A 2D finite volume model for bebris flow and its application to events occurred in the Eastern Pyrenees

FLATModel is a 2D finite volume code that contains several original approaches to improve debris-flow simulation. Firstly, FLATModel incorporates a ＂stop-and-go＂ technique in each cell to allow continuous collapses and remobilizations of the debris-flow mass. Secondly, flow velocity and consequently yield stress is directly associated with the type of rheology to improve boundary accuracy. Thirdly, a simple approach for entrainment is also included in the model to analyse the effect of basal erosion of debris flows. FLATMODEL was tested at several events that occurred in the Eastern Pyrenees and simulation results indicated that the model can represent rather well the different characteristics observed in the field.     

Runoff quality prediction from small urban catchments using SWMM

The RUNOFF block of EPA's storm water management model (SWMM) was used to simulate the quantity and quality of urban storm water runoff from four relatively small sites (i.e. 5·97–23·56 ha) in South Florida, each with a specific predominant land use (i.e. low density residential, high density residential, highway and commercial). The objectives of the study were to test the applicability of this model in small subtropical urban catchments and provide modellers with a way to select appropriate input parameters to be used in planning studies. A total of 58 storm events, measured by the US Geological Survey (USGS), provided hyetographs, hydrographs and pollutant loadings for biological oxygen demand (BOD₅), total suspended solids (TSS), total Kjeldahl nitrogen (TKN) and lead (Pb), and were used for calibration of the model. Several other catchment characteristics, also measured or estimated by USGS, were used in model input preparation. Application of the model was done using the Green–Ampt equation for infiltration loss computation, a pollutant accumulation equation using a power build-up equation dependent on the number of dry days, and a power wash-off equation dependent on the predicted runoff rate. Calibrated quantity input parameters are presented and compared with suggested values in the literature. The impervious depression storage was generally found to be the most sensitive calibration parameter, followed by the Manning's roughness coefficients of conduit and overland flow, the Green–Ampt infiltration parameters and, finally, the pervious depression storage. Calibrated quality input parameters are presented in the form of regression equations, as a function of rainfall depth and the number of antecedent dry days. A total of 16 independent rainfall events were used for verification of the model, which showed a good comparison with observed data for both hydrographs and pollutant loadings. Average model predictions for the four constituent concentrations from the verification runs also showed good agreement with NURP published values in Florida and US sites. © 1998 John Wiley & Sons, Ltd.     

Prediction of railway ground vibrations: Accuracy of a coupled lumped mass model for representing the track/soil interaction

Recent advances in railway-induced ground vibrations showed that the track/soil interaction plays an important role in the low frequency range. This paper contributes to the numerical analysis of train/track/foundation dynamics by presenting the accuracy of a coupled lumped mass (CLM) model devoted to the railway foundations and to the track/soil coupling. Following a summary of the background and the advantages of the CLM model, the coupling strategy is quantified through two application cases. Firstly, the dynamic track deflection is calculated for different railway lines considering various degrees of complexities of foundations. Then, the foundation responses are compared depending on whether detailed coupling is introduced or not. The benefit of the proposed model is emphasized by presenting free-field ground vibration responses generated by a tram and a high-speed train, obtained by a revisited two-step prediction model developed by the authors.     

Rock warming and drying under simulated intertidal conditions,part II: weathering and biological influences on evaporative cooling and near‐surface micro‐climatic conditions as an example of biogeomorphic ecosystem engineering

