Chloride transfer in cement‐based materials. Part 1. Theoretical basis and modelling

In this first part of the work, we develop macroscopic models for migration and diffusion–migration of ionic species in saturated porous media, based on periodic homogenization. The prior application is chloride transport in cementitious materials. The dimensional analysis of Nernst–Planck equation lets appear to dimensionless numbers characterizing the ionic transfer in the porous medium. Using experimental data obtained from electrodiffusion tests on cement‐based materials (Part II), these dimensionless numbers are linked to the perturbation parameter ?. For a strong imposed electrical field, the asymptotic expansion of Nernst–Planck equation leads to a macroscopic model where the migration is predominant. For a weak imposed electrical field or in natural diffusion, we obtain a macroscopic model coupling diffusion and migration at the same order. In both models, the expression of the homogenized diffusion tensor is identical and only involves the geometric properties of the material microstructure. Copyright © 2012 John Wiley & Sons, Ltd.     

Failure and size effect for notched and unnotched concrete beams

Modelling failure in geomaterials, concrete or other quasi‐brittle materials and proper accounting for size effect, geometry and boundary effects are still pending issues. Regularised failure models are capable of describing size effect on specimens with a specific geometry, but extrapolations to other geometries are rare, mostly because experimental data presenting size effect for different geometries and for the same material are lacking. Three‐point bending fracture tests of geometrically similar notched and unnotched specimens are presented. The experimental results are compared with numerical simulations performed with an integral‐type non‐local model. Comparisons illustrate the shortcomings of this classical formulation, which fails to describe size effect over the investigated range of geometries and sizes. Finally, experimental results are also compared with the universal size effect law. Copyright © 2013 John Wiley & Sons, Ltd.     

The intrinsic permeability of microcracks in porous solids: Analytical models and Lattice Boltzmann simulations

The paper presents a synthesis of analytical modeling and computational simulations of the intrinsic permeability of microcracks, embedded in porous materials taking into account the interaction of the fluid flow in the microcrack with the surrounding porous material. In the first part of the paper, using the DARCY , STOKES , BRINKMAN , and the BEAVERS–JOSEPH approximations, we derive the intrinsic permeability of a plain non‐rough microcrack in terms of the microcrack geometry and the permeability of the porous material surrounding the microcrack. In the second part of the paper, the intrinsic permeability of a microcrack is determined by means of computational simulations using the framework of the lattice Boltzmann method with partial bounceback conditions. The comparison of predictions from the analytical model and the numerical simulations show an excellent agreement. Copyright © 2017 John Wiley & Sons, Ltd.     

Second‐order work analysis for granular materials using a multiscale approach

It has been established that the second‐order work criterion is a general necessary condition for all instabilities by divergence in rate‐independent granular materials. The relation between the values of discrete second‐order work at the intergranular contact point level and its global macroscopic value is recalled at the beginning of this paper. Then, the basic purpose of the paper is tackled by an analysis of the main features of second‐order work criterion in relation with the granular microstructure. For that, it is considered a novel micromechanical model (the so‐called ‘H‐microdirectional model’), which has the property to involve three scales: grain scale, mesoscale with a specific granular configuration and continuum mechanics macroscale. Eventually, these exhibited features (a bifurcation stress domain and some instability cones) are qualitatively compared with the ones provided by direct numerical simulations issued from a discrete element model. The ultimate goal is to analyse what happens at the granular scale, when the macrosecond‐order work is vanishing at the macrolevel. Copyright © 2013 John Wiley & Sons, Ltd.     

循环冻融下寒区工程常用保温材料性能变化试验研究北大核心CSCD

保温材料广泛应用于寒区工程的诸多领域。然而,在服役过程中,保温材料往往会受到浸水、冻融和盐蚀等多场耦合的循环作用,导致其保温、防水和强度等物理力学性能出现不同程度的退化。目前,保温材料的类型非常多,但其性能和耐久性有所不同,因此科学合理地选择保温材料不仅关系到其长期保温效果,同时对于工程构筑物的长期稳定性具有重要的意义。针对循环冻融作用,选取寒区工程中常用的4种保温材料[聚酚醛(FLK)、聚氨酯(PU)、聚苯乙烯挤塑板(XPS)和聚苯乙烯发泡板(EPS)]开展了浸纯水、浸盐水和干燥状态下的室内冻融循环试验,对经历了不同冻融次数的样品进行了表观密度、吸水率、导热系数、压缩强度、弯曲强度和微观结构系列测试。结果表明:浸润作用对保温材料物理力学性质影响显著,亲水性材料FLK的保温和力学性能退化显著,而憎水性材料PU、XPS和EPS变化相对较小。干燥条件下,冻融循环作用对FLK、XPS和EPS吸水率以及FLK的导热系数影响量值可观,但对4种保温材料的压缩和弯曲强度影响不大。浸纯水和盐水条件下,经历30次冻融循环后,FLK的导热系数增加约50%,弯曲强度降低超过0.3%,EPS的压缩强度降低超过10%。浸盐水后保温材料经历冻融循环作用后其物理力学性能退化程度与浸纯水条件下有所不同,该差异值得关注。通过扫描电镜图像能够识别4种保温材料的孔隙尺寸、孔隙致密度和固体颗粒胶结方式,但对经历冻融循环作用后的变化难以识别和量化。基于试验结果,结合寒区交通工程应用场景,分析了4种保温材料的冻融耐久性,以期服务于寒区交通工程保温材料的合理应用。     

