南极半岛周边海域表层沉积物粒度分布特征及其环境指示意义

基于南极半岛周边海域表层沉积物调查以及收集的资料,并通过分析表层沉积物粒度数据研究沉积物类型和分布特征,探讨沉积物的变化规律。南极半岛周边海域的沉积物类型比较丰富,主要分为四大类:砾质、砂质、粉砂质以及泥质沉积物;根据不同的水深和地貌单元可分为陆架(或岛架)碎屑沉积物、陆坡(或岛坡)沉积物和深海沉积物。研究区沉积物属于冰海沉积物,并可划分为残副冰碛物和混合副冰碛物。沉积物的搬运介质以冰川、冰筏为主,海流对沉积物的影响较为明显,沉积物类型随地形变化而呈有规律的分布。     

Knowledge diffusion from GIScience to other fields: the example of the usage of weighted surface networks in nanotechnology

This article demonstrates how the generalisation of topographic surfaces has been formalised by means of graph theory and how this formalised approach has been integrated into an ISO standard that is employed within nanotechnology. By applying concepts from higher-dimensional calculus and topology, it is shown that Morse functions are those mappings that are ideally suited for the formal characterisation of topographic surfaces. Based on this result, a data structure termed weighted surface network is defined that may be applied for both the characterisation and the generalisation of the topological structure of a topographic surface. Hereafter, the focus is laid on specific issues of the standard ISO 25178-2; within this standard change trees, a data structure similar to weighted surface networks, are applied to portray the topological information of topographic surfaces. Furthermore, an approach termed Wolf pruning is used to simplify the change tree, with this pruning method being equivalent to the graph-theoretic contractions by which weighted surface networks can be simplified. Finally, some practical applications of the standard ISO 25178-2 within nanotechnology are discussed.     

Greenland Ice Sheet surface melt: A review

Surface melt has great impacts on the Greenland Ice Sheet （GrlS） mass balance and thereby has become the focus of significant GrlS research in recent years. The production, transport, and release processes of surface meltwater are the keys to understanding the poten- tial impacts of the GrlS surface melt. These hydrological processes can elucidate the following scientific questions： How much melt- water is produced atop the GrlS？ What are the characteristics of the meltwater-formed supraglacial hydrological system？ How does the meltwater influence the GrlS motion？ The GrlS supraglacial hydrology has a number of key roles and yet continues to be poorly understood or documented. This paper summarizes the current understanding of the GrlS surface melt, emphasizing the three essential supraglacial hydrological processes： （1） meltwater production： surface melt modeling is an important approach to acquire surface melt information, and areas, depths, and volumes of supraglacial lakes extracted from remotely sensed imagery can also provide surface melt information; （2） meltwater transport： the spatial distributions of supraglacial lakes, supraglacial sarams, moulins, and crevasses demonstrate the characteristics of the supraglacial hydrological system, revealing the meltwater transport process; and （3） meltwater release： the release of meltwater into the englacial and the subglacial ice sheet has important but undetermined impacts on the GrlS motion. The correlation between surface runoff and the GrlS motion speed is employed to understand these influences.     