The way in which rocks and engineering materials heat‐up and dry‐out in the intertidal zone is of relevance to both weathering and ecology. These behaviours can be measured in the laboratory under controlled conditions designed to replicate those occurring in the field. Previous studies have demonstrated differences in thermal behaviours between rock types and through time as a result of soiling in terrestrial environments, but the influence of weathering and colonization on rock behaviours in the intertidal zone has not been previously assessed. We measured the warming and drying of blocks of rock (limestone and granite) and marine concrete during ‘low‐tide’ events simulated in the laboratory, before and after a period of exposure (eight months) on rock platforms in Cornwall, UK. As well as differences between the material types, temperatures of control (unexposed) and field‐exposed blocks differed in the order of 1 to 2 °C. Drying behaviours were also different after field exposure. Differences during the first few hours of exposure to air and heat were attributed to discolouration and albedo effects. Over longer periods of time, changes in the availability of near‐surface pore water as a result of micro‐scale bioerosion of limestone and the development of bio‐chemical crusts on marine concrete [observed using scanning electron microscopy (SEM)] are suggested as mechanisms enhancing and reducing, respectively, the efficiency of evaporative cooling. The retention of moisture by epilithic biofilms may also influence thermal and drying behaviours of granite. These observations represent one of the first examples of cross‐scalar biogeomorphic linkages in the intertidal zone. The significance of the results for the subsequent efficiency of weathering, and near‐surface micro‐climatic conditions experienced by colonizing organisms is discussed. The involvement of microorganisms in the creation of more (or less) ecologically stressful conditions through the alteration of substratum geomorphic properties and behaviours is suggested as an example of ‘biogeomorphic ecosystem engineering’. Copyright © 2011 John Wiley & Sons, Ltd.     

Crustal Growth by Magmatic Accretion Constrained by Metamorphic P-T Paths and Thermal Models of the Kohistan Arc, NW Himalayas

Magmatic accretion is potentially an important mechanism inthe growth of the continental crust and the formation of granulites.In this study, the thermal evolution of a magmatic arc in responseto magmatic accretion is modeled using numerical solutions ofthe one-dimensional heat conduction equation. The initial andboundary conditions used in the model are constrained by geologicalobservations made in the Kohistan area, NW Himalayas. Takingconsideration of the preferred intrusion locations for basalticmagmas, we consider two plausible modes of magmatic accretion:the first involves the repeated intrusion of basalt at mid-crustaldepths (‘intraplate model’), and the second evaluatesthe simultaneous intrusion of basalt and picrite at mid-crustaldepths and the base of the crust respectively (‘double-platemodel’). The results of the double-plate model accountfor both the inferred metamorphic P–T paths of the Kohistanmafic granulites and the continental geotherm determined frompeak P–T conditions observed for granulite terranes. Thedouble-plate model may be applicable as a key growth processfor the production of thick mafic lower crust in magmatic arcs. KEY WORDS: thermal model; magmatic underplating; P–T path; granulite; lower crust     

Superposition of gold mineralisation on pre‐existing carbonate alteration: Structural evidence from the Mulgarrie gold deposit,Yilgarn Craton

Carbonate alteration at the Mulgarrie gold mine in the Eastern Goldfields of Western Australia, is represented by porphyroblasts, veins and pervasive, texturally destructive, carbonatisation. Two foliations, S_1M and S_2M, were produced by two separate deformation events at the mine‐scale, D_1M and D_2M. D_1M and D_2M both occurred in response to regional D₂ tectonism. Carbonate alteration was the product of two separate episodes of fluid ingress: the earlier produced magnesite and the latter Fe‐dolomite. Both periods of carbonate alteration occurred pre‐ to early syn‐D_2M, when mafic to ultramafic komatiitic rocks reacted with fluids that moved along regional faults and pre‐date the alteration associated with regional peak metamorphism. Gold at Mulgarrie overprints pre‐ and late syn‐D₂ quartz veins in zones of massive carbonate alteration, suggesting it has a late‐ to post‐D₂ timing. This late timing agrees with the generally accepted syn‐D₃ (and younger) age for gold mineralisation in the Eastern Goldfields. We suggest that carbonate alteration at Mulgarrie is not a product of the hydrothermal event responsible for the gold mineralisation. Rather, the different relative timing of magnesite, Fe‐dolomite and gold indicates there were two carbonate‐producing fluid systems and a fluid transporting the gold overprinted these. Similarly, early carbonate alteration may play a role in localising auriferous vein deposits throughout the Yilgarn and other Archaean cratons.     

