Composition and Useful Properties of Tailings of Marine Manganese Nodules and Crusts

Marine manganese nodules and crusts, when processed, yield tailings which may be utilized for environmental and economic benefit. The key to the reasonable and effective utilization of these tailings lies in making a systematic appraisal of their composition and properties. This article gives an introduction to the investigation of manganese tailings properties. The tailings have a high iron and/or manganese content, high surface area, high porosity, and fine grain size. Some tailings have a high rare earth element content which is valuable. They may also have high SO₃, arsenic, and uranium contents which are harmful. Depending on the process used to produce the tailings, there will likely be some differences in chemical composition, mineral assemblages, surface area and adsorption capability, pore diameter and volume, density and pH. In assigning potentially beneficial applications for these tailings, these differences should be taken into account to optimize utilization.     

Investigation of the hydrate reservoir production under different depressurization modes

Abstract

Large reserves of natural gas hydrates exist, and the depressurization method has the greatest potential for gas hydrate reservoir recovery. Currently, the most commonly adopted depressurization simulation method is a constant bottom-hole pressure production scheme. This study proposes a new depressurization mode with decreasing bottom-hole pressure. The production characteristic was numerically investigated using this method. The results show the following: (1) As the depressurization exponent (n) decreases, the development effect improves, and production indexes including cumulative gas production/dissociation and gas-water ratio increase. However, the reservoir energy consumption is higher and the hydrate reformation is more severe. (2) Compared to the proposed depressurization mode, the hydrate production index of the constant bottom-hole pressure production (n?=?0) is better. However, the hydrate reservoir energy consumption is higher and the hydrate reformation is more severe using constant bottom-hole pressure production. (3) To achieve a balance between production and reservoir energy consumption during depressurization production, the bottom-hole pressure should be controlled by selecting a suitable depressurization exponent between n_min and n_max, which can be determined through numerical simulations.     

运用德尔菲调查—灰色统计法确立水库鱼产力综合评价中的指标权重体系

本文运用德尔菲方法对水库鱼产力综合评价中指标权重的合理分配问题作了专家调查,并采用灰色统计法对调查结果进行归纳处理,从而确立了一个水库鱼产力影响因素诸层次各方面的评价指标权重体系,可供今后的评价工作参考使用。     

东营北部凸起带古冲沟储层分布规律研究

在油田勘探与开发中 ,充分认识古冲沟油气藏的勘探与开发是十分重要和有意义的。本文利用东营北部凸起带的地质、钻井、航磁和地震等资料 ,对古冲沟在地震剖面上的特征和古冲沟储层预测方法等进行了研究与探讨     

某矿山天然放射性核素的调查

对某矿山工作场所和生活区分别进行了样品采集,并使用ORTEC公司生产的16000道HPGeγ能谱仪进行了测量。结果表明,该矿山工作场所天然放射性核素的比活度大多高于生活区,其中危害最大的为尾矿坝;某些生活区天然放射性核素的比活度比对照点和国家均值要高,但多数都在国家均值范围内,最高值出现在3号生活区的农田土样中,其天然放射性核素的比活度分别为：α（226^Ra）——750．4Bq/kg、α（232^Th）——91．5Bq/kg、α（40^K）——1202Bq/kg。     

Effect of Multipoint Heterogeneity on Nonlinear Transformations for Geological Modeling： Porosity-Permeability Relations Revisited

An analysis of statistical expected values for transformations is performed in this study to quantify the effect of heterogeneity on spatial geological modeling and evaluations. Algebraic transformations are frequently applied to data from logging to allow for the modeling of geological properties. Transformations may be powers, products, and exponential operations which are commonly used in well-known relations (e.g., porosity-permeability transforms). The results of this study show that correct computations must account for residual transformation terms which arise due to lack of independence among heterogeneous geological properties. In the case of an exponential porosity-permeability transform, the values may be positive. This proves that a simple exponential model back-transformed from linear regression underestimates permeability. In the case of transformations involving two or more properties, residual terms may represent the contribution of heterogeneous components which occur when properties vary together, regardless of a pair-wise linear independence. A consequence of power- and product-transform models is that regression equationswithin those transformations need corrections via residual cumulants. A generalization of this result isthat transformations of multivariate spatial attributes require multiple-point random variable relations. This analysis provides practical solutions leading to a methodology for nonlinear modeling using correct back transformations in geology.     

