西藏札达盆地控盆断裂有限元数值模拟

札达盆地是喜马拉雅构造带中的一个山间断陷盆地,其演化过程与盆地两侧的控盆构造密切相关。对控盆断裂的构造应力场进行模拟计算,将有助于进一步深化对本区构造控盆的认识。因此,在对盆地构造地质进行详细调查的基础上,结合本区的深部地质与地球物理资料,对札达盆地控盆断裂的构造应力场进行了模拟。计算结果表明,札达盆地的演化明显受盆地两侧边界断裂的控制,札达盆地是在整体南北向挤压应力的作用下,不同块体差异隆升作用的结果。其南侧的控盆断裂为北倾的正断层,北侧的控盆断裂为南倾的逆断层,二者共同形成了南降北升的翘板式断陷盆地运动过程,是喜马拉雅地块在陆内汇聚挤压构造环境中构造应力场调整的一种方式。     

西藏冈底斯带石炭纪—二叠纪岛弧造山作用：火山岩及地球化学证据

系统研究了西藏冈底斯带石炭纪—二叠纪火山岩的时空分布、岩相学、元素及Sr、Nd、Pb 同位素地球化学和构造环境、源区性质,并与喜马拉雅带二叠纪火山岩进行了对比研究。冈底斯带石炭纪—二叠纪火山岩近东西向集中分布在冈底斯构造带中北部地带,空间上从东至西火山活动的强度和规模渐次减小,时间上从早至晚火山活动的强度和规模总体由弱到强。冈底斯带石炭纪—二叠纪火山岩形成于活动大陆边缘的岛弧构造环境,从早到晚岛弧造山作用经历了初始岛弧→早期岛弧→成熟岛弧的发展演变过程,火山岩浆来源于富集型地幔部分熔融作用,原始岩浆在形成和演化的过程中有俯冲洋壳及随带的深海沉积物和再循环进人地慢的地壳物质组分的强烈混染,明显不同于受地壳物质组分强烈混染的喜马拉雅带二叠纪陆缘裂陷型火山岩。综合研究冈底斯带及其邻区近年来的最新调查与研究成果,从北向南拟建了石炭纪—二叠纪冈底斯岛弧→雅鲁藏布江弧后裂谷盆地→喜马拉雅陆缘裂陷盆地的弧盆系时空结构演化模式,探讨了冈瓦纳大陆北缘石炭纪—二叠纪活动大陆边缘的岛弧造山作用与青藏高原古特提斯演化的耦合关系及其动力学机制,讨论了冈底斯带松多乡榴辉岩的形成过程。     

江西省九岭区地质灾害危险性区划

对九岭区地质灾害发育的基本特征及其地质环境条件进行了概述,并对其形成条件进行了相关性分析;通过对地质灾害发育的基本规律、控制因素、触发因素与地质灾害关系的分析,采用环境地质学原理,建立区域地质灾害空间预测模型,圈定九岭区地质灾害的危险性分区,为实时地质灾害时间预警预报圈定有效的空间靶区。预测单元采用规则的栅格(500m×500m),共14415个单元;评价指标主要包括地形地貌、工程地质岩类、地质构造、破坏地质环境人类工程活动等四大类26个因子;利用GIS技术,提取出相关的数据信息;信息量预测方程:Ii=-1.164X1-0.999X2-0.681X3 …… 0.203X25-0.135X26(其中X1、X2、X3、…X26取1或0,即某单元中存在某种因素时取1、否则取0),据此计算出各单元格的信息量;根据地质灾害危险性分区临界指标,确定单元格的地质灾害危险性等级;合并同类项,并考虑类似的地质、自然环境具有类似的地质灾害问题的原则,进行归并与单元边界线的修改,得出九岭区地质灾害危险性分区。     

热液成矿作用的地质地球化学动力学——以胶东牟平-乳山金矿带为例

通过对胶东牟平—乳山热液脉状金,铅锌矿床成矿动力学控制规律的研究,说明了建立热液成矿反应体系的方法,并得出以下认识:（1）区域断裂构造活动,通过影响成矿反应体系的热力学性质和条件,控制元素的富集和分散。（2）热液成矿过程中容矿断裂活动可划分为两种作用方式:脆性破裂和韧—脆性张开,构成热液成矿的两种构造动力学环境。（3）热液成矿反应体系是一种开放的动态的热力学体系。断裂的脆性破裂阶段,使体系处于强烈的过饱和状态,矿质在远离平衡状态下快速结晶,加剧物质分异;在脆—韧性张开阶段,矿质在接近平衡态体系中缓慢晶出。（4）热液演化晚期,金在残余溶液中富集;当断裂再次发生构造脉动震颤时,早期形成的块状黄铁矿矿石碎裂,富金溶液充填其中,形成含裂隙金和晶隙金的富矿石。成矿体系热力学演化与构造动力学条件有利的匹配控制着富矿石的形成。     

