在基于数字填图系统的1：25万区域地质调查修测中前人地质资料的利用与数据采集

1：25万区域地质调查修测的核心任务是挖掘、利用前人资料和对前人资料的二次开发。在1：25万玉林市幅数字地质填图试点的过程中．总结出一套基于数字填图系统的前人地质资料利用与数据采集的工作方法。其工作流程和工作步骤可分为6个阶段：①前期准备阶段;②室内地质资料录八阶段;③野外数字地质调查阶段;④室内资料整理阶段;⑤图件编制阶段;⑥成果提交阶段。该工作方法与传统的地质调查方法相比,提高了地质调查的工作效率和质量,已基本上达到了在1：252万区调修测区推广应用的“实战性”要求。     

含铀物质对有机质生烃的实验研究

采用密闭容器水热模拟实验方法,考察含铀物质对有机质热解生烃过程的影响。对热模拟实验产物分析发现,在暗色泥岩和煤岩样品中加入含铀物质后,气态烃和液态烃的生烃量都有比较明显的增加。其中煤岩的气态烃产量平均增加值为34%,而泥岩样品平均增加值也达到了30%以上。液态烃产率分析表明,含铀矿物也促进了泥岩和煤岩的液态烃产率。从泥岩氯仿沥青‘A’族组成分析表明,加入催化剂后泥岩的饱和烃和芳烃在高温阶段具有规律性的明显增大的趋势,反映出非烃和沥青质,甚至不溶有机质向相对稳定的饱和烃转化以及芳烃随演化程度增加的高聚合作用。综合以上分析,认为放射性铀对油气生成具有氧化催化作用。     

SO4^2-改性铁铝复合层柱粘土的制备及其催化性能研究

由共聚法制得的铁铝复合交联剂交换钠基蒙脱石层间的水合钠离子,再经SO42-改性处理制备了铁铝复合层柱粘土固体超强酸催化剂.利用xRD、FT-IR和BET法对催化剂的结构进行了表征.以乙酸正丁酯的合成反应为探针反应对催化剂的活性进行了测试.通过正交实验确定了铁铝复合交联粘土SO42-改性最佳工艺条件.研究了催化剂对探针反应的选择性及重复使用情况.结果表明:在由实验确定的最佳改性工艺条件下,乙酸的转化率达92.2%,反应中无副产物产生,催化剂具有较好的重复使用性能.     

RTK技术在杭州湾跨海大桥桥位地形测绘中的应用

介绍了RTK技术在杭州湾跨海大桥桥位地形测绘中的应用,并对其定位结果进行了精度比较与分析,结果表明:RTK定位测量的点位精度可达厘米级,各点位之间不存在误差积累,与全站仪等测量手段取得的结果符合得较好,可以用来代替二三级导线控制测量和等外水准等测量方法;流动站与基准站的距离在10km范围以内时,应用RTK技术对近岸水下地形进行测量具有方便、快捷、精度高等特点,但当此距离超过10km时,其精度则难以保证。杭州湾跨海大桥施工时应用RTK技术进行定位、高程测量,可提高工作效率和成果的质量。     

一种新的波浪变形三维数值模式──0-1混合型边界元

为提高边界元法模拟三维波场波浪变形的数值计算精度,借鉴常数元和线性元剖分方式、波势函数及波势函数法向导数对单元节点设定的各自适应性,提出了一种新的单元剖分模式──0-1混合型边界元,以控制和减缓由于计算误差累计而造成的波浪数值计算上的“横向振动”,借此结合边界元法的分区模式可实现较大范围的波场线性波浪变形计算,并为时域内的波浪非线性变形计算提供时间步长的数值保证.     

A New Pursuit Mode of Nonlinear Wave Surface

The numerical mode of nonlinear wave transformation based on both the Laplace equation for water field and the Bemoulli equation for water surface is a kind of time-domain boundary problem with initial conditions. And the basis for establishing the numerical mode of nonlinear wave in time domain is to trace the position of wave free surface and to calculale the instantaneous surface height and surface potential function. This paper firstly utilizes the ‘0-1‘ combined BEM to separate the boundary by means of discretization of Green‘ s integral equation based on the Laplace equation, then separates the free surface of wave with FEM and derives the FEM equation of wave surface that satisfies the nonlinear boundary conditions. By jointly solving the above BEM and FEM equations, the wave potential and surface height could be obtained with iteration in time domain. Thus a new kind of nonlinear numerical mode is established for calculating wave transformation. The wave test in the numerical wave tank shows that the numerical simulation with this mode is of high accuracy.     

开展我国海洋区域地质调查势在必行

本文概述了建国以来我国海洋地质调查与研究工作取得的丰硕成果。论述区域地质调查在海洋地质基础工作和未来海洋开发中的战略意义,介绍了国内外海洋区域地质调查的现状,对开展这项调查的可行性条件,以及进行1/100万海洋区域地质调查的项目内容、技术方法和提交成果等提出了设想和建议。     

Virgin rock temperatures from well logs — accuracy analysis for some advanced inversion models

Temperature data from 18 measurement series obtained during logging of the Oseberg field in the northern North Sea are presented. Because the measurement series are taken at approximately the same depth, they should give identical temperatures after depth correction, and are suitable for assessing the performance of different models used to determine virgin rock temperatures from well log information.We have used this data set to test the properties of the different models given by Shen and Beck (1986). Although these models were built to simulate closely the thermal recovery of a well and are unbiased, the uncertainties in the temperature estimates when applied to real data are found to be no less than those from simpler (biased) models. This fact confirms the conclusion of Hermanrud (1989a) who showed that physical factors other than those presently accounted for significantly influence the thermal recovery of a borehole.