三维地层开挖的可视化表达方法与实现

智慧城市实际上就是利用现代化信息技术,实现对城市的智慧管理。城市市政工程中地层智能开挖和智能施工是智慧城市运用现代化信息技术的重要标志。GIS三维可视化的主要工具之一就是Arc Scene,是三维可视化的展示平台。本文主要通过ArcEngine组件库,以钢企管线管理平台为例,利用多面片理论,详细地介绍了从三维地层的开挖区域选择,到开挖基坑的实现,再到施工量的计算整个流程,最终为城市或者工厂地下施工的设计者和决策者提供依据。     

Analysis of the Dynamic Performance of an Underground Excavation in Jointed Rock under Repeated Seismic Loading

Results from field observations of dynamic behaviour of an underground excavation have been compared with numerical studies of the rock deformation history. The field behaviour shows progressive accumulation of rock displacement and excavation deformation under successive episodes of dynamic loading. It is possible to reproduce the modes of rock response quite well using a Distinct Element model of the rock mass, but the way displacements develop is dependent on the joint model used in the analysis. It is suggested that, in rock masses subject to repeated dynamic loading, excavation design may need to take account of the prospect of repeated episodes of transient loading at the excavation site.     

超前锚杆短循环法在砂砾石隧洞挂口施工中的应用

介绍了在支洞工程的施工中,利用超前锚杆短循环法解决在砂砾石地层中挂口难题的具体措施和关键技术,实现了工程自身及周围围道公路,升压站等重要建筑物的安全技术要求。     

地震计线性误差精确测试

利用同步测试标准地震数据采集器标定电流的地震计线性误差测试方法,避免了标定信号输出电流波动对地震计线性误差测试的影响,按DB/T 21—2007规定的方法进行数据处理,并判定结果是否符合DB/T 22—2007的要求。实际测试表明,该方法测试精度可以达到0.000 5%,满足测试线性偏差小于0.01%的需要,且操作简单,无额外设备要求,可行性高,可在固定地震台站、野外等条件下使用,具有较大的应用价值。     

开挖前降水引发基坑变形机制模型试验研究

现有基坑相关研究主要关注土方开挖过程引起的变形,认为围护结构变形起点是土方第1次开挖。然而,一些工程实测表明,基坑开挖前降水阶段即可引起围护结构及周边地层发生厘米级的变形。显然,未考虑开挖前变形的基坑监测数据将低估基坑施工的环境效应。为了研究基坑开挖前降水引发基坑变形的机制,开展了室内模型试验,对基坑开挖前降水过程进行了缩尺精细化模拟。通过微型降水井的设置与调控,模型试验真实再现了实际基坑降水过程中井流效应对围护结构受力变形的影响。试验过程中发现,随着降水的进行,坑外降水漏斗不断扩展,围护结构悬臂式侧移及坑外拱肩式地面沉降也随之产生。另外,降水导致墙前水压力明显减小,并诱发墙前侧向总压力重分布（以减小为主）,围护结构为此发生指向坑内的悬臂式运动以寻求新的受力平衡,并通过墙后土体损失诱发坑外地层变形。     

基于组合权重与灰色关联度分析法的地铁深基坑开挖稳定性评价

伴随着城市的快速发展,地铁深基坑工程越来越多。在开挖过程中如何对其稳定性进行评价,是当前需要重点关注的问题。以成都地铁十七号线凤溪站深基坑支护开挖工程为依托,利用层次分析确定的主观权重与利用熵值法确定的客观权重计算获得组合权重,并与灰色关联度分析法相结合,通过现场数据采集并进行综合评判,客观评价地铁深基坑开挖的稳定性。结果表明,各监测项目对基坑稳定性的重要程度从大到小依次为桩顶水平位移（0.29）、地表沉降（0.24）、建筑物沉降（0.19）、桩顶沉降（0.18）、内支撑轴力（0.10）,基坑稳定性综合评判结果等级为"非常好"。所建立的评价模型可为类似地铁深基坑开挖稳定性评价提供新的方法。     

����شŵ͵�λ�Ƴ����һ�ֿ��ܻ���

????????????????????????????1998-01-10???????????o????Ч?????????????????????????λ?????????Ч?????????仯???????о?????????????????Ч?????????仯????“???λ??”????????????????????仯?????????????Ч????????仯??????????λ????????????????????     

PARAMETER AND VARIANCE ESTIMATION IN GEOTECHNICAL BACKANALYSIS USING PRIOR INFORMATION

A probabilistic framework to perform inverse analysis of geotechnical problems is presented. The formulation allows the incorporation of existing prior information on the parameters in a consistent way. The method is based on the maximum likelihood approach that allows a straightforward introduction of the error structure of field measurements and prior information. The difficulty of ascribing definite values to the uncertainties associated with the various types of observations is overcome by including the corresponding variances in the set of parameters to be identified. The inverse analysis results in a minimization problem that is solved by coupling the optimization technique to the finite element method. Two examples are presented to illustrate the performance of the method. The first one corresponds to a synthetic case simulating the excavation of a tunnel. Young's modulus, K₀ value and measurements variances are identified. The second case concerns the excavation of a large underground cavern in which again Young's modulus and K₀ are identified. It is shown that introduction of prior information permits the estimation of parameters more consistent with all available informations that include not only monitored displacements but also results from in situ tests carried out during the site investigation stage.     

老滑坡路段路堑开挖与超前支护效果

为防止老滑坡路段路堑开挖过程中出现路堑边坡失稳的问题,以在建某高速公路老滑坡段路堑失稳边坡为例,借助数值分析,进行了老滑坡路段路堑开挖与超前支护效果研究。结果表明：1）一般宽平台开挖模式能提高边坡的整体稳定性;然而,对于存在具有膨胀性质滑带土的牵引式老滑坡,坡脚采用宽平台刷坡减重不利于路堑边坡的稳定,必须要采取超前支护,如锚索、抗滑桩等,必要时要紧急采取清方卸载措施。2）锚索超前支护能够有效抑制边坡变形,需采用有效措施提高设置在坡脚处锚索的抗拉强度,如施加预应力等。3）抗滑桩超前支护应注意桩位、桩长、桩距的优化设计。建议抗滑桩采用锚拉,对桩前坡体中的滑带进行超前注浆,有必要沿老滑坡主滑方向布置多排抗滑桩,或采用h型桩体设计。     

Study on Ship Automatic Berthing System with Mooring Lines

This study describes an automatic berthing system with mooring lines. It is designed to be berthed by using mooring device on the upper deck of a ship. It is to berth once maintaining parallel with the quay by controlling both forward and aft breast lines. Berthing method is used through length adjustment of mooring lines connected between ship and quay by controlling the angular velocity and the torque of hydraulic motor in mooring device. The study is conducted under three changing conditions of draft, such as even-keel, rise of the gravity center and trim to stern. Variables affecting berthing stability are determined based on the control performance of each condition. Bond graphs method is used to model the system. Controller is designed as PID control method of reference-model algorithm. The control program is composed of synchronous control system based on the equations derived with the numerical analysis. The tank test is conducted to verify the usefulness of the control program.