HTD-3型高温堵漏材料研制及性能评价

深海钻探往往伴随着高温、高压,对钻井用堵漏材料提出了新的要求。首先通过对颗粒状、纤维状和片状堵漏材料的耐高温筛选,制作了HTD-3型高温堵漏材料。然后使用DL-3A型高温堵漏评价仪器对该堵漏材料的抗温、承压和封堵性能进行了测试,利用SEM电镜扫描对堵漏材料架桥情况进行了观察和分析,最后以5%梯度浓度进行了配伍性实验。测试结果表明,HTD-3型高温堵漏材料除对钻井液密度影响稍大外,对钻井液其他基本性能影响较小,在该材料中,不同级配的颗粒状材料完成了架桥,纤维状和片状材料完成了充填,形成了强度较高的封堵墙。通过实验证明：HTD-3型高温堵漏材料不仅有着较好的抗温、承压能力,还有较好的封堵效果。HTD-3型高温堵漏材料的研制为未来深海钻探堵漏提供了一种可行的选择。     

MICP技术联合多孔硅吸附材料对锌铅复合污染土固化/稳定化修复的试验研究

近年来,工业和科技的快速发展使得重金属污染土固化/稳定化的修复研究成为热点。运用微生物诱导碳酸钙沉淀(MICP)技术联合吸附材料对锌铅复合重金属污染土进行固化/稳定化的修复,通过无侧限抗压强度试验、毒性浸出试验,评价处理前后污染土的固化效果与重金属的稳定化效果,结合扫描电镜(SEM)和X射线衍射(XRD)等检测手段,揭示MICP技术处理锌铅重金属污染土的修复机制。研究结果表明,采用MICP技术对锌铅重金属污染土进行固化/稳定化之后,可以有效降低污染土中有害重金属的浸出性。当矿化时间为10d时,试样无侧限抗压强度为942.5k Pa;铅的浸出浓度为4.20mg/L,比未处理时降低了44.81%;锌的浸出浓度为4.31mg/L,比未处理时降低了46.19%,效果显著。在此基础上,添加10%的多孔硅吸附材料后,试样无侧限抗压强度可达到1 021 kPa,强度提高了8.3%;铅的浸出浓度为2.45mg/L,与未经处理时相比,降幅达到了67.81%,与单纯MICP方法处理时相比,铅浸出浓度被二次降低了41.67%;锌的浸出浓度仅为2.93 mg/L,与未经处理时相比,降幅达到了63.4%,与单纯...     

Development of Synthetic Clinopyroxene Reference Materials for In Situ Lithium Isotope Measurement by LA-MC-ICP-MS

The isotopic composition of lithium (Li) in clinopyroxene (Cpx), determined via in situ micro-analysis, has been employed as a potential geochemical tool for studying various geological processes such as crust-mantle recycling, silicate weathering and fluid-rock interaction. To obtain precise and accurate Li isotopic compositions in Cpx by LA-MC-ICP-MS, synthetic Cpx matrix-matched reference materials (RMs) were prepared in this study. Six Cpx-matrix RMs were prepared by mixing metallic oxides with GSP-2 (granodiorite) or pure L-SVEC solution and melting them into glasses (GSP-2 + oxide; L-SVEC + oxide). Two representative synthetic glasses, CPXA01 and CPXB01, were subjected to a series of analyses to investigate the possible qualification of the RMs for in situ Li isotope measurement by LA-MC-ICP-MS, including elemental homogeneity analysis (elemental mapping analysis and spot analysis), Li isotopic homogeneity analysis and accurate Li isotopic determination. The applicability of the synthetic Cpx-matrix RMs was highlighted by comparing the δ⁷Li values of three natural Cpx calibrated against the synthetic Cpx-matrix RMs and other commonly used RMs with different matrices (NIST SRM 612, BCR-2G, GOR128-G, StHs6/80-G, KL2-G and T1-G), respectively. Additionally, CPXB01-05 RMs with the same matrix but different Li contents were prepared to explore the Li content mismatch effect, which is significant for accurate determination of in situ Li isotopic composition by LA-MC-ICP-MS. The results of the cross-calibration of Li isotopes in CPXA01 and CPXB01 suggested no obvious Li isotopic fractionation between the two types of glasses (GSP-2 + oxide; L-SVEC + oxide). Thus, the two methods of producing Cpx-matrix RMs are suitable for preparing the matrix-matched RMs for in situ microanalysis for Li isotopes.     

