盆地深部穹隆构造发育特征、成因机制及石油地质意义——以塔里木盆地顺北地区为例

塔里木盆地顺北地区奥陶系碳酸盐岩中广泛发育穹隆构造.为研究盆地深部穹隆构造的发育特征、成因机制及石油地质意义,基于顺北地区高精度三维地震资料,对穹隆构造开展几何学定量解析,确定其空间分布规律及内部结构样式;结合区域构造背景及盆内构造发育特征,明确其成因机制;在此基础上,结合生产动态数据探讨穹隆构造的控储—控藏作用.研究...     

煤层气损失气量计算的全脱分析法

针对目前煤层气损失气量无法计算煤层的溶解气和游离气含量问题,根据烃类气体进入钻井液的方式和分布状态理论,基于气测录井资料,提出了计算煤层气损失气量的新方法——全脱分析法。通过沁水盆地枣园区块3号煤层的实际应用,发现该方法计算的损失气量明显高于常规煤心样品的回归结果,前者一般为后者的1.5~4.5倍。该方法不仅能有效地解决煤层气损失气量计算中忽视的溶解气和游离气问题,而且还能消除损失时间的影响,同时也可以按不同部位计算煤层气损失气量。该方法适用于不同煤级、各种结构的煤岩,数据易采集,计算过程简单,有很好的应用前景。      

下刚果—刚果扇盆地断裂特征及其对油气成藏的影响

下刚果—刚果扇盆地油气资源丰富、油气成藏条件优越。但由于受到盐岩的活动及区域构造应力场的作用,形成了复杂的断裂系统。此文系统分析了下刚果—刚果扇盆地的断裂特征及其对油气成藏的影响,研究认为该区平面上主要发育5个断裂带,纵向上主要发育上下两套断裂系统。断裂的形成和演化可分为三个期次,相对应可将断层分为三个级别的断层。断层的形成机制主要有盐活动及盐构造、重力滑脱作用以及古地貌格局。烃源岩的排烃时间与第三期断层活动时间相匹配,非常有利于油气沿断层进行垂向和斜侧向运移。分析认为研究区主要发育沿断阶带—碳酸盐岩运聚成藏模式、沿断层垂向运聚成藏模式以及沿盐下砂体—盐窗和Focus点运聚成藏模式共三种成藏模式。断层封堵较好,油源断层高度决定了油气运移高度和油气田规模,直接控制着油气的分布层系及规模。研究成果可指导研究区或类似地区的油气勘探。     

南黄海盆地二叠系烃源岩孢粉相特征及其形成环境

以沉积环境控制烃源岩发育理论为指导,应用孢粉相分析方法,以南黄海盆地二叠系大隆组、龙潭组和栖霞组烃源岩层段为研究对象,对典型钻井剖面的孢粉及沉积有机屑进行系统的分析。根据沉积有机屑的丰度特征和组分类型,探讨三套烃源岩的形成环境,初步评价其生烃潜力。研究结果表明,利用孢粉相分析方法,可以有效地对高成熟海相烃源岩的生烃潜力和形成环境进行客观评价:栖霞组为缺氧远陆架沉积环境,以无定形有机质为主,水体分层缺氧,是烃源岩形成的有利环境;大隆组为缺氧和少氧的陆架环境,也较有利于烃源岩的形成,生烃潜力较栖霞组差;龙潭组煤质型有机质较为丰富,为充氧的陆架区,以陆源输入为主,沉积区水体较浅,含氧量高,不利于富氢烃源岩的形成。     

通化盆地下白垩统烃源岩石油地质特征及生烃潜力研究

通化盆地是松辽盆地东部外围的油气远景区之一,烃源岩发育特征和生烃潜力等问题未知,制约着盆地基础油气资源研究和后续油气资源勘探部署工作。为揭示通化盆地下白垩统烃源岩生烃潜力和页岩油气的赋存状态,在盆地内部署通地1井,对岩芯样品进行系统取样,完成了暗色泥岩有机质丰度、类型和成熟度的测试工作。实验结果表明,通化盆地下白垩统亨通山组暗色泥岩有机质丰度较高,有机质类型以Ⅰ-Ⅱ1型为主,局部含有Ⅲ型,镜质组反射率分布范围为0.972%~1.127%,已进入大量生烃的成熟阶段;下桦皮甸子组暗色泥岩有机质丰度较高,有机质类型以Ⅰ型为主,局部含有Ⅱ和Ⅲ型,镜质组反射率在0.986%~1.399%之间,已进入大量生烃的成熟阶段。其地球化学特征和世界上许多页岩油气田的烃源岩有相似之处,综合研究表明通化盆地下白垩统具有较好的常规油气和页岩气生成潜力。     

