ANALYSIS OF SOIL EROSION CHARACTERISTICS AND SEDIMENT SOURCES FOR THE YANTZE THREE GORGES REGION

In this paper the researches made in 1981-1990 have identified that the annual soil loss in the Three Gorges region is 157 million t. and the annual incoming sediment load of the Three Gorges reservoir is 40 million t. Soil erosion increases with the destruction of vegetative cover and its subsequent evolution. The annual amounts of sediment erosion for forest land, shrub land, grassland and farmland make up respectively 6.19%, 10.76%, 23.05% and 60% of the total erosion of the Three Gorges region; the quantities of incoming sediment load to the Yangtze River from the above four types of land account for 5.95%, 12.42%, 35.46% and 46.1 % of the total amount of sediment transported to the reservoir. The farmland of offers the main source of sediment. Gravitational erosion produces more bed loads, which will present serious threat to the Three Gorges Project if entering the reservoir. Resettlement of people to the upper parts of the mountainous areas for agricultural production will increase the sediment yield of the Three Gorges region by 10-20 million t and increase the incoming sediment of the Yangtze River by 50-60 million t. Consequently, it is necessary to make a realistic assessment of the soil erosion in the Three Gorges region.     

利用马氏过程模拟和预测土壤侵蚀的动态演变─—以安徽省岳西县为例

本文根据安徽省岳西县１９５８－１９８２－１９９２年三个时期的遥感资料所编制的土壤侵蚀图，用点数转化法定量地分析岳西县上述两个阶段侵蚀演变和浸蚀类型之间的相互转化状况，确定相应的初始状态下（１９５８和１９８２）的转移概率矩阵，应用马尔科夫过程摸拟和预测岳西县土壤侵蚀及其格局的动态演变过程和未来演变趋势。     

Inherent relationship of the USLE,RUSLE topographic factor algorithms and its impact on soil erosion modelling

ABSTRACT

The accurate representation of the Earth’s surface plays a vital role in soil erosion modelling. Topography is parameterized in the Universal Soil Loss Equation (USLE) and Revised USLE (RUSLE) by the topographic (LS) factor. For slope gradients of < 20%, soil loss values are similar for both models, but when the gradient is increased, RUSLE estimates are only half of those of USLE. The study aims to assess the validity of this statement for complex hillslope profiles. To that end, both models were applied at eight diverse mountainous sub-watersheds. The USLE and RUSLE indices were estimated utilizing the SEAGIS model and a European dataset, respectively. LS factors were in a 3:1 ratio (i.e. USLE:RUSLE) considering the entire basin area. For areas with slopes <20%, gross erosion estimates of both models converged. Sites of strong relief (>20%) USLE yielded significantly higher values than RUSLE.     

RS技术在实时区域土壤侵蚀评价中的应用--以福建省花山溪流域为例

传统数据采集方法严重制约了土壤侵蚀评价实时、快速的要求。文章以福建花山溪流域为例,基于“通用土壤侵蚀方程式”(USLE)为土壤侵蚀定量评价模型,利用多时效、多光谱的遥感数据,在ERDAS8．5软件平台上,研究提取流域动态最易变化的植被、土地利用类型等信息的技术方法。研究结果证实,这种方法可以快速、准确地提取影响土壤侵蚀的基本参数．进而实现对区域流域土壤侵蚀的实时评价。     

Natural and artificial connections between atoll islets in the pacific,their process and environmental impact

Three types of natural connection between atoll islets are described. Causeway, as an artificial way of connecting islets, makes a connection to be completed in a few months. In this case shore adjustment becomes more vigorous than that in natural conditions, resulting in lagoon shore erosion. A causeway without short bridges or culverts should be built close to the lagoon shore to reduce lagoon shore erosion. A causeway-crossing channel assemblage is the worst type among all of the connection engineering constructions because the crossing channel traps sediment and further transports it out of the channel, resulting in long period coastal erosion. Reforming Nippon Causeway in Tarawa Atoll, Kiribati by simple means will stop sand loss, reduce shore erosion and greatly upgrade its stability.     

