大别山晓天—磨子潭断裂带石英脉流体包裹体的特征及其构造意义

晓天—磨子潭断裂流体包裹体的均一温度、盐度和捕俘压力研究结果表明:晓天—磨子潭断裂中石英脉中流体主要来自浅部,有多期次流体包裹体,流体包裹体的均一温度分为三个区间:140～180℃、190～240℃和270～340℃,反映了至少经历了三次强烈的流体活动。流体包裹体的盐度<10%,捕获压力<1.350×108Pa。总体上越靠近晓天—磨子潭断裂,包裹体的均一温度和盐度越高,捕获压力越大,局部地区的差异,能从断裂对流体控制上得到合理的解释;另外,流体包裹体的均一温度、盐度和捕获压力,在不同的显微构造,围岩性质、构造环境和时空范围中,发生不同的变化。一方面多次构造活动和热事件的驱动流体活动,另一方面流体的活动,降低了岩石脆—韧性变形的温压条件,促进了岩石的变形。     

Optimal design of passive energy dissipation systems based on H∞ and H2 performances

Passive energy dissipation devices (EDDs), such as viscous dampers, viscoelastic dampers, etc., have been used to effectively reduce the dynamic response of civil infrastructures, such as buildings and bridges, subject to earthquakes and strong winds. The design of these passive energy dissipation devices (EDDs) involves the determination of the optimal locations and the corresponding capacities. In this paper, we present two optimal design methodologies for passive EDDs based on active control theories, including H_∞ and H₂ performances, respectively. The optimal design methodologies presented are capable of determining the optimal locations and the corresponding capacities of EDDs. Emphasis is placed on the application of linear matrix inequality (LMI) for the effective design of passive EDDs using the popular MATLAB toolboxes. One important advantage of the proposed approaches is that the computation of the structural response is not needed in the design process. The proposed optimal design methodologies have been applied to: (i) a 10‐storey building and a 24‐storey building both subject to earthquake excitations, and (ii) a 76‐storey wind‐excited benchmark building, to demonstrate the advantages of the proposed design methodologies over the conventional equal capacity design. Copyright © 2002 John Wiley & Sons, Ltd.     

Study of a semi‐active stiffness damper under various earthquake inputs

Semi‐active stiffness damper (SASD) is one of many semi‐active control systems with the capability to mitigate the dynamic response using only a small amount of external power. The system consists of a hydraulic damper connected to the bracing frame in a selected story unit. In this paper, study of a SASD in two building models of five‐stories under four benchmark earthquake records is reported. The purpose of this study is to evaluate the effectiveness of the control system against structure type and varying earthquake inputs. Various control laws are chosen to work with SASD, such as: resetting control, switching control, linear quadratic regulator (LQR) and modified LQR, and the results are compared with no control and passive control cases. Numerical results show that the use of a SASD is effective in reducing seismic responses. Control effectiveness is dependent on the type of structure and earthquake excitation. Passive control is less effective than other control cases as expected. Resetting control, switching control and LQR generally perform similarly in response reduction. While modified LQR is more efficient and robust compared with other control algorithms. Copyright © 2002 John Wiley & Sons, Ltd.     

Towards a direct collapse–load method of design for concrete frames subjected to severe ground motions

Most current methods of design for concrete structures under earthquake loads rely on highly idealized ‘equivalent’ static representations of the seismic loads and linear‐elastic methods of structural analysis. With the continuing development of non‐linear methods of dynamic analysis for the overload behaviour and collapse of complete concrete structures, a more direct and more accurate design procedure becomes possible which considers conditions at system collapse. This paper describes an evaluation procedure that uses non‐linear dynamic collapse–load analysis together with global safety coefficients. A back‐calibration procedure for evaluating the global safety coefficients is also described. The aim of this paper is to open up discussion of alternative methods of design with improved accuracy which are necessary to move towards a direct collapse–load method of design. Copyright © 2002 John Wiley & Sons, Ltd.     

Ground‐shaking mapping for a scenario earthquake considering effects of geological conditions: a case study for the 1995 Hyogo‐ken Nanbu,Japan earthquake

In order to examine the applicability of ground‐shaking mapping techniques to a near‐field earthquake, a peak ground velocity map of the 1995 Hyogo‐ken Nanbu, Japan earthquake computed from seismic zoning methods that consider the effects of geological conditions is compared with the actual observed intensity map. When computing the ground‐shaking map, the site amplification at each site is calculated in terms of the average shear‐wave velocity of the ground estimated from the corresponding geomorphological conditions. This map shows a relatively good agreement with the observed intensity map. However, the computations provide smaller values for certain disastrous areas of the earthquake, where the effects on ground motion of a deep, irregular underground structure have been reported. The effect of such structures on site response is examined implementing 2D FEM analyses, thereby being also incorporated into the method. Results considering the effect of the irregular underground structure show better agreement with the observed intensity map. Copyright © 2002 John Wiley & Sons, Ltd.     

