Treatment of high fluoride concentration wastewater by layered double hydroxides： Mechanism studies

An appropriate concentration of fluoride in drinking water is required to prevent dental cavities, but long-term ingestion of water that contains more than a suitable level of fluoride can cause bone disease and mottling of the teeth. Fluoride ions can be found in wastewater from the fluoride chemical industry, as well as the semiconductor, metal processing, fertilizer, and glass-manufacturing industries. The discharge standard for fluoride in industrial wastewater in China is 10 mg/L. Efficient treatment of fluoride-containing wastewater is therefore of major concern in China, following the rapid development of the fluoride chemical industry. Several methods have been used to remove fluoride from water, such as adsorption, chemical precipitation, electrodialysis, ion exchange and electrochemical processes. Layered double hydroxides （LDHs） are anionic clays with high anion exchange capacities which are effective adsorbents for removal of a variety of anionic pollutants. LDHs have been studied as potential adsorbents for removing toxic anionic species such as CrO4^2-, TcO4^-, SeO3^2-, pesticides, and anionic surfactants from aqueous systems. One of the main attractions of using LDHs for fluoride removal, is that unlike other chemical treatment methods, no chemical sludge should be produced. In the present study, an attempt was made to investigate the mechanism of fluoride removal by LDHs under different conditions using batch methods. In addition, the release of fluoride adsorbed on LDHs by treatment with an aqueous solution of Na2CO3 was studied. The residual fluoride was found to be 10 mg/L in a solution with an initial concentration of 1000 mg/L, which meets the discharge standard for fluoride in industrial wastewater in China.     

Carbonates calibrated against oceanographic parameters along a latitudinal transect in the Gulf of California, Mexico

Trophic resources are an important control governing carbonate production. Though this importance has long been recognized, no calibration exists to quantitatively compare biogenic assemblages within trophic resource fields. This study presents a field calibration of carbonate producers in a range of settings against high‐resolution in situ measurements of nutrients, temperature and salinity. With its latitudinal extent from 30° to 23° N, the Gulf of California, Mexico, spans the warm‐temperate realm and encompasses nutrient regimes from oligo‐mesotrophic in the south to eutrophic in the north. Accordingly, from south to north carbonates are characterized by: (i) coral‐dominated shallow carbonate factories (5–20 m water depth) with average sea‐surface temperatures of 25 °C (min. 18 °C, max. 31 °C), average salinities of 35·06‰ and average chlorophyll a levels, which are a proxy for nutrients, of 0·25 mg Chl a m^?3 (max. 0·48, min. 0·1). (ii) Red algal‐dominated subtidal to inner‐shelf carbonate formation (10–25 m) in the central Gulf of California exhibiting average temperatures of 23 °C (min. 18 °C, max. 30 °C), average salinities of 35·25‰, and average Chl a levels of 0·71 Chl a m^?3 (max. 5·62, min. 0). (iii) Molluskan bryozoan‐rich inner to outer shelf factories in the northern Gulf of California (20–50 m) with average sea surface temperatures of only 20 °C (min. 13 °C, max 29 °C), average salinities of 35·01‰, and average contents of 2·2 mg Chl a m^?3 (max. 8·38, min. 0). By calibrating sedimentological data with in situ measured oceanographic information in different environments, the response of carbonate producers to environmental parameters was established and extrapolated to carbonates on a global scale. The results demonstrate the importance of recognizing and quantifying trophic resources as a dominant control determining the biogenic composition and facies character of both modern and fossil carbonates.     

Hydrology and hydrogeology of Sakaryabaşı Karstic springs, Çifteler, Turkey

The Sakarya River is one of the largest rivers in Turkey and is fed mainly from Sakaryabaşı springs. The Sakaryabaşı springs are located in the Central Anatolia and issue from confined/semi-confined karst having a thermal component and therefore, having quite different hydrogeological characteristics as compared to the Taurus Karst region, a typical example of the Mediterranean type of karst. The karstic carbonate rocks that form the groundwater reservoir are overlain by a thick semi-pervious overburden of mainly clastics of Neogene age. Tectonics is the major factor controlling the occurrence of the karst springs in the area where topography is rather flat. This study aimed at explaining the occurrence and movement of the karst groundwater within the system by use of hydrogeological, chemical, and isotopic tools. Isotopic composition of the waters revealed that all waters in the region are of meteoric origin and the thermal component is due to deep circulation. The catchment area of the hydrogeological system extends to the south and groundwater movement is towards the outlets, which are in a depression along a major fault. The movement of the groundwater, based on analysis of remotely sensed images, is controlled mainly by structural elements.     

