混凝土徐变对抗滑桩结构的影响分析

混凝土徐变作用能够增大桩身弯曲变形,占用设计冗余。增大受拉侧混凝土裂缝宽度,降低结构耐久性。由于抗滑桩嵌固段属于隐蔽工程,无法及时发现此类问题,故将会对防治工程造成安全隐患。本文采用在抗滑桩埋设应变计,定期监测桩身应变数值的方法,研究了悬臂式抗滑桩在成桩后至一定时期内的实际受力变形情况。特别是对工程运行初期混凝土徐变作用下的桩身变形情况,进行了分析与总结,最后提出了抗滑桩设计时注意事项。     

Integration schemes with substepping algorithms for creep analysis in geomaterials

This paper describes a robust and efficient methodology for predicting displacements, deformations, and stresses in geomaterials that are susceptible to creep. The methodology is based on two integration schemes, which consider substepping algorithms. The first scheme is used for integrating space-time relations in a global sense, whereas the second scheme is used for integrating stress-stain relations in a local sense. Different from previous studies, both integration schemes are easy to implement and general in the sense that they can be applied to any type of creep law. Through an in-house finite element simulator, several numerical tests are performed. They include triaxial and wellbore closure analyses considering soft soils and salt rocks. The results show that the combination of both schemes leads to stable and accurate solutions with reduced computational time.     

Modelling the time‐dependent behaviour of granular material with hypoplasticity

This paper presents a constitutive model for time‐dependent behaviour of granular material. The model consists of 2 parts representing the inviscid and viscous behaviour of granular materials. The inviscid part is a rate‐independent hypoplastic constitutive model. The viscous part is represented by a rheological model, which contains a high‐order term denoting the strain acceleration. The proposed model is validated by simulating some element tests on granular soils. Our model is able to model not only the non‐isotach behaviour but also the 3 creep stages, namely, primary, secondary, and tertiary creep, in a unified way.     

下滑坡及防治方案

下滑坡是由采煤引发的巨型深层顺层滑坡,目前处在蠕动变形阶段。本文对滑坡稳定性进行了计算,算出不同采空区面积下的稳定系数,计算了滑坡推力,提出了地表地下排水、煤层采空区设承重阻滑键、滑坡前缘设抗滑桩综合防治方案,可供防治设计施工参考。     

Rheological stratification of the Indian continental lithosphere: Role of diffusion creep

Dynamic recrystallization and reduction in grain-size at large strains, e.g. in shear zones, leads to rheological weakening of the lithosphere and facilitates intense ductile deformation. In the present work, we include this effect into the rheological models of the Indian continental lithosphere to analyse its role in modifying the rheological structure and strength of the Indian lithosphere. The results computed by using quartz and felspar rheologies for the upper and lower crust, respectively, and grain-size dependent olivine rheology for the upper mantle, indicate an increase in the ductility of the mantle lithosphere.     

Settlement‐time behaviour of granular embankments

Creep settlements are the main cause of deterioration of road pavement and impervious elements of dams, and therefore a method to calculate them is needed. Viscoelastic models (e.g. the standard linear solid) have been chosen to represent the creep of granular materials (Figure 1). Finite element calculations show that quasi‐oedometric conditions exist near the centre of embankments. Explicit expressions for one‐dimensional viscoelastic settlements of an embankment during and after construction have been obtained for any loading law and drawn for a linear load. The three viscoelastic parameters, E_o, R_c and T_r can be determined through laboratory or field testing, and the results can be adjusted by using settlement records. Good agreement has been found between measured and calculated settlements at several dams. Copyright © 2000 John Wiley & Sons, Ltd.     

SPATIAL AND TEMPORAL DISTRIBUTION OF SLIP RATE DEFICIT ACROSS HAIYUAN-LIUPAN SHAN FAULT ZONE CONSTRAINED BY GPS DATA

As the northeast boundary of the Tibetan plateau, the Haiyuan-Liupan Shan fault zone has separated the intensely tectonic deformed Tibetan plateau from the stable blocks of Ordos and Alxa since Cenozoic era. It is an active fault with high seismic risk in the west of mainland China. Using geology and geodetic techniques, previous studies have obtained the long-term slip rate across the Haiyuan-Liupan Shan fault zone. However, the detailed locking result and slip rate deficit across this fault zone are scarce. After the 2008 Wenchuan M_S8.0 earthquake, the tectonic stress field of Longmen Shan Fault and its vicinity was changed, which suggests that the crustal movement and potential seismic risk of Haiyuan-Liupan Shan fault zone should be investigated necessarily. Utilizing GPS horizontal velocities observed before and after Wenchuan earthquake(1999~2007 and 2009~2014), the spatial and temporal distributions of locking and slip rate deficit across the Haiyuan-Liupan Shan fault zone are inferred. In our model, we assume that the crustal deformation is caused by block rotation, horizontal strain rate within block and locking on block-bounding faults. The inversion results suggest that the Haiyuan fault zone has a left-lateral strike-slip rate deficit, the northern section of Liupan Shan has a thrust dip-slip rate deficit, while the southern section has a normal dip-slip rate deficit. The locking depths of Maomao Shan and west section of Laohu Shan are 25km during two periods, and the maximum left-lateral slip rate deficit is 6mm/a. The locking depths of east section of Laohu Shan and Haiyuan segment are shallow, and creep slip dominates them presently, which indicates that these sections are in the postseismic relaxation process of the 1920 Haiyuan earthquake. The Liupan Shan Fault has a locking depth of 35km with a maximum dip-slip rate deficit of 2mm/a. After the Wenchuan earthquake, the high slip rate deficit across Liupan Shan Fault migrated from its middle to northern section, and the range decreased, while its southern section had a normal-slip rate deficit. Our results show that the Maomao Shan Fault and west section of Laohu Shan Fault could accumulate strain rapidly and these sections are within the Tianzhu seismic gap. Although the Liupan Shan Fault accumulates strain slowly, a long time has been passed since last large earthquake, and it has accumulated high strain energy possibly. Therefore, the potential seismic risks of these segments are significantly high compared to other segments along the Haiyuan-Liupan Shan fault zone.     