Simulations demonstrating interaction between coarse and fine sediment loads in rain‐impacted flow

Rain‐impacted flows dominate sheet and interrill erosion and are important in eroding soil rich in nutrients and other chemicals which may have deleterious effects on water quality. Erosion in rain‐impacted flow is associated with raindrop detachment followed by transport either by the combination of flow velocity and raindrop impact (raindrop‐induced flow transport, RIFT) or the inherent capacity of the flow to transport detached material. Coarse particles tend to be transported by RIFT, while fine particles tend to be transported without any assistance from raindrop impact. Because the transport process associated with coarse particles is not 100 per cent efficient, it generates a layer of loose particles on the soil surface and this layer protects the underlying soil from detachment. Simulations were performed by modelling the uplift and downstream movement of both fine and coarse particles detached from the soil surface by individual raindrop impacts starting with a surface where no loose material was present. The simulations produced a flush of fine material followed by a decline in the discharge of fine material as the amount of loose material built up on the bed. The decline in the discharge of fine material was accompanied by an increase in the discharge of coarse material. The relative amounts of coarse and fine material discharged in the flow varied with flow velocity and cohesion in the surface of the soil matrix. The results indicate that the discharge of various sized sediments is highly dependent on local soil, rain and flow conditions and that extrapolating the results from one situation to another may not be appropriate. Copyright © 2006 John Wiley & Sons, Ltd.     

Model study of the relationship between sediment yield and river basin area

The SHETRAN physically based, spatially distributed model is used to investigate the scaling relationship linking specific sediment yield to river basin area, for two contrasting topographies of upland and more homogeneous terrain and as a function of sediment source, land use and rainfall distribution. Modelling enables the effects of the controls to be examined on a systematic basis, while avoiding the difficulties associated with the use of field data (which include limited data, lack of measurements for nested basins and inability to isolate the effects of individual controls). Conventionally sediment yield is held to decrease as basin area increases, as the river network becomes more remote from the headwater sediment sources (an inverse relationship). However, recent studies have reported the opposite variation, depending on the river basin characteristics. The simulation results are consistent with these studies. If the sediment is supplied solely from hillslope erosion (no channel bank erosion) then, with uniform land use, sediment yield either decreases or is constant as area increases. The downstream decrease is accentuated if rainfall (and thence erosion) is higher in the headwaters than at lower elevations. Introducing a non‐uniform land use (e.g. forest at higher elevations, wheat at lower elevations) can reverse the trend, so that sediment yield increases downstream. If the sediment is supplied solely from bank erosion (no hillslope erosion), the sediment yield increases downstream for all conditions. The sediment yield/basin area relationship can thus be inverse or direct, depending on basin characteristics. There still remains, therefore, considerable scope for defining a universal scaling law for sediment yield. Copyright © 2006 John Wiley & Sons, Ltd.     

Spatial and temporal variations in bank erosion on sand‐bed streams in the seasonally wet tropics of northern Australia

Bank erosion rates and processes across a range of spatial scales are poorly understood in most environments, especially in the seasonally wet tropics of northern Australia where sediment yields are among global minima. A total of 177 erosion pins was installed at 45 sites on four sand‐bed streams (Tributaries North and Central, East Tributary and Ngarradj) in the Ngarradj catchment in the Alligator Rivers Region. Bank erosion was measured for up to 3·5 years (start of 1998/99 wet season to end of 2001/02 wet season) at three spatial scales, namely a discontinuous gully (0·6 km²) that was initiated by erosion of a grass swale between 1975 and 1981, a small continuous channel (2·5 km²) on an alluvial fan that was formed by incision of a formerly discontinuous channel between 1964 and 1978, and three medium‐sized, continuous channels (8·5–43·6 km²) with riparian vegetation. The bank erosion measurements during a period of average to above‐average rainfall established that substantial bank erosion occurred during the wet season on the two smaller channels by rapid lateral migration (Tributary Central) and by erosion of gully sidewalls due to a combination of within‐gully flows and overland flow plunging over the sidewalls (Tributary North). Minor bank erosion also occurred during the dry season by faunal activity, by desiccation and loss of cohesion of the sandy bank sediments and by dry flow processes. The larger channels with riparian vegetation (East Tributary and Ngarradj) did not generate significant amounts of sediment by bank erosion. Deposition (i.e. negative pin values) was locally significant at all scales. Bank profile form and channel planform exert a strong control on erosion rates during the wet season but not during the dry season. Copyright © 2006 Commonwealth Government of Australia.     

