基于稳态碎岩方式的PDC钻头设计分析研究

自从20世纪80年代PDC复合片研发成功以来,PDC钻头由于其钻进性能强和耐磨性能好,在世界许多国家的石油钻井和地质勘探中得到了广泛应用,取得了很好的效果。但是,如何进一步提高其在钻探工程中的技术经济指标是一个很迫切的问题。俄罗斯博士Скоромных В. В.教授等对此进行多年研究,提出了稳态破碎岩石方式的思想,即在轴载和扭矩切力形成的合力R与切削面成垂直角度条件下,切入深度h不变时形成的一种碎岩方式。并在此基础上提出了一些设计PDC钻头方面的建议。     

崩塌堆积体启动坡面泥石流判别与防治 ——以北川县开坪乡平石板泥石流为例

强震区地震后大量的崩塌堆积体堆积于高陡斜坡中上部,堆积体远离居民点,一旦诱发为坡面泥石流,形成新的次生地质灾害,将严重威胁下方居民的生命财产安全。本文以北川县开坪乡平石板坡面泥石流为例,平石板沟“5.12”地震崩塌堆积体在2010、2013年强降雨作用下失稳转变为坡面泥石流淤积场镇。在平石板泥石流暴发特征介绍基础上,通过粒径不均匀系数、堆积体启动判别指标、后缘汇水面积等来分析崩塌堆积体启动条件及影响因素,并针对此类灾害发育特征,提出了通过上游稳拦固源方法进行治理的防治思路。以期为研究高陡斜坡堆积体的启动机制及防治提供一定的借鉴意义。     

5 000 m深部干热岩钻井方案的技术经济评价

介绍了美国芬顿山和法国苏茨深部干热岩的典型钻井技术方案,并根据我国干热岩钻井基础和地质成藏条件,从钻井深度、井身结构、钻进工艺和钻机设备等方面制定了3种不同的干热岩钻井技术方案,给出了具体技术指标数值。通过计算,对每种方案进行了技术经济评价,结果认为: 大直径钻井方案是技术可靠、经济可行的5 000 m干热岩钻探施工方案。     

沁水盆地原始水动力场类型及其对煤层气排采的影响

水动力场研究在煤层气勘探开发中具有重要作用。本文首先讨论了基于煤层气井排采资料的水动力场研究方法,在分析沁水盆地柿庄区块原始水动力场特点的基础上,结合前人在盆地其他区块水动力场的研究成果,分析了沁水盆地原始水动力场的类型,进而探讨了水动力场类型对煤层气排采的控制作用。研究表明:沁水盆地自边缘向腹部依次存在重力驱动型、滞流型和压实驱动型三种类型的区域原始水动力场;重力驱动型和滞流型水动力场具备煤层气保存条件,含气量高,煤层气排采效果相对较好,而压实驱动型水动力场虽具备一定的保存条件,但因地层压力较高,煤层气井排水降压困难,产气效果较差;无论是在重力驱动型还是滞流型的区域水动力场中,局部的低势汇聚区具备煤层气保存和排采的有利条件,煤层气开发效果一般较好。在未来煤层气勘探开发过程中,应将重力流驱型或滞流型水动力场所在区域中的局部低势汇聚区作为煤层气开发的甜点区。     

某水电站某泥石流沟综合治理概述

某水电站某泥石流沟内常年流水,属季节性排洪沟谷,水动力类型为暴雨,沟内松散物源丰富,具有泥石流发生条件。在上游区以拦挡泥石流为主,通过修建拦挡措施,减少形成泥石流的固体物质,在下游区以防水、边坡防护及引流等措施,通过修建溢流坝截断上游水流对沟内堆渣体渗流影响;通过修建排洪渠及排洪洞引流;通过削坡、修坡进行边坡维护加固。确保了导流洞出口及上下行交通洞进出口的施工期安全及运行安全。     

对坡面径流挟沙力研究的几点认识

坡面径流挟沙力是土壤侵蚀过程模型的核心输入参数。在系统界定坡面径流挟沙力概念的基础上,深入分析了坡面径流水动力学特性和泥沙特性对坡面径流挟沙力的影响及其机制,受降雨、地形、土壤、植被、土地利用、结皮形成、细沟发育和砾石出露等多种因素时空变异的综合影响,坡面径流挟沙力具有强烈的时空变化特征,导致坡面径流挟沙力的测定较为困难。将确定挟沙力常用的方法划分为河流挟沙力方程修正法、推理法、模型模拟法和测量法,比较分析了不同方法的优缺点。未来的研究应该重点关注挟沙力测定方法与技术、坡面径流输沙过程的动力机制、典型土壤的挟沙力、挟沙力方程构建与验证及变化条件下坡面径流挟沙力等方面。     