Sensitivity assessment of strontium isotope as indicator of polluted groundwater for hydraulic fracturing flowback fluids produced in the Dameigou Shale of Qaidam Basin

Hydrogeochemical processes that would occur in polluted groundwater and aquifer system, may reduce the sensitivity of Sr isotope being the indicator of hydraulic fracturing flowback fluids(HFFF) in groundwater. In this paper, the Dameigou shale gas field in the northern Qaidam Basin was taken as the study area, where the hydrogeochemical processes affecting Sr isotope was analysed. Then, the model for Sr isotope in HFFF-polluted groundwater was constructed to assess the sensitivity of Sr isotope as HFFF indicator. The results show that the dissolution can release little Sr to polluted groundwater and cannot affect the εSr(the deviation of the 87 Sr/86 Sr ratio) of polluted groundwater. In the meantime, cation exchange can considerably affect Sr composition in the polluted groundwater. The Sr with low εSr is constantly released to groundwater from the solid phase of aquifer media by cation exchange with pollution of Quaternary groundwater by the HFFF and it accounts for 4.6% and 11.0% of Sr in polluted groundwater when the HFFF flux reaches 10% and 30% of the polluted groundwater, respectively. However, the Sr from cation exchange has limited impact on Sr isotope in polluted groundwater. Addition of Sr from cation exchange would only cause a 0.2% and 1.2% decrease in εSr of the polluted groundwater when the HFFF flux reaches 10% and 30% of the polluted groundwater, respectively. These results demonstrate that hydrogeochemical processes have little effect on the sensitivity of Sr isotope being the HFFF indicator in groundwater of the study area. For the scenario of groundwater pollution by HFFF, when the HFFF accounts for 5%(in volume percentage) of the polluted groundwater, the HFFF can result in detectable shifts of εSr(ΔεSr=0.86) in natural groundwater. Therefore, after consideration of hydrogeochemical processes occurred in aquifer with input of the HFFF, Sr isotope is still a sensitive indicator of the Quaternary groundwater pollution by the HFFF produced in the Dameigou shale of Qaidam Basin.     

Applying essentially non‐oscillatory interpolation to controlled‐source electromagnetic modelling*

Modelling and inversion of controlled‐source electromagnetic (CSEM) fields requires accurate interpolation of modelled results near strong resistivity contrasts. There, simple linear interpolation may produce large errors, whereas higher‐order interpolation may lead to oscillatory behaviour in the interpolated result. We propose to use the essentially non‐oscillatory, piecewise polynomial interpolation scheme designed for piecewise smooth functions that contains discontinuities in the function itself or in its first or higher derivatives. The scheme uses a non‐linear adaptive algorithm to select a set of interpolation points that represent the smoothest part of the function among the sets of neighbouring points. We present numerical examples to demonstrate the usefulness of the scheme. The first example shows that the essentially non‐oscillatory interpolation (ENO) scheme better captures an isolated discontinuity. In the second example, we consider the case of sampling the electric field computed by a finite‐volume CSEM code at a receiver location. In this example, the ENO interpolation performs quite well. However, the overall error is dominated by the discretization error. The other examples consider the comparison between sampling with essentially non‐oscillatory interpolation and existing interpolation schemes. In these examples, essentially non‐oscillatory interpolation provides more accurate results than standard interpolation, especially near discontinuities.     

藏南拉康温泉地质特征及雄曲河谷两岸地热分布不均成因分析

西藏山南地区洛扎县雄曲河拉康段在600 m距离内出露温泉4处,仅1处位于河谷右岸;平硐勘查显示两岸岩性、产状、构造一致,地热异常却仅在左岸平硐内部显著,右岸平硐地热异常不明显.本次研究以此异常为出发点,通过片麻状花岗岩不同切面导热实验、片麻状花岗岩与板岩相同切面导热实验,温泉水δ2H,δ18O同位素测试分析等方法,探究...     

Digital Archiving and On-line Publishing of Old Relief Models

Abstract

Although people rarely think of relief models when speaking about cartographic products, these artefacts are probably the most impressive way of visualizing landscapes. Unlike traditional maps or globes, most relief models are unique, vulnerable hand-made objects. Digital archiving is an important step in their preservation. There are special tools for this task, but these equipments are rather expensive, and libraries or other institutes that usually own these models cannot spend too much. The authors examined various on-line tools to create digital 3D representation of relief models using a set of photographs as source. These tools create point cloud and textured triangle mesh based on matching patterns on the photos. A workflow was developed which uses these web services and produces the digital 3D version of relief models. This paper introduces the method, discusses the details of successful photographing, the possible post-processing of the results. A new web site, using the X3DOM technology to show the digitized models to the general public, is also introduced.