Tectono–Thermal Evolution, Hydrocarbon Filling and Accumulation Phases of the Hari Sag, in the Yingen–Ejinaqi Basin, Inner Mongolia, Northern China

This work restored the erosion thickness of the top surface of each Cretaceous formations penetrated by the typical well in the Hari sag, and simulated the subsidence burial history of this well with software BasinMod. It is firstly pointed out that the tectonic subsidence evolution of the Hari sag since the Cretaceous can be divided into four phases: initial subsidence phase, rapid subsidence phase,uplift and erosion phase, and stable slow subsidence phase. A detailed reconstruction of the tectonothermal evolution and hydrocarbon generation histories of typical well was undertaken using the EASY R_0% model, which is constrained by vitrinite reflectance(R_0) and homogenization temperatures of fluid inclusions. In the rapid subsidence phase, the peak period of hydrocarbon generation was reached at c.a.105.59 Ma with the increasing thermal evolution degree. A concomitant rapid increase in paleotemperatures occurred and reached a maximum geothermal gradient of about 43-45℃/km. The main hydrocarbon generation period ensued around 105.59-80.00 Ma and the greatest buried depth of the Hari sag was reached at c.a. 80.00 Ma, when the maximum paleo-temperature was over 180℃.Subsequently, the sag entered an uplift and erosion phase followed by a stable slow subsidence phase during which the temperature gradient, thermal evolution, and hydrocarbon generation decreased gradually. The hydrocarbon accumulation period was discussed based on homogenization temperatures of inclusions and it is believed that two periods of rapid hydrocarbon accumulation events occurred during the Cretaceous rapid subsidence phase. The first accumulation period observed in the Bayingebi Formation(K_1 b) occurred primarily around 105.59-103.50 Ma with temperatures of 125-150℃. The second accumulation period observed in the Suhongtu Formation(K_1 s) occurred primarily around84.00-80.00 Ma with temperatures of 120-130℃. The second is the major accumulation period, and the accumulation mainly occurred in the Late Cretaceous. The hydrocarbon accumulation process was comprehensively controlled by tectono-thermal evolution and hydrocarbon generation history. During the rapid subsidence phase, the paleo temperature and geothermal gradient increased rapidly and resulted in increasing thermal evolution extending into the peak period of hydrocarbon generation,which is the key reason for hydrocarbon filling and accumulation.     

Electrical analogy for modelling thermal regime and moisture distribution in sandy soils

The soil mass is subjected to temperature variation due to several human activities (viz. tanks storing heated fluids, buried cables and pipelines, air-conditioning ducts, disposal of nuclear and thermal power plant wastes etc.), which result in heat-induced migration of the moisture in it. Though several studies have been conducted in the past to investigate the mechanism of heat migration through the soil mass, a methodology for ‘real-time measurement of the variations in temperature, flux and moving moisture front, in tandem, with respect to space' has rarely been attempted. In this context, extensive laboratory investigations were conducted to measure real-time flux and temperature variations in the sandy soils, and the validation of results has been done by employing an equivalent electrical circuit programme, LTspice. Subsequently, a mathematical model PHITMDS (i.e. Prediction of Heat-Induced Temperature and Moisture Distribution in Soil) has been developed and its utility and efficacy, for predicting the depth-wise temperature and heat-induced moisture migration, due to evaporation, in terms of position of moving moisture front in the sandy soil has been critically discussed and demonstrated.     

青藏铁路多年冻土区含融化夹层路基的热状态

基于青藏铁路K1496+750监测断面含融化夹层路基长达10 a的地温监测数据,分析了在气候转暖及工程活动下天然场地及路基左右路肩下多年冻土热状态年变化过程、融化夹层的年变化过程及其对多年冻土热状态的影响。结果表明：监测断面天然场地、左右路肩下多年冻土上限逐年下降,热稳定性逐年降低;观测期内,左路肩下发育有融化夹层,融化夹层厚度在波动中呈增厚趋势,且其增厚主要是由多年冻土人为上限下降所致,而天然场地及右路肩下未发育融化夹层;多年冻土上限附近土体热积累显著,进而导致多年冻土上限逐年下降及其附近土体温度逐年升高,弱化了多年冻土的热稳定性;后期增加的块石护坡和热管两种具有“主动冷却”效能的工程补强措施很好的改善了路基的热稳定性,右路肩经工程补强措施后,多年冻土人为上限得到显著抬升,热稳定性得到显著改善,而左路肩由于融化夹层的存在,工程补强措施仅仅维持了当前多年冻土热状态,融化夹层的存在一定程度上弱化了工程补强措施所产生的冷却效能。     

