昆仑山8.1级地震前中国大陆的构造应变背景

利用“网络工程”1998～2001年累积的1181个测站的GPS重复观测资料，采用双三次样条函数模型建立中国大陆水平运动模型速度场，用大地坐标在椭球面上计算各类应变场，详细分析了2001年昆仑山8．1级地震前中国大陆水平构造应变场空间分布特征。各类构造应变场的最高值都出现在喜马拉雅构造带与昆仑山地块内(地震断裂带南侧)，鲜水河—安宁河断裂带次之。分析表明，昆仑山8．1级地震正好发生在张性面膨胀应变率的高值区，第一、第二和最大剪应变率高值区边缘的突变区和最大、最小主应变率的高值区。     

A critical state model for sands dependent on stress and density

An elastoplastic model for sands is presented in this paper, which can describe stress–strain behaviour dependent on mean effective stress level and void ratio. The main features of the proposed model are: (a) a new state parameter, which is dependent on the initial void ratio and initial mean stress, is proposed and applied to the yield function in order to predict the plastic deformation for very loose sands; and (b) another new state parameter, which is used to determine the peak strength and describe the critical state behaviour of sands during shearing, is proposed in order to predict simply negative/positive dilatancy and the hardening/softening behaviour of medium or dense sands. In addition, the proposed model can also predict the stress–strain behaviour of sands under three-dimensional stress conditions by using a transformed stress tensor instead of ordinary stress tensor. Copyright © 2004 John Wiley & Sons, Ltd.     

Plane of elastic non-resisting tension material under foundation structures

In the frame of 2D-static problems one approaches the problem of elastic-NRT (not-resisting tension) semi-plane loaded on its limit line. This problem is intended to model the stress situation induced in the soil by a foundation structure. The solution, in terms of activated stress field, is searched for in the class of stress fields satisfying equilibrium and admissibility conditions, by applying an energy approach. Copyright © 2004 John Wiley & Sons, Ltd.     

浙西北江山─绍兴断裂带构造演化特征

江山—绍兴断裂带是中国南方最重要的构造带之一。它是江南陆块与华夏陆块神功运动形成的碰撞拼贴带。它表现出明显的多期变形、构造叠加的特征：神功运动形成近东西向平卧褶皱；印支运动沿断裂带有向北西强烈的推覆挤压。断裂带不同时期的活动反映了不同特征的构造环境，形成不同的构造变形特征，并对两侧的地质历史具有明显的控制作用。     

江汉盆地钻孔测井资料确定地应力最大水平主压应力方向

利用钻孔测井资料并运用地层倾角测量信息分析法，给出了江汉盆地地应力最大水平主压应力方向为ＮＥ６０～６５°     

行星磁场与卫星引力及其相对运动的统计关系

从知道某些天体具有磁场起，人们就对其磁场的起源提出种种解释，例如有电池说，转子说，化石说，发电机说等等。但由于这些学说都分别与某些观测事实相抵触而未被公认，因此星球磁场的起源一直是未能解决的命题。余先河先生提出，星球的磁场起源可能与所受的引力有关，行星的磁场强度正比于其所受卫星的引力；正比于卫星与行星的引力连线转动的相对角速度。本文对这两方面的命题分别进行了相关分析，得到其相关系数分别为：ｒ＝０．８４８１和ｒ＝０．８４２５，它们都在ａ＝０．０１的信度水平上相关。结果表明余新河关于行星磁场起源的设想是有基础的。本文还对其统计结果和可能机制进行了讨论。     

洛坝铅锌矿床的构造演化分析

洛坝铅锌矿床位于黄诸关韧脆性变形带所波及的范围内,断裂、褶皱、劈理、节理等形态构造类型均很发育,经对小型构造的统计及应力场分析证明,矿区变形主要是在海西—印支期长期存在的南北向古应力场持续作用下形成的。     

STRESS CORROSION CRACKING OF AISI 321 STAINLESS STEEL IN ACIDIC SEAWATER

ImooUonONSCCisoneofthemosttwortantcausoffailureofstaiuleSsstalequipmentandfacilitieS.Studiesonunh0refacilitiesshowedthatanaddicchloridesolutionfilmcouldbefo~onthescheeofstalandthatstaiuleSSstalisinaCtivedissolutionstateinaedicchloridesolutionopinetal.,l99O;Gnanamoorthyetal.,l99O).ltisgenerallythoughtxthatSCCcannotoimrwhenthematerialisinaCtiveanodicdissolutionstate,soitsomcewithresultingcasualties(0ldfieldetal.,l99O)arousedattentiont0it.SomeSCCmeCanisrnsproposedpeuang,l988,Newmanctal.,…     

台湾海峡西岸重力场变化梯度场图像分析

讨论了应用曲面拟合技术和利用离散的重力观测点的重力变化对特定研究区的重力场变化进行数值模拟以获取该区重力变化空间梯度场图像的具体方法;并应用该方法获得了2004年3月福建安溪3.6级地震前的重力变化空间梯度场图像,发现空间梯度场图像能清晰地反映出地震前重力场群体性变化的差异性;利用此方法对2005年6月~2006年3月间台湾海峡西岸重力场变化进行数值模拟,获得其空间梯度场图像。     

Finite element formulation and algorithms for unsaturated soils. Part II: Verification and application

The finite‐element formulation and integration algorithms developed in Part I are used to analyse a number of practical problems involving unsaturated and saturated soils. The formulation and algorithms perform well for all the cases analysed, with the robustness of the latter being largely insensitive to user‐defined parameters such as the number of coarse time steps and error control tolerances. The efficiency of the algorithms, as measured by the CPU time consumed, does not depend on the number of coarse time steps, but may be influenced by the error control tolerances. Based on the analyses presented here, typical values for the error control tolerances are suggested. It is also shown that the constitutive modelling framework presented in Part I can, by adjusting one constitutive equation and one or two material parameters, be used to simulate soils that expand or collapse upon wetting. Treating the suction as a strain variable instead of a stress variable proves to be an efficient and robust way of solving suction‐dependent plastic yielding. Moreover, the concept of the constitutive stress is a particularly convenient way of handling the transition between saturation and unsaturation. Copyright © 2003 John Wiley & Sons, Ltd.