The influence of geomorphological position and vegetation cover on the erosional and hydrological processes on a Mediterranean hillslope

Soil erosion and runoff rates are assumed to be highly dependent on slope position. However, little knowledge exists about the hydrogeomorphological processes at the pedon scale that support this idea. In order to assess the hydrological and erosional behaviour of soils at different slope positions, simulated rainfall experiments (55 mm was applied during one hour) were carried out on a south-facing slope with underlying limestone in south-east Spain. In the mean terms, the erosion rates (9 g m² hr⁻¹) and the runoff coefficients (12%) were very low at the scale of measurement (0·25 m²). The slope position does not affect erosion rates when the measurements are carried out under extreme dry conditions during summer. The low runoff rates found in summer under thunderstorms of high intensity (5 year return period) and the runon into surfaces with higher infiltration rates resulted in no detectable direct surface runoff (Hortonian) at the slope scale. This implies that erosion as a consequence of surface overland flow will only take place during events of high magnitude (55 mm hr⁻¹) and low frequency (>5 years). Vegetation is the most important factor determining the soil erosion and runoff rates within the slope. © 1998 John Wiley & Sons, Ltd.     

Soil erosion modelled with USLE and PESERA using QuickBird derived vegetation parameters in an alpine catchment

The focus of soil erosion research in the Alps has been in two categories: (i) on-site measurements, which are rather small scale point measurements on selected plots often constrained to irrigation experiments or (ii) off-site quantification of sediment delivery at the outlet of the catchment. Results of both categories pointed towards the importance of an intact vegetation cover to prevent soil loss. With the recent availability of high-resolution satellites such as IKONOS and QuickBird options for detecting and monitoring vegetation parameters in heterogeneous terrain have increased. The aim of this study is to evaluate the usefulness of QuickBird derived vegetation parameters in soil erosion models for alpine sites by comparison to Cesium-137 (Cs-137) derived soil erosion estimates. The study site (67 km²) is located in the Central Swiss Alps (Urseren Valley) and is characterised by scarce forest cover and strong anthropogenic influences due to grassland farming for centuries. A fractional vegetation cover (FVC) map for grassland and detailed land-cover maps are available from linear spectral unmixing and supervised classification of QuickBird imagery. The maps were introduced to the Pan-European Soil Erosion Risk Assessment (PESERA) model as well as to the Universal Soil Loss Equation (USLE). Regarding the latter model, the FVC was indirectly incorporated by adapting the C factor. Both models show an increase in absolute soil erosion values when FVC is considered. In contrast to USLE and the Cs-137 soil erosion rates, PESERA estimates are low. For the USLE model also the spatial patterns improved and showed “hotspots” of high erosion of up to 16 t ha⁻¹ a⁻¹. In conclusion field measurements of Cs-137 confirmed the improvement of soil erosion estimates using the satellite-derived vegetation data.     

基于新型单相MICP技术改性黏性土力学特性的试验研究

微生物诱导碳酸钙沉积(MICP)是一种绿色低碳的新型土体改性技术.该技术当前主要适用于渗透性较好的砂土,普遍使用两相处理方法,即菌液和胶结液分开施用.然而,对于渗透性相对较差的黏性土,传统的两相处理方法难以适用.为此,引入新的单相胶结方法,即菌液和胶结液混合施用,通过调节溶液的初始pH值为细菌水解作用提供窗口期,避免微生物絮凝阻塞孔隙,使混合液均匀分布于土体一定深度范围内,从而达到显著提升胶结效果的目的.利用喷洒法将混合液喷洒至土体表层进行MICP处理,处理完成后使用超微型贯入仪SMP-1测试土体表层不同深度处的结构强度,分析土体力学特性的空间差异,对土体的胶结效果进行定量评价.此外,探究了胶结液浓度(0.2M、0.5M和1.0M)及胶结方法(调节pH与否)对于土体结构强度及MICP改性效果的影响.结果表明:采用单相MICP技术对黏性土进行改性,能够显著提高其结构强度,具有较好的适用性;在不高于1.0 M的胶结液浓度范围内,黏性土的胶结效果随着胶结液浓度增加而提升;相比较而言,调节pH的单相胶结方法对于提升土体胶结的深度和均匀性有明显积极作用.新型单相MICP技术简单易行,能够节约成本,在黏性土表层加固方面具有潜在推广应用价值.     