Correlations in aftershock and seismicity patterns

Correlations in space and time play a fundamental role in earthquake processes. One direct manifestation of the effects of correlations is the occurrence of aftershocks due to the stress transfer in the vicinity of a main shock. Less obvious and more speculative changes in correlations may occur in the background seismicity before large earthquakes. Using statistical physics it is possible to introduce a measure of spatial correlations through a correlation length. This quantity characterizes how local fluctuations can influence the occurrence of earthquakes over distances comparable with the correlation length. In this work, the physical basis of spatial correlations of earthquakes is discussed in the context of critical phenomena and the percolation problem. The method of two-point correlation function is applied to the seismicity of California. Well defined variations in time of the correlation length are found for aftershock sequences and background seismicity. The scaling properties of our obtained distributions are analyzed with respect to changes in several scaling parameters such as lower magnitude cutoff of earthquakes, the maximum time interval between earthquakes, and the spatial size of the area considered. This scaling behavior can be described in a unified manner by utilizing the multifractal fit. Utilizing the percolation approach the time evolution of clusters of earthquakes is studied with the correlation length defined in terms of the radius of gyration of clusters. This method is applied to the seismicity of California.     

Seismic activity associated with the subducting motion of the Philippine Sea plate beneath the Kanto district, Japan

The Pacific plate and the Philippine Sea plate overlap and subduct underneath the Kanto region, central Japan, causing complex seismic activities in the upper mantle. In this research, we used a map selection tool with a graphic display to create a data set for earthquakes caused by the subducting motion of the Philippine Sea plate that are easily determined. As a result, we determined that there are at least four earthquake groups present in the upper mantle above the Pacific plate. Major seismic activity (Group 1) has been observed throughout the Kanto region and is considered to originate in the uppermost part of mantle in the subducted Philippine Sea plate, judging from the formation of the focal region and comparison with the 3D structure of seismic velocity. The focal mechanism of these earthquakes is characterized by the down-dip compression. A second earthquake layer characterized by down-dip extension (Group 2), below the earthquakes in this group, is also noted. The focal region for those earthquakes is considered to be located at the lower part of the slab mantle, and the Pacific plate located directly below is considered to influence the activity. Earthquakes located at the shallowest part (Group 3) form a few clusters distributed directly above the Group 1 focal region. Judging from the characteristics of later phases in these earthquakes and comparing against the 3D structure of seismic velocity, the focal regions for the earthquakes are considered to be located near the upper surface of the slab. Another earthquake group (Group 4) originates further below Group 2; it is difficult to consider these earthquakes within a single slab. The seismic activities representing the upper area of the Philippine Sea plate are Group 3. This paper proposes a slab geometry model that is substantially different from conventional models by strictly differentiating the groups.     

Effects of magnetic interactions in anisotropy of magnetic susceptibility: Models, experiments and implications for igneous rock fabrics quantification