Production of Bauxite Certified Reference Material (BARC-B1201) for Nine Property Values (Al2O3, Fe2O3, SiO2, TiO2, V2O5, MnO,Cr2O3, MgO and LOI) Traceable to SI Units

The National Centre for Compositional Characterisation of Materials (NCCCM) / Bhabha Atomic Research Centre (BARC) and National Aluminium Company Limited (NALCO), India have produced an Indian origin bauxite certified reference material (CRM), referred to as BARC-B1201, certified for major (Al₂O₃, Fe₂O₃, SiO₂, TiO₂, loss on ignition - LOI) and trace contents (V₂O₅, MnO, Cr₂O₃, MgO). Characterisation was undertaken by strict adherence to ISO Guides. A method previously developed and validated in our laboratory, using single step bauxite dissolution and subsequent quantitation (of Al₂O₃, Fe₂O₃, SiO₂, TiO₂, V₂O_5, MnO, Cr₂O₃ and MgO) by ICP-AES (SSBD ICP-AES) was used for homogeneity studies and an inter-laboratory comparison exercise (ILCE) of the candidate CRM. LOI was determined by thermo-gravimetric analysis. Property values were assigned after an ILCE with participation from seventeen reputed government and private sector laboratories in India. The CRM was certified for nine property values: Al₂O₃, Fe₂O₃, SiO₂, TiO₂, V₂O_5, MnO, Cr₂O₃, MgO and LOI, which are traceable to SI units.     

Characterisation of Three Sri Lankan Zircon Megacrysts as Potential Reference Materials for Microbeam U-Pb Geochronology and Hf-O-Zr Isotope Measurements

In situ U-Pb geochronology and hafnium, oxygen and zirconium isotope measurements in zircons using laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) and ion microprobe techniques can provide essential isotopic data to constrain geological evolutionary histories. Developing reliable zircon reference materials is the cornerstone for in situ zircon chronology and isotopic studies. In this study, the homogeneity of U-Pb ages and Hf-O-Zr isotope ratios in three Sri Lankan zircon megacrysts (SLZA, SLZB and SLZC) were investigated using multiple analytical methods. The obtained U, Th, Pb and Hf mass fractions of the SLZA zircon were 839 ± 56 μg g^-1 (1s), 151 ± 15 μg g^-1 (1s), 198 ± 28 μg g^-1 (1s) and 8635 ± 286 μg g^-1 (1s), respectively. The mass fractions of U, Th, Pb and Hf in the SLZB zircon were 1106 ± 106 μg g^-1 (1s), 331 ± 61 μg g^-1 (1s), 376 ± 57 μg g^-1 (1s) and 9673 ± 976 μg g^-1 (1s), respectively. The U, Th, Pb and Hf mass fractions determined in the SLZC zircon were 551 ± 35 μg g^-1 (1s), 111 ± 8 μg g^-1 (1s), 129 ± 18 μg g^-1 (1s) and 7881 ± 393 μg g^-1 (1s), respectively. The chemical abrasion isotope dilution thermal ionisation mass-spectrometry (CA-ID-TIMS) method yielded a Th-corrected weighted mean ²⁰⁶Pb/²³⁸U age of 556.94 ± 1.29 Ma (95% conf., n = 5) for the SLZA zircon, 552.90 ± 1.29 Ma (95% conf., n = 7) for the SLZB zircon and 560.83 ± 1.29 Ma (95% conf., n = 7) for the SLZC zircon. The obtained Hf isotopic compositions of the SLZA, SLZB and SLZC zircons determined with the solution MC-ICP-MS method were 0.281651 ± 0.000014 (2s, n = 10), 0.281704 ± 0.000008 (2s, n = 10) and 0.281676 ± 0.000006 (2s, n = 10), respectively. The obtained O isotopes of the SLZA and SLZB zircons measured with the laser fluorination method were 12.14 ± 0.56‰ (2s, n = 4) and 11.91 ± 0.30‰ (2s, n = 4), respectively. The Zr isotopes of the SLZA, SLZB and SLZC zircons determined with double spike TIMS analysis yielded mean δ⁹⁴/⁹⁰Zr_SRM3169 values of -0.03 ± 0.06‰ (2s, n = 10), -0.03 ± 0.04‰ (2s, n = 10) and 0.00 ± 0.07‰ (2s, n = 8), respectively. The SLZA zircon can be used as a primary reference or quality control material for microbeam U-Pb, Hf and Zr isotope measurements because of its slight heterogeneity. The U-Pb, Hf and Zr isotopic compositions of the SLZB and SLZC megacrysts were homogeneous. The O isotopic compositions in the SLZA and SLZB zircon were slightly dispersed, indicating that these two megacrysts can only serve as secondary reference materials for microbeam O isotope measurements.