基于GIPL2模型的青藏高原活动层土壤热状况模拟研究

青藏高原活动层土壤热状况,对深入了解高原活动层的厚度变化特征、下垫面的热力作用以及对气候变化预测均有重要意义。利用GIPL2模型模拟青藏高原多年冻土区不同植被状况下活动层土壤热状况。模拟结果表明：模型在高寒草原（QT06）试验点模拟效果较好,高寒沼泽草甸（QT03）试验点的模拟效果较差,高寒草甸（QT01）、高寒荒漠草原（QT05）和高寒草原化草甸（QT04）试验点的模拟效果介于高寒草原试验点和高寒沼泽草甸试验点之间。QT01、QT03、QT04、QT05和QT06的土壤温度模拟值与观测值相比,均方根误差分别为0.67、1.29、0.73、0.7和0.56℃;相关系数分别为0.99、0.87、0.98、0.98和0.96;平均误差分别为0.37、0.61、0.31、0.45和0.16℃。QT06模拟结果较好,原因在于此点土壤质地变化不大,模型的分层与所取的参数更加接近此点的实际状况。QT03模拟结果较差,可能由于此地区土壤中存在砾石,在导热率参数化方案中没有考虑砾石含量,导致模拟结果偏差较大。总体而言,GIPL2模型对青藏高原活动层土壤热状况的模拟具有一定的优势,是一种模拟多年冻土区活动层土壤热状况较为理想的模型。     

长春地区粉质黏土导热系数与其物性参数相关性研究

为研究导热系数与影响因素之间的相关关系,建立导热系数的推算公式,以长春地区粉质黏土为研究对象,对原状土样的导热系数与其物理参数之间的相关性进行回归分析。制作9个重塑土样,测其相关的参数值,以验证回归方程的适用性。结果表明,回归分析建立导热系数与2个物理参数之间的关系式不成立;考虑天然密度、含水率和孔隙度为自变量,其分别对应的相关性系数T检验显著值(Sig)都0. 05,复决定系数为0. 886,建立的回归方程成立,自变量能准确解释因变量的变化,且含水率与导热系数呈负相关,天然密度和孔隙度呈正相关。重塑土样相关参数代入回归方程得到的导热系数值与实验实测值之间相对误差低于4%,验证了该回归方程的普遍性和适用性。     

热屏障井对地下水源热泵换热影响模拟

对于场地受限的地下水源热泵项目,随着系统运行时间的增加易引发热贯通现象进而降低机组运行效率。地下水源热泵设计中,在抽灌水井连线间布设热屏障井可改变地下水流场,降低热量在抽灌井间的运移速度,有利于延长热贯通发生时间并缓解热贯通程度。通过构建地下水换热模型,模拟计算夏季制冷工况条件下36组热泵运行场景,分析了热屏障井的位置,过滤管长度及回灌量对热贯通和含水层温度场的影响规律。结果表明:热屏障井回灌量的增加有利于提升热屏障效果,但提升幅度随回灌量的增加逐渐减弱;最大水位降深值随着热屏障井回灌量的增加呈线性增长;增加热屏障井滤管长度可提升热屏障效果,提升效果随屏障井回灌量的增加逐渐增强。通过模型多周期、长时间模拟计算发现,热屏障井的运行可促使回灌的冷热量集中在回灌井一侧,对于采用冬夏季抽灌井交换运行模式的热泵系统,可充分利用含水层储能,提升机组运行效率。     

寒区渠基黏土热参数最优概率分布

为分析寒区渠基黏土热参数的随机分布特征及概率分布模型,以寒区渠基黏土的导热系数为样本,结合经典分布拟合法、多项式逼近法、最大熵法和正态信息扩散法,分别对寒区渠基黏土热参数的概率分布规律进行了研究。首先通过分析热参数的离散性,并比较概率分布曲线、拟合检验值和累计概率分布值,对不同方法描述热参数随机性的优劣进行了评价;然后,基于寒区渠基黏土热学参数对温度的敏感性,提出了一个可以达到理想拟合精度的寒区渠基黏土热参数概率推断的区间取值标准。研究结果表明：寒区渠基黏土的热参数具有随机变量的特征;正态信息扩散法可以描述热参数样本的随机波动性;在4种方法中,正态信息扩散法的拟合精度最高。使用3.5σ法,将[μ-3.5σ,μ+3.5σ]（μ为随机变量的均值,σ为标准差）作为概率函数推断时的取值区间,同时考虑偏度的影响,可使得累计概率值达到1.000 0的精度,能够较准确地推断热参数的概率分布函数。     