我国西南地区干湿季降水的主模态分析

利用我国西南地区26个台站降水资料,通过经验正交函数（EOF）分解的方法,分析了1980～2009年该地区干季（10～4月）和湿季（5～9月）降水的主模态。我国西南地区干季降水的时空变化存在两种主模态,它们分别可以解释总方差的22.4%和15.6%。第1主模态为全区一致型,具有准两年周期振荡的年际变化特征;第2主模态为东南—西北反向型,从20世纪90年代中期至21世纪初呈现2～3年的变化周期。我国西南地区湿季降水的时空变化存在三种主模态,它们分别可以解释总方差的17.1%,13.8%和11.1%。第1主模态为全区一致型,20世纪90年代初期具有较强的2～4年周期;第2主模态为经向偶极子型分布,并具有显著的4年周期;第3主模态为纬向偶极子型分布,具有2～4年的年际变化信号。进一步利用NCEP/NCAR再分析资料以及美国国家海洋和大气管理局（NOAA）的海表面温度（SST）资料,通过合成分析和回归分析的方法探讨了与干湿季降水各主模态对应的大尺度大气环流和海温状况。我国西南地区干季降水第1主模态与北极涛动（AO）有明显的正相关关系,对应的大气环流和海温状况表现为高纬北冰洋与中纬度地区上空高度场的反向异常分布,北大西洋和北太平洋海温低纬与中高纬的偶极子型异常分布;第2主模态与中高纬欧亚大陆上空高度场经向偶极子型异常分布有关,中纬度北太平洋的海温异常与该模态具有紧密的联系。我国西南地区湿季降水第1主模态与北大西洋涛动（NAO）显著负相关,对应的大气环流和海温状况表现为北大西洋上,高纬度与中纬度地区上空高度场的偶极子型异常分布,海温从低纬到中高纬的三极子型异常分布;第2主模态受欧亚大陆上空高度场经向三极子型异常分布影响,并与北太平洋海温异常的一致型分布有关;第3主模态可能与El Ni?o Modoki有关,同时受到南亚高压的影响,赤道太平洋海温的纬向三极子型异常分布对该模态具有一定的潜在预报意义。     

热带大气对单一型赤道非对称热源的响应

本文采用Gill模式得到了热带大气对单一型赤道非对称热源响应的理论解析通解,从理论上完善了单一型赤道非对称热源激发的赤道非对称的大气响应结果。同时在单一型赤道非对称热源的位置、强度及范围变化对大气响应的影响方面做了详细的研究。当热源中心位置北移,北半球气旋强度增加、位置北移,同时赤道辐合气流减弱而越赤道气流增强;当热源强度增强(减弱),热源激发的大气响应整体增强(减弱),但大气分布型不发生变化;当热源范围不断增大(减小)时,北半球气旋强度增强(减弱)、位置西移(东移)、范围增大(减小),同时越赤道气流增强(减弱)。将上述结论应用于分析孟加拉湾地区海温对夏季风爆发影响的研究,指出当孟加拉湾地区经向最大暖海温位于赤道附近时,其两侧表现为Rossby波响应的Gill型气旋环流,而海温暖轴北移后,其南侧激发出有利于季风爆发的越赤道气流,这是Rossby重力混合波对热源响应的结果。这是上述理论结果的一个很好例证,同时也为孟加拉湾夏季风的爆发给出一种动力学解释。     

汕尾浮标站的风况特征分析

利用广东省汕尾红海湾大型浮标站的近4年观测资料,统计分析汕尾红海湾近海海面风的日变化特征、季节变化特征和大风特点.分析表明：红海湾近海海面秋、冬风速大,夏季风速小,风向以东北风为主;平均情况下中午前后风速较小,早晚较大,风向以东北风为主;冷空气和热带气旋是造成红海湾近海大风的主要天气系统;大风平均阵风系数较小,最大阵风系数在热带气旋影响下出现.     

渤海表层悬沙的时空分布特征及其动力成因

针对目前渤海整个海域悬浮泥沙分布全貌的研究不充分。根据2000—2004年渤海表层悬浮泥沙分布特征选取7个典型海区,通过利用长时间序列悬沙质量浓度和风场遥感反演资料,在分析悬沙质量浓度与局地风速、物质来源等关系的基础上,定量研究风浪和潮流共同作用下、随季节显著变化的沉积物再悬浮过程,从而揭示整个渤海海域代表性海区悬沙质量浓度时空分布的动力成因。渤海不同海区表层悬沙质量浓度绝对值差别很大,多年平均最高质量浓度在20~450mg/L变化,高质量浓度集中在近岸河口区及其邻近海域,如黄河口和辽河口地区,低质量浓度区位于渤海中部、渤海海峡以及秦皇岛外海(属于近岸海域却质量浓度常年偏低的特殊海区)。渤海表层悬沙质量浓度具有明显的季节变化特征,风场的季节变化是主要影响因子,各代表性海区悬沙质量浓度与风速之间具有显著正相关关系。悬沙质量浓度与风速之间存在一定时间段的滞后相关。沉积物再悬浮的定量研究表明,除渤海海峡外,渤海其它典型海区表层悬沙质量浓度及其季节变化,均与各自海区风浪和潮流共同作用产生的最大底流速及其季节变化相对应。在渤海,底层沉积物再悬浮的季节变化是影响悬沙质量浓度季节变化最关键的动力过程。     

