow soil layers. Our work presents a quantitative assessment of bedrock erosion by hoeing and an underlying insight into characteristics of bedrock erosion by tillage operations in hilly agricultural regions with mudstone and shale, southwest China. © 2020 John Wiley & Sons, Ltd.