活动断裂带岩石的变形机制和摩擦性质—以圣·安德列斯断层为例

岩石的变形机制和力学性质对认识活动断裂带的孕震机制和发震过程都具有重要意义。圣·安德列斯（San Andreas）转换断层是太平洋板块与北美板块的构造边界,也是重要的地震活动带,总结了美国南加州地震中心对圣·安德列斯断层钻孔断层岩的研究进展。对断层泥的高速摩擦实验发现：动力弱化现象只在高速滑移时才发生,伴随着摩擦生热,岩石的摩擦系数显著降低。断层泥中富镁黏土矿物的富集可以显著降低断层的摩擦系数,促进蠕滑,黏土矿物的不均一分布可导致断裂带变形行为和地震分布的突变。与断层泥和碎裂岩不同,粉碎岩形成于快速传播地震的断裂端部,具高孔隙率和高渗透率,流体活动性强。此外,断层岩的有机质成熟度可用来追溯古地震造成的热异常。在川滇中国地震科学实验场开展科学钻探项目,研究断层岩样品的显微结构、物理性质和变形历史,以期为理解大陆汇聚与转换挤压过程中复杂的地震活动提供重要信息。     

An Operational Precipitable Water Vapor Retrieval Algorithm for Fengyun-2F/VISSR Using a Modified Three-Band Physical Split-Window Method

The Visible and Infrared Spin-Scan Radiometer(VISSR) onboard the Fengyun-2(FY-2) satellite can provide valuable thermal infrared observations to help create a precipitable water vapor(PWV) product with high spatial and temporal resolutions. The current FY-2/VISSR PWV product in operation is produced by using a traditional two-band physical split-window(PSW) method, which produces low quality results under dry atmospheric conditions. Based on the sensitivity characteristics of FY-2 F/VISSR water vapor channel and two split-window channels to atmospheric water vapor, this study developed a new, robust operational PWV retrieval algorithm for FY-2 F to improve the operational precision of the current PWV product. The algorithm uses a modified three-band PSW method, which adds a scale for the water vapor channel in the improved three-band PSW method. Integrated PWV products from the radiosonde data in 2016 are used here to validate the precision of the PWV retrieved by the modified three-band and traditional two-band PSW methods. The mean bias, root mean square error(RMSE), and correlation coefficient of the PWV retrieved by the modified three-band PSW method are 0.28 mm, 4.53 mm, and 0.969, respectively. The accuracy is much better than the PWV retrieved by the two-band method, whose mean bias, RMSE, and correlation coefficient are 12.67 mm, 29.35 mm, and 0.23. Especially, in mid-or high-latitude regions, the RMSE of the PWV is improved from 10 to 2 mm by changing the inversion in the two-band method to the modified three-band PSW method. Furthermore, the modified three-band PSW results show a better consistency with the radiosonde PWV at any zonal belt and season than the two-band PSW results. This new algorithm could significantly improve the quality of the current FY-2 F/VISSR PWV product, especially at sites where the actual PWV are lower than 15 mm.     

定量研究雅安地形坡向坡度对降水分布的影响

利用四川省雅安市30 m分辨率基础高程数据,提取栅格的坡向和坡度参数,将雅安307个区域自动站在2017年汛期(6—9月)共50次的降水天气个例,分为16次大尺度降水和34次中小尺度降水,使用对应时次的欧洲中心细网格0.25°×0.25°再分析风场资料,根据不同的站点地形高度将风场合成平均风场,和各站点地形的坡向和坡度计算出其动力抬升作用,同时使用当天日照和天文太阳辐射值来计算地形的热力抬升作用,与对应降水过程的降水分布进行多元线性回归,根据回归的标准系数的大小确定各自变量对降水分布的影响,得出以下结论:(1)中小尺度降水中,地形的热力抬升作用对降水分布的影响作用最大,其次是海拔高度,地形的动力抬升作用在三者中对降水分布的影响最小;(2)在大尺度降水中刚好相反,地形的动力抬升对降水的分布影响作用最大,海拔次之,热力抬升作用在三者中影响作用最小;(3)日降水量最大值的站点海拔高度基本位于1 000 m左右,与抬升凝结高度对应较好;(4)从长期的统计来看,地形的动力作用和地表的植被情况对降水分布的影响最大。在实际预报工作用,根据不同的降水类型,关注不同的动力和热力作用对于判断降水分布大值区的位置有较好的参考作用。