Design principles for origin-destination flow maps

Origin-destination flow maps are often difficult to read due to overlapping flows. Cartographers have developed design principles in manual cartography for origin-destination flow maps to reduce overlaps and increase readability. These design principles are identified and documented using a quantitative content analysis of 97 geographic origin-destination flow maps without branching or merging flows. The effectiveness of selected design principles is verified in a user study with 215 participants. Findings show that (a) curved flows are more effective than straight flows, (b) arrows indicate direction more effectively than tapered line widths, and (c) flows between nodes are more effective than flows between areas. These findings, combined with results from user studies in graph drawing, conclude that effective and efficient origin-destination flow maps should be designed according to the following design principles: overlaps between flows are minimized; symmetric flows are preferred to asymmetric flows; longer flows are curved more than shorter or peripheral flows; acute angles between crossing flows are avoided; sharp bends in flow lines are avoided; flows do not pass under unconnected nodes; flows are radially distributed around nodes; flow direction is indicated with arrowheads; and flow width is scaled with represented quantity.     

基于非均质地层参数表征的颗粒流模型构建

非均质地层参数的获取与表征方法是浅层地质体改造的重要依据。基于非均质地层的地质建模,表征具有随机不确定性和模糊不确定性的土体表观参数和物理力学参数。利用 Weibull 分布统计描述局部地层信息,并应用Diamond-Square分形插值方法,结合差分盒子维计算非均质地层分形维数,进一步合理演算整体地层参数。采用PFC3D数值模拟软件,结合马尔科夫链蒙特卡洛方法采样数据,对非均质地层块石颗粒及土颗粒进行建模。通过非均质地层模拟结果,发现其破坏过程与应力应变曲线要比均质土体复杂得多,由于块石大颗粒的含量、分布特性对土样力学性质影响显著。本文建模方法有助于非均质地层参数表征研究。     

甘肃舟曲垭豁口滑坡复活机理及成因探讨

2019年7月19日18时许,甘肃舟曲县垭豁口滑坡复活,约3.92×106 m3的滑体顺坡而下,迅速流入岷江,堵塞河道,造成河道水位上升,江边公路中断,滑坡变形持续至8月中旬。基于野外勘察、遥感解译、钻孔勘探等方法获取了滑坡变形的基本特征,并开展了滑坡监测工作,并结合气象资料,探讨了该滑坡复活原因及启动机制。初步研究认为,该滑坡为降雨诱发。通过对滑坡变形历史进行梳理,结合滑带证据,滑坡复活机理可概括为:首先上部块体缓慢蠕变,降雨后发生塑性流滑;其次,因上部滑体堆积在滑坡中部,造成中部平台堆载,引发中部滑体变形;最终一滑而下,刮产连带下部滑体坠入河道。滑坡的上中下三部分滑体逐步被激活,最初缓慢变形,随后加速启动。滑坡变形模式为蠕滑—拉裂—流滑。对滑坡变形过程和机理的初步判断为滑坡灾害应急处置提供了科学依据。     

Extenuating the parameters using HEC-HMS hydrological model for ungauged catchment in the central Omo-Gibe Basin of Ethiopia

Characteristics of ungauged catchments can be studied from the hydrological model parameters of gauged catchments. In this research, discharge prediction was carried out in ungauged catchments using HEC-HMS in the central Omo-Gibe basin. Linear regression, spatial proximity, area ratio, and sub-basin mean were amalgamated for regionalization. The regional model parameters of the gauged catchment and physical characteristics of ungauged catchments were collated together to develop the equations to predict discharge from ungauged catchments. From the sensitivity analysis, crop coefficient (CC), storage coefficient (R), constant rate (CR), and time of concentration (TC) are found to be more sensitive than others. The model efficiency was evaluated using Nash–Sutcliffe Efficiency (N_SE) which was greater than 0.75, varying between ?10% and +10% and the coefficient of determination (R²) was approximated to be 0.8 during the calibration and validation period. The model parameters in ungauged catchments were determined using the regional model (linear regression), sub-basin mean, area ratio, and spatial proximity methods, and the discharge was simulated using the HEC-HMS model. Linear regression was used in the prediction where p-value ≤ 0.1, determination coefficient (R²) = 0.91 for crop coefficient (CC) and 0.99 for maximum deficit (MD). Constant rate (CR), maximum storage (MS), initial storage (IS), storage coefficient (R), and time of concentration (TC) were obtained. The result is that an average of 30 m³/s and 15 m³/s as the maximum monthly simulated flow for ungauged sub-catchments, i.e. Denchiya and Mansa of the main river basin .