Gully erosion spatial modelling: Role of machine learning algorithms in selection of the best controlling factors and modelling process

This investigation assessed the efficacy of 10 widely used machine learning algorithms (MLA) comprising the least absolute shrinkage and selection operator (LASSO), generalized linear model (GLM), stepwise generalized linear model (SGLM), elastic net (ENET), partial least square (PLS), ridge regression, support vector machine (SVM), classification and regression trees (CART), bagged CART, and random forest (RF) for gully erosion susceptibility mapping (GESM) in Iran. The location of 462 previously existing gully erosion sites were mapped through widespread field investigations, of which 70% (323) and 30% (139) of observations were arbitrarily divided for algorithm calibration and validation. Twelve controlling factors for gully erosion, namely, soil texture, annual mean rainfall, digital elevation model (DEM), drainage density, slope, lithology, topographic wetness index (TWI), distance from rivers, aspect, distance from roads, plan curvature, and profile curvature were ranked in terms of their importance using each MLA. The MLA were compared using a training dataset for gully erosion and statistical measures such as RMSE (root mean square error), MAE (mean absolute error), and R-squared. Based on the comparisons among MLA, the RF algorithm exhibited the minimum RMSE and MAE and the maximum value of R-squared, and was therefore selected as the best model. The variable importance evaluation using the RF model revealed that distance from rivers had the highest significance in influencing the occurrence of gully erosion whereas plan curvature had the least importance. According to the GESM generated using RF, most of the study area is predicted to have a low (53.72%) or moderate (29.65%) susceptibility to gully erosion, whereas only a small area is identified to have a high (12.56%) or very high (4.07%) susceptibility. The outcome generated by RF model is validated using the ROC (Receiver Operating Characteristics) curve approach, which returned an area under the curve (AUC) of 0.985, proving the excellent forecasting ability of the model. The GESM prepared using the RF algorithm can aid decision-makers in targeting remedial actions for minimizing the damage caused by gully erosion.     

The effect of wildfire on runoff and erosion in native Eucalyptus forest

Wildfires raise concerns over the risk of accelerated erosion as a result of increased overland flow and decreased protection of the soil by litter and ground vegetation cover. We investigated these issues following the 1994 fires that burnt large areas of native Eucalyptus forest surrounding Sydney, Australia. A review of previous studies identifies the fire and rainfall conditions that are likely to lead to increased runoff and accelerated erosion. We then compare runoff and erosion between burnt and unburnt sites for 10 months after the 1994 fires. At the scale of hillslope plots, the 1994 fire increased runoff by enhancing soil hydrophobicity, and greatly increased sediment transport, mainly through the reduced ground cover, which lowered substantially the threshold for initial sediment movement. However, both runoff and sediment transport were very localized, resulting in little runoff or sediment yield after the fire at the hillslope catchment scale. We identify that after moderately intense fires, rainfall events of greater than one year recurrence interval are required to generate substantial runoff and sediment yield. Such events did not occur during the monitoring period. Past work shows that mild burns have little effect on erosion, and it is only after the most extreme fires that erosion is produced from small, frequent storms. © 1998 John Wiley & Sons, Ltd.     

Coupled wellbore erosion and stability analysis

This paper extends earlier work on sand erosion and presents an attempt to couple sand erosion to mechanical damage of rock around a wellbore. Porosity which evolves in time and space as surface erosion progresses, is chosen as the coupling parameter. Both rock elasticity and strength (cohesion) are assumed to depend on porosity in such a way that the material becomes weaker with increasing porosity. The mathematical model, consists of erosion equations, mixture flow equations and stress equilibrium equations, is solved numerically by Galerkin finite element method. Numerical results suggest that erosion, resulting in sand production, is high close to the free surface. Erosion is accompained by changes in porosity and a significant permeability increase. Erosion in the vicinity of the wellbore induces alterations in the mechanical behaviour of the medium. Weakening of rock stiffness leads to severe alteration of both effective stresses and pore pressure near the cavity. Since cohesion decreases with increasing porosity, one can also identify the time instant at which rock mechanical failure starts. © 1998 John Wiley & Sons, Ltd.     

New technologies and systems for high quality citrus fruit production,labor-saving and orchard construction in mountain areas of Japan

Novel technologies have been necessary for improving fruit quality and productivity of citrus,labor-saving and orchard conservation on steep slope lands since aging of growers and decrease in the number of successors is remarkable in mountain areas of southwestern Japan. The purpose of this paper is to introduce new technologies for improving citrus production that have been developed in recent years. A new fruit quality control system using drip irrigation and liquid fertilization technique combined with year-round plastic mulching was developed, and it enables high quality and stable citrus fruit production. Water and/or nutrient solution is automatically supplied through drip tubes that are laid under the mulching sheets to give adequate water stress, so as to improve sugar and acid content of fruit. A new transportation system for steep sloping citrus orchards, which is a combination of the monorail system and contour narrow paths, was suggested. A small walking cultivator was developed to explain the procedure of narrow path excavation. After introducing the narrow path, working hours for fertilizer and chemicalherbicide application were reduced. Disasterpr evention mapping of citrus orchards on slope landswas developed based on computer-aided seepage estimation and topographic data. The mapping can show zones of both ascending flow and descendingflow of underground water during heavy rains incitrus orchards. The mapping is considered to be effective for the management of orchards andprevention of erosion on slope lands.     

