一种带自由面的三维船体贴体网络的数值生成

本文提出了一个生成自由面的三维船体贴体网格的数值方法。文中以静水面以上的船体型线作为描述非定常自由面的计算网格域，进一步完善了我们以往开发的无法考虑兴波与静水面以上的船体型线相互作用对船舶粘性流动影响的网格生成方法。静水面以上的初始自由面网格分别沿船面法线η及切线ζ方向的曲线长的指数进行分布，即可极方便地调节自由面在船面及静水面附近的网格间距，也保证了在数值离散三维Ｐｏｉｓｓｏｎ方程时具有相当好的收敛性。这种方法的特点是计算量相当小，尤其能极方便地控制网格在船面簿粘性层中及静水面附近的分布。以Ｓｅｒｉｅｓ６０船模作为计算算例，带自由面的网格分布是相当满意的     

对应分析方法在粤西水东湾动力沉积环境分析的应用

本文以粤西水东湾表层沉积物样品的粒度分布为基本数据,使用对应分析方法并结合地形与波流特征,分析了海湾动力沉积环境。分析结果表明,海湾现代沉积环境可划分为4个动力沉积区。     

聚类分析法在浅海水团分析中的应用及黄、东海变性水团的分析

本文引入变性水团概念,用聚类分析确定黄、东海浅海海域变性水团的边界及其变化。根据给定的标准进行聚类,确定了水团的个数、边界及混合区。 由聚类方法所得结果看出,在该海区中有八个变性水团。根据温、盐相对指标,将这些水团分为九种不同的特征。也可以把这些水团划分为三种盐度类型。在温—盐点聚图上,不同变性水团的温盐点,分布于一条曲线附近,它体现出逐级变性的特点。各变性水团的变化范围都很大,这说明该海区中水团变性强烈。在暖季中的增温降盐和冷季中的降温增盐,可认为是整个黄海和东海水体变性的特征。所有季节性水团都经历一个形成与消亡的过程。 文中讨论了变性水团和海洋环境的相互关系。水团变性是热力因素和动力因素共同作用而产生的。通过变性水团的分析,作者认为,在该海区水团的变性中,热力因素起着主要作用。变性水团界线的舌状分布与流向之间的关系是很明显的,可作为分析环流的旁证。最后描述了变性水团和底层中心渔场之间的关系。     

Zooplankton Feeding Ecology: Contents of Fecal Pellets of the Cyclopoid Copepods Oncaea venusta, Corycaeus amazonicus, Oithona plumifera, and O. simplex from the Northern Gulf of Mexico

Abstract. In situ feeding habits of the cyclopoid copepods Oncaea venusta, Corycaeus amazonicus, Oithona plumifera , and O. simplex were investigated by scanning electron microscope examination of fecal pellets, the contents of which reflected copepod gut contents upon capture. Peilet contents were compared with assemblages of phytoplankton present in surface waters at times of copepod collection. All samples were from the northern Gulf of Mexico. All four copepods fed upon phytoplankton and O. venusta also ingested other crustaceans. Dominant components of fecal pellets generally did not mirror those of available phytoplankton assemblages. In some cases, O. venusta ingested primarily larger-sized particles even when these were not most abundant, and in other cases it did not ingest large cells even when they were present in bloom concentrations. The presence of small (< 2–5 urn diameter) centric diatoms in O. venusta pellets suggests the possibility of feeding by mechanisms other than suspension or raptorial feeding. Limited observations suggest that C. amazonicus and O. plumifera may feed raptorially on larger particles even when these are not particularly abundant, and that the small O. simplex (< 500 nm total length) feeds mainly upon nanoplankton. It appears that cyclopoid feeding mechanisms are complex, and likely more so than those of many calanoids.     