贵州鹅项水库沉积物特征及其土壤侵蚀的意义

对位于贵州西南部非喀斯特丘原区的鹅项水库中取得的一沉积物样芯（EX-1）做了¹³⁷Cs,TOC,C/N和粒度分析以及矿物磁性测量。通过对这些分析和测量结果进行解译,推测了在过去的45年（1960～2005年）中这一水库的汇水流域内土壤侵蚀强度的相对变化。在这45年中,鹅项水库流域的土壤侵蚀经历了由弱到强再持续减弱的一个过程。将这一推测结果与流域内降水数据和土地利用/覆被变化资料数据相结合,探究了该流域土壤侵蚀强度变化的原因。与贵州西南部典型喀斯特流域的情况相比,在鹅项流域内,土地利用/覆被变化情况对土壤侵蚀强度的影响相对次要,而降水对土壤侵蚀强度变化的影响则更为重要。这可能主要因为与典型喀斯特流域相比,鹅项流域的土层较厚、植被覆盖较好。     

大港油田官142断块巨厚砂岩的储层流动单元

以黄骅坳陷官142断块中生界油藏为例,探讨巨厚砂岩储层流动单元的研究方法。巨厚砂岩储层流动单元研究包括两个层次,一为确定渗流屏障和连通体的分布,二为连通体内部储层渗流差异分析。研究表明,官142断块渗流屏障主要有泥质屏障、钙质砂岩胶结屏障和钙质砂砾岩胶结屏障3种类型。通过对连通体内部砂体渗流差异性分析,将连通体划分为3类流动单元。其中A类流动单元以粗孔、粗喉类型为主,渗流性能好,吸水强度大;B类流动单元储层为中孔、中喉型,渗流性能中等,吸水强度次之;C类流动单元储层多为粉细砂岩、砂砾岩或钙质胶结稍差的储层,吸水强度较差。通过流动单元的划分与研究,对预测该区的剩余油分布规律和优化调整方案提供依据。     

华北安鹤煤田煤储层特征与煤层气有利区分布

通过对安鹤煤田采集煤样的煤质、显微组分、煤相、显微裂隙分析,等温吸附、低温氮比表面及孔隙结构和压汞孔隙结构测试,研究了该区煤层气赋存的地质条件、煤层气生气地质特征和煤储层物性特征。并采用基于G IS的多层次模糊数学评价方法计算了该区的煤层气资源量,预测了煤层气有利区分布。研究结果表明,该区煤层气总资源量为1 115.73×108m3,煤层气资源丰度平均为1.18×108m3/km2,具有很好的煤层气资源开发潜力。在煤田中部的四矿到八矿之间的地区以及北部的水冶镇附近地区,煤层累计有效厚度大、煤层气资源丰度高、煤层埋深适中、煤储层孔裂隙系统发育、渗透性高,是该区煤层气勘探开发的最有利目标区。     

大庆杏南地区葡Ⅰ组三角洲前缘储层的非均质性

当油田主力油层进入高含水期时,非主力油层接替主力油层将成为必然趋势。三角洲前缘亚相储层非均质性较强,一直以来被作为非主力油层。为提高非主力油层的储量动用程度,必须精细研究三角洲前缘亚相储层非均质性特征,查明剩余油分布规律,从而有效指导油田开发的调整挖潜。利用密井网、岩矿鉴定等资料对杏南地区葡I油层组前缘亚相储层进行研究,将三角洲前缘细分为枝状、朵状、席状3种类型,详细分析了不同沉积环境下砂体的成因类型,描述了不同类型砂体在平面上、空间上的展布特征和组合关系,不同砂体内部性质的差异以及砂体内部微观孔隙结构的类型和分布特征,从平面、层间、层内以及微观特征等方面研究了三角洲前缘储层的非均质性。在此基础上分析了储层非均质性对剩余油分布的影响,指出不同三角洲前缘储层中剩余油的富集位置。