准噶尔盆地玛湖凹陷大油（气）区形成条件与勘探方向研究

准噶尔盆地西北缘玛湖凹陷是全球著名的湖相富烃凹陷,最新勘探成果展示出大油(气)区特征。为及时总结,丰富发展当代中国特色叠合盆地油气地质理论与勘探实践,本文主要分析了这一大油(气)区的基本形成条件与勘探领域。结果表明,玛湖凹陷大油(气)区得以形成主要缘于三大有利基础条件:前陆碱湖优质高效烃源岩、立体输导体系、三类规模有效储层与储盖组合,由此造就油气在充足的烃源条件下,沿立体的输导体系,被三套区域性盖层有效封盖,向着三类规模有效储层,在有利圈闭中运聚成藏,因此油气富集规律可归纳为"源-输控烃、储-盖控藏"。相应,按目的层和圈闭类型形成了三大有利油气成藏领域,由浅至深依次为三叠系下统百口泉组岩性油(气)藏群、二叠系下统风城组致密油、石炭系—下二叠统大构造油气藏群。玛湖凹陷大油(气)区的勘探突破缘于勘探理念创新,具有巨大勘探潜力和基础科学研究意义。     

北海盆地维京地堑渐新统砂岩侵入体形态特征及成因

砂岩侵入体是由处于浅埋藏阶段、尚未固结的砂质沉积物发生液化并侵入到上覆盖层所形成的一类软沉积物变形,在北海盆地维京地堑渐新统地层中非常发育。为探讨砂岩侵入体的形态特征及诱发机制,通过高分辨率三维地震及测井资料,利用地震反射结构分析、地震相干切片等手段对砂岩侵入现象进行了识别;并结合多边形断层系统、流体充注与砂岩侵入之间的关联性,对砂岩侵入体的成因机制进行了分析。结果表明:在地震剖面上可识别的砂岩侵入体多呈V型或W型强振幅反射特征,其横向展布规模约1~2 km,垂向侵入高度约100~200 m;流体的大规模充注及多边形断层诱发盖层破裂是形成砂体内部超压并诱发其发生液化的关键因素。砂岩侵入体在形成之后可以作为流体运移通道,对强化流体的垂向运移具有重要意义;并且砂岩侵入体本身即可作为油气的有利储集体。因此识别并分析砂岩侵入体的成因机理,对盖层封闭性评价及油气勘探具有重要指导意义。     

Effects of Deep Fluids on Hydrocarbon Generation and Accumulation in Chinese Petroliferous Basins