张北地震区三维构造特征

地震层析成像结果揭示了张北地震区的构造特征。震源区周围分布有相交的北北西和北东向低速异常带。极震区正下方壳内存在高速异常的坚固体 ,其周围被多条低速异常带围限。区域构造具备了大量积累应变能和向高应力区传递应变能的孕震构造特征 ,北北西和北东向的隐伏断裂共同构成了区域的发震构造。该震区在中新生代以来有过多期岩浆活动 ,震中区周围分布有几个新第三纪的火山口。极震区米家沟附近火山的三维剖分图给出了该火山从地表到壳内 10km深度的速度图像 ,中新生代的火山岩浆活动对该区域孕震构造的形成起了重要作用。     

华北板块北缘活动带元古宙构造岩片

新的研究证实 ,华北板块北缘残存一条元古宙构造岩片堆集带 ,包括古元古代、中元古代、新元古代等多期构造岩片。并相伴有 180 0Ma±、140 0Ma±、10 0 0Ma±、6 5 0Ma±的花岗岩类的侵入活动和构造变质成矿等热事件的年代记录 ,并在华北板块北部金镶边带中保存了相一致的信息 ,揭示了它们是陆缘多期拼贴造山的产物。这为超大陆旋回 ,特别是元古宙两次超大陆的聚合与裂解及其构造演化过程的研究提供了良好的野外实验园地 ,并为元古宙、特别是古元古代大陆的增生及Rodinia超大陆在北半球的存在或构造响应提出新的课题。     

准噶尔盆地基底火山岩中的辉石及其对盆地基底性质的示踪

根据钻井和航磁资料，准噶尔盆地基底可划分为西、北、南三区。3个地区火山岩中辉石的化学成分、种属名称各不相同。辉石化学成分反映出来的寄主岩的碱度、碱度演化趋势以及寄主岩形成的构造环境、构造环境演化史均各有差异，佐证了准噶尔盆地基底是由哈萨克斯坦板块东南缘、西伯利亚板块西南缘和塔里木板块北缘增生大陆拼合而成。其中西、北两区拼合较早，早石炭世末的早海西运动时抬升成陆；南区成陆较晚，晚古炭世末的晚海西运动使南区与西、北两区联合大陆对接，形成完整的准噶尔盆地海西褶皱基底。     

The Mount Parnitha (Athens) Earthquake of September 7, 1999: A Disaster Management Perspective

Natural Hazards - Strong earthquakes in the proximity of densely inhabited urban areas pose one ofthe most complicated disaster management situations faced by societies today. Herethe experience...     

The Mw = 6.0, 7 September 1999 Athens Earthquake

On 7 September 1999 at 11:56 GMT a destructive earthquake (M_w = 6.0) occurred close to Athens (Greece). The rupture process is examined using data from the Cornet local permanent network, as well as teleseismic recordings. Data recorded by a temporary seismological network were analyzed to study the aftershock sequence. The mainshock was relocated at 38.105°N, 23.565°E, about 20 km northwest of Athens. Four foreshocks were also relocated close to the mainshock. The modeling of teleseismic P and SH waves provides a well-constrained focal mechanism of the mainshock (strike = 105°, dip = 55° and rake = -80°) at a depth of 8 km and a seismic moment M₀ = 1.010²⁵ dyn·cm. The obtained fault plane solution represents normal faulting indicating an almost north-south extension. More than 3500 aftershocks were located, 1813 of which present RMS < 0.1 s and ERH, ERZ < 1.0 km. Two main clusters were distinguished, while the depth distribution is concentrated between 2 and 11 km. Over 1000 fault plane solutions of aftershocks were constrained, the majority of which also correspond to N–S extension. No surface breaks were observed but the fault plane solution of the mainshock is in agreement with the tectonics of the area and with the focal mechanisms obtained by aftershocks. The hypocenter of the mainshock is located on the deep western edge of the fault plane. The relocated epicenter coincides with the fringe that represents the highest deformation observed on the differential interferometric image. The calculated source duration is 5 sec, while the estimated dimensions of the fault are 15 km length and 10 km width. The source process is characterized by unilateral eastward rupture propagation, towards the city of Athens. An evident stop phase observed in the recordings of the Cornet local stations is interpreted as a barrier caused by the Aegaleo Mountain.