Carbonate aeolianites of western Saurashtra,India: experimental decipherment of the depositional mechanisms

Granular carbonate deposits of Late Pleistocene to Early Holocene age, commonly referred to as ‘miliolite limestone’, occur in a linear belt, parallel to the southern coast of Saurashtra, India. In the present study area these carbonate deposits are found in select valleys between ridges and mounds of pyroclastic material present in the Deccan trap plateau. Two different depositional histories have been proposed for these sediments. The presence of marine bioclasts led to the postulation of a marine origin for these deposits. The second school of thought propounded redeposition of the coastal sediments by aeolian processes. Although a few features could not be explained by the proposed aeolian model, critical comparison of these two views favoured the aeolian origin. The mode of occurrence, lithological and structural attributes, and microscopic evidence presented here, also support a possible aeolian origin for these deposits. Experimental observation indicates that these carbonate aeolianites represent backflow deposits, which accumulated because of the flow separation caused by the presence of topographic highs. The conspicuous concave‐up geometry of the deposit conformed to the shape of the separation bulb. In view of the inferred depositional mechanism, the disposition of the deposits and the signature of the palaeoflow direction suggest that the carbonate particles were derived from the north‐western coast of Saurashtra by strong south‐easterly winds. Massive granular carbonates with outsized basement clasts appear to be the product of avalanching of granular material from the higher contours because of oversteepening of the primary deposit.     

山东省济宁强磁异常区深部铁矿初步验证及其意义

山东省济宁磁异常是一个重、磁同源体,面积大于100 km2,磁异常峰值为3800nT。钻探验证在孔深1041.57～1796.54m位置发现铁矿体,矿体总厚度74.04～220m,磁性铁平均品位15.89～25.19%。矿石类型有条带状方解磁铁石英岩和条带状磁铁石英大理岩,矿石的主要组成矿物为石英、方解石、磁铁矿、磁赤铁矿、菱铁矿。矿体产于济宁岩群浅变质岩系中,矿床特征与条带状铁建造（BIF）铁矿或鞍山式铁矿有明显区别,铁矿成因类型属与千枚岩、变质中酸性火山岩、大理岩有关的沉积变质型铁矿床。该区铁矿资源潜力巨大。     

Zircon U–Pb ages, Hf and O isotopes constrain the crustal architecture of the ultrahigh-pressure Dabie orogen in China

The crustal structure of the Dabie orogen was reconstructed by a combined study of U–Pb ages, Hf and O isotope compositions of zircons from granitic gneiss from North Dabie, the largest lithotectonic unit in the orogen. The results were deciphered from metamorphic history to protolith origin with respect to continental subduction and exhumation. Zircon U–Pb dating provides consistent ages of 751 ± 7 Ma for protolith crystallization, and two group ages of 213 ± 4 to 245 ± 17 Ma and 126 ± 4 to 131 ± 36 Ma for regional metamorphism. Majority of zircon Hf isotope analyses displays negative ε_Hf(t) values of − 5.1 to − 2.9 with crust Hf model ages of 1.84 to 1.99 Ga, indicating protolith origin from reworking of middle Paleoproterozoic crust. The remaining analyses exhibit positive ε_Hf(t) values of 5.3 to 14.5 with mantle Hf model ages of 0.74 to 1.11 Ga, suggesting prompt reworking of Late Mesoproterozoic to Early Neoproterozoic juvenile crust. Zircon O isotope analyses yield δ¹⁸O values of − 3.26 to 2.79‰, indicating differential involvement of meteoric water in protolith magma by remelting of hydrothermally altered low δ¹⁸O rocks. North Dabie shares the same age of Neoproterozoic low δ¹⁸O protolith with Central Dabie experiencing the Triassic UHP metamorphism, but it was significantly reworked at Early Cretaceous in association with contemporaneous magma emplacement. The Rodinia breakup at about 750 Ma would lead to not only the reworking of juvenile crust in an active rift zone for bimodal protolith of Central Dabie, but also reworking of ancient crust in an arc-continent collision zone for the North Dabie protolith. The spatial difference in the metamorphic age (Triassic vs. Cretaceous) between the northern and southern parts of North Dabie suggests intra-crustal detachment during the continental subduction. Furthermore, the Dabie orogen would have a three-layer structure prior to the Early Cretaceous magmatism: Central Dabie in the upper, North Dabie in the middle, and the source region of Cretaceous magmas in the lower.     