日本海古海洋环境的演化

基于近年来有关日本海的古海洋古环境研究成果，总结概述了日本海中新世以来的古气候和古海洋环境演化特征。日本海作为西北太平洋一个主要的边缘海，在全球气候变化过程中起着重要的作用。它的古气候古环境演化，与全球其他地区一样受控于地球轨道参数的变化，同时也发育一些由气候的不稳定性、海峡的开合与其他一些地球气候系统的非线性活动所驱动的突发性快速气候变化事件。日本海的古海平面、古海水温度、古洋流等因子的变化还受到冰盖扩张和退缩、构造运动、冰川性地壳均衡补偿、东亚季风等因素的影响，具有鲜明的区域特点。总体说来，目前对日本海的研究程度还不高，对它在全球气候变化中的作用过程、驱动和响应机制的了解还很有限，需要进一步深入研究。     

雌雄比对海带雌配子体发育的影响

本实验进行了不同雌雄比对海带雌配子体发育的影响。结果表明：雌雄比(鲜重)为1：1及2：1，实验组出现排卵时间最早，且发育率高，实验第20天，发育率超过70％，孢子体正常。5：1，10：1，20：1实验组随着雄性比例的减少，发育率逐渐降低，随着培养天数的增加，三个实验组均出现未受精卵及畸形孢子体，雌雄比越大，未受精卵数目越多。     

Validation and Improvement of Satellite-Derived Surface Solar Radiation over the Northwestern Pacific Ocean

The purpose of this study is to validate and improve satellite-derived downward surface shortwave radiation (DSSR) over the northwestern Pacific Ocean using abundant in situ data. The DSSR derivation model used here assumes that the reduction of solar radiation by clouds is proportional to the product of satellite-measured albedo and a cloud attenuation coefficient. DSSR is calculated from Geostationary Meteorological Satellite-5/Visible Infrared Spin-Scan Radiometer data in 0.05° × 0.05° grids. The authors first compare the satellite DSSR derived with a cloud attenuation coefficient table determined in past research with in situ values. Although the hourly satellite DSSR agrees well with land in situ values in Japan, it has a bias of +13∼+34 W/m² over the ocean and the bias is especially large in the low latitudes. The authors then improve the coefficient table using the ocean in situ data. Usage of the new table successfully reduces the bias of the satellite DSSR over the ocean. The cloud attenuation coefficient for low-albedo cases over the ocean needs to be larger in the low latitudes than past research has indicated. Daily and hourly DSSR can be evaluated from the satellite data with RMS errors of 11–14% and 30–33%, respectively, over a wide region of the ocean by this model. It is also shown that the cloud attenuation coefficient over land needs to be smaller than over the ocean because the effect of the radiation reflected by the land surface cannot be ignored.     

In-Situ Observation of Fluid Mud in the North Passage of Yangtze Estuary, China

Observations of fluid mud were made in the lower North Passage of the Yangtze Estuary in February 2000, on 10 -11 August 2000, on 30 - 31 August 2000 (after two strong typhoons), on 21 - 24 August 2000 (neap tide) and on 3 -6 September 2000 (mean tide) respectively. In situ data show that the fluid mud in this area consists of fine cohesive sediment (median size 7.23 μm). The formation and movement of fluid mud varied during the neap-spring and flood-ebb tidal cycle. Observations suggest that fluid mud phenomena in this area may be categorised in a three-fold manner as slack water, storm and saltwedge features. The thickness of the fluid mud layer of slack water during the neap tide ranged from 0.2 to 0.96 m, whereas during the mean tide, the thickness ranged from 0.17 to 0.73 m, and the thickness of the fluid mud layer was larger during slack water than at the flood peak. Shoals cover an area of 800 km^2 with a water depth smaller than 5 m. Erosion of these extensive intertidal mudflats due to storm action provides an abundant sediment source. This is particularly significant in this estuary when the tidal level is lower than 5 m. The lower North Passage is a typical zone of saltwater wedging, so the saltwedge fluid mud has the most extensive spatial range in the estuary.     

杭州湾海域水体悬沙粒度统计分析

利用2000年9月在杭州湾进行的原型水文泥沙测验所获取的648个悬沙粒度样品,进行了样品粒度统计分析,结果表明:在杭州湾测验区域,粒径为4.00～20.20μm的悬沙出现频率最高;悬沙的中值粒径值自东向西迅速增大;北岸海域悬沙的中值粒径值大于南岸海域悬沙的中值粒径值。     

水产饲料膨化机设计刍论

据开发应用水产饲料膨化机实践，初步论述了膨化机生产能力与动力匹配，螺杆设计参数长径比，物料在腔内滞留时间，膨化腔设计及其温度调控，并提出改进设计的见解.