热带气旋各个要素对于海表面降温的影响

热带气旋的经过会引起海洋内部强烈的剪切,由剪切不稳定触发的强混合可以将温跃层的冷水卷挟上来,导致海洋混合层加深和海表面温度的下降。本文利用3-Dimensional Price Weller and Pinkel(3DPWP)模式模拟了不同热带气旋下的海表面降温,分别研究了热带气旋各个要素(气旋的强度,最大风速半径和移动速度)对于海表面降温的影响。模拟结果表明,海表面降温的空间分布主要受到气旋移动速度的影响,移动速度越快的降温,右偏现象越明显。海表面降温的幅度以及降温的区域随着气旋强度和最大风速半径的增大而单调递增,随移动速度增加而单调递减。海表面降温与热带气旋3个要素的拟合结果表明,气旋各个要素对于海表面降温影响作用的大小不同:在气旋移动速度较慢(小于4.5m/s)时,海表面降温主要受到气旋级别和移动速度的影响,在气旋移动速度较快(大于4.5m/s)时,气旋移动速度的影响作用减弱,海表面降温主要受气旋级别的影响。气旋最大风速半径的影响作用始终较小。     

Sea surface temperature and salinity reconstruction based on stable isotopes and Mg/Ca of planktonic foraminifera in the western Pacific Warm Pool during the last 155 ka

Changes in sea surface temperature(SST), seawater oxygen isotope(δ 18 O sw), and local salinity proxy(δ 18 O sw-ss) in the past 155 ka were studied using a sediment core(MD06-3052) from the northern edge of the western Pacifi c Warm Pool(WPWP), within the fl ow path of the bifurcation of the North Equatorial Current. Our records reveal a lead-lag relationship between paired Mg/Ca-SST and δ 18 O during Termination II and the last interglacial period. Similarity in SST between our site and the Antarctic temperature proxy and in CO 2 profi le showed a close connection between the WPWP and the Antarctic. Values of δ 18 O sw exhibited very similar variations to those of mean ocean δ 18 O sw, owing to the past sea-level changes on glacial-interglacial timescale. Calculated values of δ 18 O sw-ss refl ect a more saline condition during high local summer insolation(SI) periods. Such correspondence between δ 18 O sw-ss and local SI in the WPWP may refl ect complex interaction between ENSO and monsoon, which was stimulated by changes in solar irradiance and their infl uence on the local hydrologic cycle. This then caused a striking reorganization of atmospheric circulation over the WPWP.     

The seasonal foot printing mechanism of spring Arctic sea ice in the Bergen climate models

The influence of spring Arctic sea ice variability on the Pacific Decadal Oscillation(PDO) like sea surface temperature(SST) variability is established and investigated using an Atmosphere Ocean General Circulation Model(AOGCM) of the Bergen Climate Model version 2(BCM2). The spring Arctic sea ice variability affects the mid-latitudes and tropics through the propagation of the anomalous Eliassen-Palm(E-P) flux from the polar region to mid- and low-latitudes during boreal spring. The pathway includes anomalous upward wave activity, which propagates to the high troposphere from near the surface of the polar region, turns southward between 500 h Pa and 200 h Pa and extends downward between 50°N and 70°N, influencing the near surface atmospheric circulation. The alteration of the near surface atmospheric circulation then causes anomalous surface ocean circulation. These circulation changes consequently leads to the SST anomalies in the North Pacific which may persist until the following summer, named seasonal "foot printing" mechanism(SFPM).