中国大别山东南缘首次发现大坝陨坑构造

简介首次在大别山东南缘安徽省境内发现的大坝陨坑构造。经初步评价,知陨坑呈椭圆形,长轴呈北北东向,长约19km,短轴长约12km,最大坑深约2km,是一个有中央隆起区的复杂型陨坑。在卫片上陨坑显示环形影像,地貌形态为一洼地。陨坑基座保存尚好,可对它直观和追索陨坑构造边界。形成于230Ma左右的各类撞击变质岩石系列齐全,其中含有柯石英等典型的撞击变质矿物及撞击碎理等超微构造,特别是在陨坑基座内壁普遍发现有鉴别陨坑构造最可靠的标志——干裂自角砾岩,都证明大坝环形影像是一个典型的陨星撞击坑构造。它的发现,具有很大的科学及经济意义,对今后褶皱山区寻找和研究陨坑构造具有示范和指导作用,同时大大丰富了建设大别山世界地质公园的地质依据。无庸置疑此发现将促进大别山旅游业的发展及陨星撞击科普知识的传播。     

Reducing fishing vessel fuel consumption and NOX emissions

There is a growing concern with the impact of marine operations on the environment. This requires reducing fuel consumption and vessel pollution during operation. On-board computers and satellite communications will enable the operator to reduce fuel consumption and NO_X emissions during vessel operations.This paper presents the results of a study on this problem and how such an on-board system could be implemented to reduce fuel consumption and engine NO_X emissions.     

Three‐dimensional simulation of tsunami run‐up around conical island

At the circular Babi Island in the Flores tsunami (1992) and pear shaped island in the Okushiri event (1993), unexpectedly large tsunami run‐up heights in the lee of conic islands were observed. The flume and basin physical model studies were conducted in the Coastal Hydraulic Laboratory, Engineering Research and Development Center, U.S. Army Corps of Engineers to provide a better understanding of the physical phenomena and verify numerical models used in predicting tsunami wave run‐up on beaches, islands, and vertical walls. Reasonably accurate comparison of run‐up height of solitary waves on a circular island has been obtained between laboratory experimental results and two‐dimensional computation model results. In this study we apply three‐dimensional RANS model to simulate wave run‐up on conical island. In the run‐up computation we obtain that 3D calculations are in very good comparison with laboratory and 2D numerical results. A close examination of the three‐dimensional velocity distribution around conical island to compare with depth‐integrated model is performed. It is shown that the velocity distribution along the vertical coordinate is not uniform: and velocity field is weaker in the bottom layer and higher on the sea surface. The maximum difference (about 40%) appears at the time when solitary wave reached the circular island.     

A hierarchical real-time control architecture for a semi-autonomous underwater vehicle

This paper describes a real-time control architecture for Dual Use Semi-Autonomous Underwater Vehicle (DUSAUV), which has been developed at Korea Research Institute of Ships and Ocean Engineering (KRISO) for being a test-bed of development of underwater navigation and manipulator technologies. DUSAUV has three built-in computers, seven thrusters for six DOF motion control, one 4-function electric manipulator, one ballasting motor, built-in power source, and various sensors. A supervisor control system with GUI and a multi-purpose joystick is mounted on the surface vessel and communicates with vehicle through a fiber optic link. Furthermore, QNX, one of real-time operating system, is ported on the built-in control and navigation computers for real-time control purpose, while Microsoft OS product is ported in the supervisor computer for GUI programming convenience. A hierarchical control architecture, which consists of application layer, real-time layer and physical layer, has been developed for efficient control system of above complex underwater robotic system. The experimental results with implementation of the layered control architecture for various motion control of DUSAUV in an ocean engineering basin of KRISO is also presented.     

大岭子金矿地质特征及选矿浸出率

大岭子金矿V1矿体赋存于中元古界高黎贡山群变质岩中,受韧性剪切带控制,矿石类型以氧化矿石为主。提出选矿依据。     

济宁颜店铁矿地质特征及济宁岩群含矿性研究

伏于济宁滋阳山一带千米盖层之下的古元古代济宁岩群是一套低绿片岩相变质含铁岩系,主要岩石组合为千枚岩、板岩、磁铁石英岩等,其原岩为海相含灰质泥岩、砂岩类中酸性火山岩、硅铁岩等,该套岩系最大控制厚度达580m。其中赋存的条带状磁铁石英岩呈层状、似层状埋深在1612．89～1796．54m之间,共有5层铁矿,总厚度85．53m。估算预测的铁矿资源量（334）9．76亿t,mFe平均品位22．37％;低品位矿体预测的资源量（334）2．64亿t,mFe平均品位16．99％。     

大别山的变质碰撞混杂岩——以东部为例

大别山是中国东部中朝大陆板块与扬子大陆板块之间的碰撞造山带。具有薄皮构造的性质。组成两个碰撞大陆之间的滑脱（冲断剪切）带的岩石就是碰撞混杂岩组合。大别山由于剥露较深,仰冲壳楔完全被剥蚀,超高压变质带大面积出露,识别出碰撞混杂岩组合是对大别山进行几何分析的必要步骤。大别山碰撞混杂岩组合可分为南北两部分。北部为条带状片麻岩-超镁铁岩组合,南部为云母斜长片麻岩-榴辉岩组合,这两个组合的大部分都经历过超高压变质作用。它们的共同特点是具有宏观的＂碎斑结构＂和混杂作用。罗田穹隆是造山过程中早期形成的双冲式背斜,最后在造山晚期因东西向缩短的叠加而形成穹隆。