Floodplain sedimentation and sensitivity: summer 1993 flood,Upper Mississippi River Valley

Patterns of overbank sedimentation in the vicinity of, and far removed from, levee breaks that occurred in response to the >100 year, summer 1993 flood in the upper Mississippi River valley are elucidated. Two suites of overbank deposits were associated with the failure of artificial levees within a 70 km long study reach. Circumjacent sand deposits are a component of the levee break complex that develops in the immediate vicinity of a break site. As epitomized by the levee break complex at Sny Island, these features consist of an erosional, scoured and/or stripped zone, together with a horseshoe-shaped, depositional zone. At locales farther removed from the break site, the impact of flooding was exclusively depositional and was attributed to the settling of suspended sediment from the water column. The overall picture was one of modest scour at break sites and minimal suspended deposition (<4 mm) at locales farther removed from the breach. Downriver from the confluence with the Missouri River, suspended sediment deposition was of a similar magnitude to that observed within the study reach and levee break complexes exhibited a similar morphology, but scour at break sites was greatly enhanced and the excavated sand formed extensive deposits on the floodplain surface. The different erosional response was probably engendered by the higher sand content and reduced aggregate cohesion of the floodplain soils downriver from the confluence with the Missouri River. A qualitative comparison serves to highlight the influence that the resistance threshold may have on the sensitivity of floodplains bordering large low-gradient rivers to high magnitude floods. © 1997 John Wiley & Sons, Ltd.     

Land transformation and pond sediment information

Five years of observations on sedimentation rates in two ponds located near transformed land areas in the Kobe district of central Japan have shown the relationship between sedimentation and development during land transformation. One of the ponds observed has artificial land transformation in its drainage area (KR), whereas the other does not (KN). The sedimentation rate in the pond without artificial land transformation is roughly proportional to the rainfall intensity, whereas in the pond with land transformation it is related to change in the transformed area as well as the rainfall intensity. The relative sedimentation rate (sedimentation rate divided by the catchment area and rainfall intensity) is also related to loss on ignition and grain density; large relative sedimentation rates correspond to low loss on ignition and high grain density, suggesting that these factors are very sensitive to land transformation. Changes in catchment factors, which indicate the topographical and hydrological conditions in the catchment area, are inversely proportional to change in the ratio of the reclaimed to the natural area; this is indicative of change in the erodibility of the surface material in the catchment area. © 1997 John Wiley & Sons, Ltd.     

An analysis of soil crust strength in relation to potential abrasion by saltating particles

Wind erosion depends on the ease with which particles can be detached from the soil surface, but suitable tests to characterize this property are not available. Two possible methods to determine surface soil strength in the field were therefore compared on a range of artificially ‘crusted’ surfaces. These were made by spraying or tension wetting aggregates (10–2, 2–0.5 and <0.5 mm) from a structurally unstable sandy loam, followed by drying. Each test involved measuring the force exerted on a probe driven at a steady rate into the surface, using either a flat-tipped 0.6 mm diameter penetrometer or a flat-ended cylindrical punch with inner and outer diameters of 5 and 6 mm, respectively. Both probes showed that crusts could be produced reproducibly. Depending on the probe and aggregate size, penetration mainly occurred either as a result of aggregates being deflected out of the pathway of the probe or by genuine rupture of aggregates or of the crusted surface. The penetrometer, because it was comparable to the size of sand grains, gave results that can be used to characterize surface erodibility to saltating particles. The punch gave results that would be unsuitable for this purpose, as would other strength tests that are on too large a scale. Penetrometer results were analyzed to calculate the energy required for penetration. It was thus possible to demonstrate that only the spray-wetted fine aggregates had a surface that could undergo large-scale rupture by saltating sand grains. For all other surfaces, saltating particles would be unable to supply sufficient energy to rupture aggregates or the crusted surface. Erosion could only occur by a slower process of abrasion in which smaller particles or aggregates are chipped away from the surface. However, it is shown that saltating particles could rupture the interaggregate bonding in the 2–0.5 mm aggregate surfaces, thus permitting creep. An alternative and potentially simpler way of characterizing surface erodibility by using a surface modulus of elasticity is also discussed. Our results demonstrate that the small diameter penetrometer is a promising technique for characterizing erodibility of aggregated and crusted surfaces. © 1997 by John Wiley & Sons, Ltd.