Deep fluids in a petroliferous basin generally come from the deep crust or mantle beneath the basin basement, and they transport deep substances(gases and aqueous solutions) as well as heat to sedimentary strata through deep faults. These deep fluids not only lead to large-scale accumulations of CO_2, CH_4, H_2, He and other gases, but also significantly impact hydrocarbon generation and accumulation through organic-inorganic interactions. With the development of deep faults and magmatic-volcanic activities in different periods, most Chinese petroliferous basins have experienced strong impacts associated with deep fluid activity. In the Songliao, Bohai Bay, Northern Jiangsu, Sanshui, Yinggehai and Pearl Mouth Basins in China, a series of CO_2 reservoirs have been discovered. The CO_2 content is up to 99%, with δ~(13)C_(CO2) values ranging from-4.1‰ to-0.37‰ and ~3He/~4He ratios of up to 5.5 Ra. The abiogenic hydrocarbon gas reservoirs with commercial reserves, such as the Changde, Wanjinta, Zhaozhou, and Chaoyanggou reservoirs, are mainly distributed in the Xujiaweizi faulted depression of the Songliao Basin. The δ~(13)CCH4 values of the abiogenic alkane gases are generally -30‰ and exhibit an inverse carbon isotope sequence of δ~(13)C_(CH4)δ~(13)C_(C2H6)δ~(13)C_(C3H8)δ~(13)C_(C4H10). According to laboratory experiments, introducing external H_2 can improve the rate of hydrocarbon generation by up to 147% through the kerogen hydrogenation process. During the migration from deep to shallow depth, CO_2 can significantly alter reservoir rocks. In clastic reservoirs, feldspar is easily altered by CO_2-rich fluids, leading to the formation of dawsonite, a typical mineral in high CO_2 partial pressure environments, as well as the creation of secondary porosity. In carbonate reservoirs, CO_2-rich fluids predominately cause dissolution or precipitation of carbonate minerals. The minerals, e.g., calcite and dolomite, show some typical features, such as higher homogenization temperatures than the burial temperature, relatively high concentrations of Fe and Mn, positive Eu anomalies, depletion of 18 O and enrichment of radiogenic ~(87)Sr. Due to CO_2-rich fluids, the development of high-quality carbonate reservoirs is extended to deep strata. For example, the Well TS1 in the northern Tarim Basin revealed a high-quality Cambrian dolomite reservoir with a porosity of 9.1% at 8408 m, and the Well ZS1 C in the central Tarim Basin revealed a large petroleum reserve in a Cambrian dolomite reservoir at ~6900 m. During the upward migration from deep to shallow basin strata, large volumes of supercritical CO_2 may extract petroleum components from hydrocarbon source rocks or deep reservoirs and facilitate their migration to shallow reservoirs, where the petroleum accumulates with the CO_2. Many reservoirs containing both supercritical CO_2 and petroleum have been discovered in the Songliao, Bohaiwan, Northern Jiangsu, Pearl River Mouth and Yinggehai Basins. The components of the petroleum trapped with CO_2 are dominated by low molecular weight saturated hydrocarbons.     

松辽盆地三肇地区扶杨油层油气成藏过程主控因素及成藏模式

从多元地质条件及其时空匹配关系的角度出发,对三肇地区扶杨油层油气成藏过程中的主控因素进行分析。结果表明:上覆青山口组一段源岩有效排烃范围、超压和T₂反射层油源断裂组合关系控制了油气垂向向下“倒灌”的运移范围、距离及层位;古构造背景、T₂断层与储层砂体配置关系控制着油气侧向运移的方向、通道和距离;基准面旋回、沉积微相类型与现今构造配置关系控制着油气的垂向聚集层位及平面分布规律。在此基础上,结合构造发育史、油源条件及沉积微相研究成果,对研究区扶杨油层油气成藏模式进行了总结,认为研究区扶杨油层主要存在4种成藏模式:源内--顶生下储式油气成藏模式、近源--短距离侧向运移--斜坡带断层遮挡油气成藏模式、源外--长距离侧向运移--继承性构造隆起带油气成藏模式、多源--多方式侧向运移油气成藏模式。     

Electrokinetic Removal of Petroleum Hydrocarbon from Residual Clayey Soil Following a Washing Process

This study investigates total petroleum hydrocarbon (TPH) removal from residual clayey soil, after a washing procedure, using an electrokinetic process. Eight electrokinetic experiments were carried out to investigate the characteristics of TPH removal. When 0.1 M MgSO₄ or 0.1 M NaOH was used as an electrolyte, the electric current rapidly increased within the first 100 or 200 h, respectively. A negatively charged soil surface resulted in a more negative zeta potential and greater electroosmotic flow toward the cathode. Therefore, the accumulated electroosmotic flow (EOF) when using 0.1 M NaOH as the anolyte‐purging solution was higher than when using 0.1 M MgSO₄. Although the energy consumption for the two purging solutions was similar, the efficiencies of TPH removal when 0.1 M MgSO₄ and 0.1 M NaOH with surfactant were used were 0 and 39%, respectively, because the electroosmotic flow rate increased with TPH removal efficiency. When 5% isopropyl alcohol (IPA) was used as a circulation solution, the electric current increased but the TPH removal was similar to that using water. In terms of energy consumption, the use of a surfactant‐enhanced electrokinetic process with NaOH as electrolyte was effective in removing TPHs from low‐permeability soil.