稀土矿床：基本特点与全球分布规律

本文介绍了全球稀土资源供需历史、现状和对未来的展望。从矿床成因视角切入，将稀土矿床分为内生和外生两大类型，其中内生稀土矿床包括碳酸岩型、碱性岩型、碱性岩型- 碳酸岩型、氧化铁铜金型、热液脉型，外生稀土矿床包括风化壳离子吸附型、沉积岩型、沉积矿产(煤矿、铝土矿和沉积磷矿)伴生型、砂矿和现代海洋底部含稀土的锰结核、结壳和软泥型。归纳总结了主要类型矿床的基本特点和时空分布；认为内生稀土矿床产出于四类构造环境，包括裂谷环境、碰撞后伸展环境、大陆碰撞环境和后俯冲伸展环境；从构造演化入手，探讨了在外生与内生地质过程中稀土元素的迁移和富集规律，建立了涵盖主要矿床类型的构造- 成矿模型。     

祁连山南部地区三叠纪弧后前陆盆地——基于沉积填充与大地构造的证据

本文通过对祁连山南部地区三叠纪沉积充填特征的研究,建立了盆地形成过程中沉积充填与区域构造演化的关联。依据沉积充填特征、构造接触关系及区域地质背景,认为祁连山南部地区三叠纪盆地具有弧后前陆盆地的构造属性;综合分析年代学、沉积物性和盆地内部填充单元的差异划分出与柴达木岛弧带和祁连山南部弧后前陆盆地相关的区域大地构造单元。认为早三叠世-中三叠世中期,南部遭受俯冲作用持续向北挤压推覆导致盆地挠曲沉降;中三叠世中期-晚三叠世中期发生弧(东昆仑-柴北缘)-陆(巴颜喀拉地块)碰撞,祁连山南部盆地挠曲沉降增大,其间形成区域性断裂和不整合等盆地记录的地质事件;晚三叠世晚期祁连山南部盆地发生过补偿陆相填充,弧后前陆盆地消亡。     

The effects of hazard zone information on judgements about earthquake damage

This study investigates the extent to which people's views on the causes and preventability of earthquake damage might be influenced by their degree of exposure to hazard as well as what information they have been given about the hazard. The results show that the provision of hazard zoning information influences judgements on preventability and causes of damage, but this effect depends on the degree of hazard faced by residents. In low hazard zones, information leads to the view that causes are manageable, whereas in high hazard zones information may induce a degree of fatalism. The use of public information in risk management needs to take into account the degree of risk faced by the recipients.     

Mineralogical and chemical evolution of the Ernest Henry Fe oxide–Cu–Au ore system, Cloncurry district, northwest Queensland, Australia

The Ernest Henry Cu–Au deposit was formed within a zoned, post-peak metamorphic hydrothermal system that overprinted metamorphosed dacite, andesite and diorite (ca 1740–1660 Ma). The Ernest Henry hydrothermal system was formed by two cycles of sodic and potassic alteration where biotite–magnetite alteration produced in the first cycle formed ca 1514±24 Ma, whereas paragenetically later Na–Ca veining formed ca 1529 +11/−8 Ma. These new U–Pb_titanite age dates support textural evidence for incursion of hydrothermal fluids after the metamorphic peak, and overlap with earlier estimates for the timing of Cu–Au mineralization (ca 1540–1500 Ma). A distal to proximal potassic alteration zone correlates with a large (up to 1.5 km) K–Fe–Mn–Ba enriched alteration zone that overprints earlier sodic alteration. Mass balance analysis indicates that K–Fe–Mn–Ba alteration—largely produced during pre-ore biotite- and magnetite-rich alteration—is associated with K–Rb–Cl–Ba–Fe–Mn and As enrichment and Na, Ca and Sr depletion. The aforementioned chemical exchange almost precisely counterbalances the mass changes associated with regional Na–Ca alteration. This initial transition from sodic to potassic alteration may have been formed during the evolution of a single fluid that evolved via alkali exchange during progressive fluid-rock interaction. Cu–Au ore, dominated by co-precipitated magnetite, minor specular hematite, and chalcopyrite as breccia matrix, forms a pipe-like body at the core of a proximal alteration zone dominated by K-feldspar alteration. Both the core and K-feldspar alteration overprint Na–Ca alteration and biotite–magnetite (K–Fe) alteration. Ore was associated with the concentration of a diverse range of elements (e.g. Cu, Au, Fe, Mo, U, Sb, W, Sn, Bi, Ag, F, REE, K, S, As, Co, Ba and Ca). Mineralization also involved the deposition of significant barite, K(–Ba)–feldspar, calcite, fluorite and complexly zoned pyrite. The complexly zoned pyrite and variable K–(Ba)–feldspar versus barite associations are interpreted to indicate fluctuating sulphur and/or barium supply. Together with the alteration zonation geochemistry and overprinting criteria, these data are interpreted to indicate that Cu–Au mineralization occurred as a result of fluid mixing during dilation and brecciation, in the location of the most intense initial potassic alteration. A link between early alteration (Na–Ca and K–Fe) and the later K-feldspathization and the Cu–Au ore is possible. However, the ore-related enrichments in particular elements (especially Ba, Mn, As, Mo, Ag, U, Sb and Bi) are so extreme compared with earlier alteration that another fluid, possibly magmatic in origin, contributed the diverse element suite geochemically independently of the earlier stages. Structural focussing of successive stages produced the distinctive alteration zoning, providing a basis both for exploration for similar deposits, and for an understanding of ore genesis.