The effects of rock uplift and rock resistance on river morphology in a subduction zone forearc,Oregon, USA

Relationships between riverbed morphology, concavity, rock type and rock uplift rate are examined to independently unravel the contribution of along-strike variations in lithology and rates of vertical deformation to the topographic relief of the Oregon coastal mountains. Lithologic control on river profile form is reflected by convexities and knickpoints in a number of longitudinal profiles and by general trends of concavity as a function of lithology. Volcanic and sedimentary rocks are the principal rock types underlying the northern Oregon Coast Ranges (between 46°30′ and 45°N) where mixed bedrock–alluvial channels dominate. Average concavity, θ, is 0·57 in this region. In the alluviated central Oregon Coast Ranges (between 45° and 44°N) values of concavity are, on average, the highest (θ = 0·82). South of 44°N, however, bedrock channels are common and θ = 0·73. Mixed bedrock–alluvial channels characterize rivers in the Klamath Mountains (from 43°N south; θ = 0·64). Rock uplift rates of ≥0·5 mm a⁻¹, mixed bedrock–alluvial channels, and concavities of 0·53–0·70 occur within the northernmost Coast Ranges and Klamath Mountains. For rivers flowing over volcanic rocks θ = 0·53, and θ = 0·72 for reaches crossing sedimentary rocks. Whereas channel type and concavity generally co-vary with lithology along much of the range, rivers between 44·5° and 43°N do not follow these trends. Concavities are generally greater than 0·70, alluvial channels are common, and river profiles lack knickpoints between 44·5° and 44°N, despite the fact that lithology is arguably invariant. Moreover, rock uplift rates in this region vary from low, ≤0·5 mm a⁻¹, to subsidence (<0 mm a⁻¹). These observations are consistent with models of transient river response to a decrease in uplift rate. Conversely, the rivers between 44° and 43°N have similar concavities and flow on the same mapped bedrock unit as the central region, but have bedrock channels and irregular longitudinal profiles, suggesting the river profiles reflect a transient response to an increase in uplift rate. If changes in rock uplift rate explain the differences in river profile form and morphology, it is unlikely that rock uplift and erosion are in steady state in the Oregon coastal mountains. Copyright © 2006 John Wiley & Sons, Ltd.     

The interaction between armouring and particle weathering for eroding landscapes

The interaction between particle weathering and surface armouring and its effect on erosion has been investigated. The effect of soil armouring is to decrease sediment transport with time by preferentially stripping away fine particles. On the other hand the effect of weathering, which breaks down the particles in the armour, is generally believed to increase erosion. By extending an existing armouring model, ARMOUR, and using a variety of published weathering mechanisms this interaction has been explored. The model predicts that while this is generally true, in some cases erosion can be decreased by weathering. When the particles generated by weathering were approximately of equal diameter, erosion increased while armouring decreased. When weathering produced very fine particles by spalling, erosion increased and armouring also increased. When weathering produced a range of particles from fine to coarse, the armour layer broke down and erosion decreased relative to the no‐weathering case. This latter decrease in erosion was due to the high entrainment of coarser transportable materials from the bed decreasing the sediment transport capacity of the flow. In these studies clear regimes could be identified where erosion was limited by either the energy of the flow alone (i.e. ‘transport‐limited’), or the rate of weathering (‘weathering‐limited’); however, for some mechanisms there was an interaction between the two, which we called ‘weathering/transport limited’. Copyright © 2006 John Wiley & Sons, Ltd.