Besides granites of the ilmenite series, in which the anisotropy of magnetic susceptibility (AMS) is mainly controlled by paramagnetic minerals, the AMS of igneous rocks is commonly interpreted as the result of the shape-preferred orientation of unequant ferromagnetic grains. In a few instances, the anisotropy due to the distribution of ferromagnetic grains, irrespective of their shape, has also been proposed as an important AMS source. Former analytical models that consider infinite geometry of identical and uniformly magnetized and coaxial particles confirm that shape fabric may be overcome by dipolar contributions if neighboring grains are close enough to each other to magnetically interact. On these bases we present and experimentally validate a two-grain macroscopic numerical model in which each grain carries its own magnetic anisotropy, volume, orientation and location in space. Compared with analytical predictions and available experiments, our results allow to list and quantify the factors that affect the effects of magnetic interactions. In particular, we discuss the effects of (i) the infinite geometry used in the analytical models, (ii) the intrinsic shape anisotropy of the grains, (iii) the relative orientation in space of the grains, and (iv) the spatial distribution of grains with a particular focus on the inter-grain distance distribution. Using documented case studies, these findings are summarized and discussed in the framework of the generalized total AMS tensor recently introduced by Cañon-Tapia (Cañon-Tapia, E., 2001. Factors affecting the relative importance of shape and distribution anisotropy in rocks: theory and experiments. Tectonophysics, 340, 117–131.). The most important result of our work is that analytical models far overestimate the role of magnetic interaction in rock fabric quantification. Considering natural rocks as an assemblage of interacting and non-interacting grains, and that the effects of interaction are reduced by (i) the finite geometry of the interacting clusters, (ii) the relative orientation between interacting grains, (iii) their heterogeneity in orientation, shape and bulk susceptibility, and (iv) their inter-distance distribution, we reconcile analytical models and experiments with real case studies that minimize the role of magnetic interaction onto the measured AMS. Limitations of our results are discussed and guidelines are provided for the use of AMS in geological interpretation of igneous rock fabrics where magnetic interactions are likely to occur.     

Modèles géostatistiques de concentrations ou de débits le long des cours d'eau

Estimating concentrations or flow rates along a stream network requires specific models. Two classes of models, recently proposed in the literature, are generalized, to the intrinsic case in particular. We present a global construction by ‘streams’, i.e. on the whole set of paths between sources and outlet. Combining stationary or intrinsic one-dimensional random functions leads to stationary or intrinsic models on segments, with discontinuities at the forks. A construction from outlet to sources, leads to stationary or intrinsic models on each stream, without any discontinuity at the forks. The linear variogram is found as a particular case. The extension to the linear model of coregionalization is immediate, allowing a multivariate modelling of concentrations. To cite this article: C. de Fouquet, C. Bernard-Michel, C. R. Geoscience 338 (2006).     

Water temperature behaviour in the River Loire since 1976 and 1881

Analysis of monthly mean river temperatures, recorded on an hourly basis in the middle reaches of the Loire since 1976, allows reconstruction by multiple linear regression of the annual, spring and summer water temperatures from equivalent information on air temperatures and river discharge. Since 1881, the average annual and summer temperatures of the Loire have risen by approximately 0.8?°C, this increase accelerating since the late 1980s due to the rise in air temperature and also to lower discharge rates. In addition, the thermal regime in the Orleans to Blois reach is considerably affected by the inflow of groundwater from the Calcaires de Beauce aquifer, as shown by the summer energy balance. To cite this article: F. Moatar, J. Gailhard, C. R. Geoscience 338 (2006).     

汽车底盘技术在HGY-1500型钻机中的应用

在HGY-1500型钻机的设计中应用汽车底盘技术，选用汽车变速器、离合器等零部件；钻机分动箱采用斜齿圆柱齿轮传动，使用接合套式换挡装置进行换挡，提高了钻机工作的可靠性，降低了生产成本，减轻了钻机质量，操作轻松、方便。     

山区生态县区域协调发展的机制构建--以粤北始兴县为例

区域协调机制在不同类型地域和一种类型地域的不同的发展阶段是不同的。始兴县作为一个典型的山区生态县,工业进入加速发展时期,在此经济发展阶段的区域协调问题主要表现在:与外部区域经济、社会发展差距拉大,工业化与流域生态环境保护的矛盾已开始凸现,县政府协调区域发展的财政能力较低,区域协调机制不健全等。由此对始兴县的区域协调机制进行建构:建立健全多层次的区域协调机构;加大纵向和横向政府财政转移支付的力度;加强与相邻相关地区的协调;实施区域空间管治协调,保护城乡生态环境;科学合理选择产业,大力发展循环经济;全县推行绿色GDP考核等。