冻融循环下花岗岩剪切蠕变试验与模型研究

为探讨冻融对寒区工程岩石剪切蠕变特性的影响,以吉林省辉白隧道花岗岩为研究对象,对经历不同冻融循环次数的试样开展细观特征分析和剪切蠕变试验。试验结果表明：（1）随着冻融次数的增加,试样裂隙、孔隙不断扩展,岩石表面损伤现象愈发明显;（2）试样主要以中小孔隙为主,孔隙度随着冻融次数的增加呈非线性增长趋势;（3）随着冻融循环次数增加,蠕变变形量和蠕变速率逐渐增大,而蠕变时长、破坏应力和长期强度均呈现明显降低趋势。根据试验结果,进行冻融岩石非定常蠕变参数的表达,提出了冻融岩石损伤黏性元件,构建了花岗岩冻融剪切蠕变本构模型。将蠕变试验曲线和理论模型拟合曲线进行对比,验证了模型的正确性和适用性。通过对蠕变参数进行敏感性分析,研究了其对花岗岩蠕变变形的影响,并给出了蠕变参数随冻融循环次数的变化规律。该研究结果对于寒区岩体工程长期稳定性评价具有指导意义。     

一种横观各向同性岩体蠕变模型

层状岩体由于层理面或者结构面的存在,在力学上具有横观各向同性的特点,现有的各向同性蠕变模型难以全面反映横观各向同性岩体的蠕变力学特性。为构建能够反映横观各向同性岩体的三维蠕变模型,以能反映瞬时应变、减速蠕变和稳态蠕变特征的黏弹性Burgers模型为基础,基于常泊松比假定,在三维各向同性蠕变本构方程的基础上,按照算子替换的方法,将横观各向同性柔度矩阵代替各向同性柔度矩阵,并考虑了平行和垂直层理方向岩体蠕变力学行为的差异性,推导了横观各向同性岩体的三维蠕变本构方程。根据本构方程的特点,提出了根据平行和垂直方向岩体蠕变试验结果进行三维蠕变本构模型中蠕变参数的辨识方法。将提出的模型应用于三轴蠕变试验参数辨识,从而获得了一套完整的三维蠕变参数,并与试验结果进行对比分析,从而验证了所提模型与方法的合理性和有效性。进一步,指出了传统蠕变试验设计方案的局限性,给出了横观各向同性材料蠕变试验设计建议。研究成果为研究岩体三维蠕变机制提供了新思路,可对岩体蠕变试验设计提供相应的科研支撑。     

Talus slope geomorphology investigated at multiple time scales from high-resolution topographic surveys and historical aerial photographs (Sanetsch Pass,Switzerland)

Talus slopes are common places for debris storage in high-mountain environments and form an important step in the alpine sediment cascade. To understand slope instabilities and sediment transfers, detailed investigations of talus slope geomorphology are needed. Therefore, this study presents a detailed analysis of a talus slope on Col du Sanetsch (Swiss Alps), which is investigated at multiple time scales using high-resolution topographic (HRT) surveys and historical aerial photographs. HRT surveys were collected during three consecutive summers (2017–2019), using uncrewed aerial vehicle (UAV) and terrestrial laser scanning (TLS) measurements. To date, very few studies exist that use HRT methods on talus slopes, especially to the extent of our study area (2 km²). Data acquisition from ground control and in situ field observations is challenging on a talus slope due to the steep terrain (30–37°) and high surface roughness. This results in a poor spatial distribution of ground control points (GCPs), causing unwanted deformation of up to 2 m in the gathered UAV-derived HRT data. The co-alignment of UAV imagery from different survey dates improved this deformation significantly, as validated by the TLS data. Sediment transfer is dominated by small-scale but widespread snow push processes. Pre-existing debris flow channels are prone to erosion and redeposition of material within the channel. A debris flow event of high magnitude occurred in the summer of 2019, as a result of several convective thunderstorms. While low-magnitude (<5,000 m³) debris flow events are frequent throughout the historical record with a return period of 10–20 years, this 2019 event exceeded all historical debris flow events since 1946 in both extent and volume. Future climate predictions show an increase of such intense precipitation events in the region, potentially altering the frequency of debris flows in the study area and changing the dominant geomorphic process which are active on such talus slopes. © 2020 John Wiley & Sons, Ltd.