自行走隧道掘进机行进对地表沉降的理论分析

通过对自行走式隧道掘进机在地下爬坡过程中引起的地表变形进行了研究,结果表明：掘进机行进轨迹的纵向沉降曲线与随机介质理论预计的沉降曲线接近;在自行走掘进机埋深较浅时,横断面沉降曲线与Peck理论正态分布曲线误差较大,周向增阻结构嵌入土体能够造成地表土体的隆起。     

地学三维模型光照与动态显示

介绍了一种具有真实感的地学三维模型光照显示的新方法,给出了三角网构建和曲面样条函数插值方法,讨论了适应三维模型光照显示的可见性测试、光照模型等算法和方法,实现了模型动态显示和剖面绘制。     

南极半岛东北海域表层沉积有机质来源及其沉积环境

采用气相色谱-质谱技术对南极半岛东北海域海底表层沉积物的总有机碳、有机质碳同位素(δ13 Corg)和生物标志化合物等进行了测试分析。研究区表层沉积物总有机碳TOC平均值高于现代深海沉积物中的平均含量。δ13 Corg的变化说明该海域有机碳来源呈海洋水生生物来源和陆源混合的特征。正构烷烃的峰型分布、主峰碳、饱和烃轻重比C-21/C+22和(C21+C22)/(C28+C29)、甾烷组合和藿烷组合证实研究区西部表层沉积物有机质来源以陆源高等植物为主,其陆源可能来自于附近的南极半岛和南舍得兰群岛;研究区东部表层沉积物有机质来源偏以海源为主,且以低等浮游生物、藻类及细菌生物等海源输入为主。碳优势指数(Carbon preference index,CPI)、奇偶优势指数(Odd-even Predominance,OEP)和甾烷C29ααα20S/(20S+20R)比值显示研究区D1-7站位和D5-9沉积物有机质演化程度较高,D5-2和D2-4站位的有机质演化程度低,其他站位介于中间状态。饱和烃中姥鲛烷、植烷及其比值(Pr/Ph)等组合显示研究区西部以氧化-弱还原的沉积环境为主,其可能是受高温低盐别林斯高晋海水流和附近火山喷发的影响所致;研究区东部以还原—强还原沉积环境为主,可能是受低温高盐的威德尔底层水(WSBW)和威德尔海深层水(WSDW)影响所致。     

唐山地区干旱演变特征分析

研究区地处干旱和湿润气候的过渡地带,这一地区导致干旱发生的直接原因是干旱的气候和水资源的短缺,主要就是降水量的偏少.从简单实用角度考虑,本文根据唐山地区1956～2005年的水文和气象资料,采用降水距平、径流系数、她表湿润度指数等指标对唐山地区的干旱演变趋势进行分析,揭示出该地区近50年的干旱演变特征.     

油田地面工程地理信息系统的设计与开发

根据油田地面集输数据的分布特点,采用SuperMap空间数据处理技术和二三维一体化技术,并紧密结合数字油田和物联网理念,探索与研究基于数据层、服务层和应用层的Browse/Servre模式油田地面工程地理信息系统,旨在为油田集输管理提供基础依据,提高油田事故预警、投资决策的科学性。     

基于三维激光扫描技术的岩质边坡泥化夹层空间分布和几何形态

为了定量研究泥化夹层的空间分布和几何形态,以云南省玉溪市生活垃圾焚烧发电厂高边坡局部开挖剖面为对象,利用徕卡ScanStation C10三维激光扫描仪和瑞典ROMER RA-7520-2六轴关节臂三维测量仪进行扫描,得到了开挖剖面和泥化夹层的原始点云数据;然后采用Cyclone和Geomagic Wrap软件对点云数据进行一系列处理,分析了泥化夹层的三维空间分布、层面产状、间距、层面粗糙度和几何形态。结果表明：大部分泥化夹层横向分布于整个扫描剖面,少数呈局部分布;泥化夹层的平均倾向为196.41°±5.51°,平均倾角为22.27°±2.23°,间距在3.7~49.1 cm之间,平均值为（20.4±12.0）cm;不同层位及同一层位不同横向位置的泥化夹层厚度都不等,最厚约20 mm,最薄小于1 mm;泥化夹层顶面局部典型区域的平面拟合偏差在-22.4~32.5 mm之间,沿夹层倾向的粗糙度系数在5.67~16.77之间,平均值为10.11±3.25;泥化夹层的表面积与体积之比在5.14~5.86 cm^-1之间。运用三维激光扫描技术研究泥化夹层的空间分布和几何形态是可行的。玉溪市生活垃圾焚烧发电厂高边坡的泥化夹层具有宏观整体上相对平直、相互近似平行、非等距分布、间距小、层数多、厚度薄,细观上顶面粗糙底面相对光滑、三维形态复杂的特点。     

Prediction of hydrodynamic loading on a mini TLP with free surface effects

This paper describes the extension of a fluid-flow simulations method to capture the free surface evolution around a full-scale Tension Leg Platform (TLP). The focus is on the prediction of the resulting hydrodynamic loading on the various elements of the TLP in turbulent flow conditions and, in particular, on quantifying the effects of the free surface distortion on this loading. The basic method uses finite-volume techniques to discretize the differential equations governing conservation of mass and momentum in three dimensions. The time-averaged forms of the equations are used, and the effects of turbulence are accounted for by using a two-equation, eddy-viscosity closure. The method is extended here via the incorporation of surface-tracking algorithm on a moving grid to predict the free-surface shape. The algorithm was checked against experimental measurements from two benchmark flows: the flow over a submerged semi-circular cylinder and the flow around a floating parabolic hull. Predictions of forces on a model TLP were then obtained both with and without allowing for the deformation of the free surface. The results suggest that the free surface effects on the hydrodynamic loads are small for the values of Froude number typically encountered in offshore engineering practice.     

琼东南盆地深水区构造热演化特征及其影响因素分析

To reveal the tectonic thermal evolution and influence factors on the present heat flow distribution, based on 154 heat flow data, the present heat flow distribution features of the main tectonic units are first analyzed in detail, then the tectonic thermal evolution histories of 20 profiles are reestablished crossing the main deep-water sags with a structural, thermal and sedimentary coupled numerical model. On the basis of the present geothermal features, the Qiongdongnan Basin could be divided into three regions: the northern shelf and upper slope region with a heat flow of 50–70 m W/m2, most of the central depression zone of 70–85 m W/m2, and a NE trending high heat flow zone of 85–105 m W/m2 lying in the eastern basin. Numerical modeling shows that during the syn-rift phase, the heat flow increases generally with time, and is higher in basement high area than in its adjacent sags. At the end of the syn-rift phase, the heat flow in the deepwater sags was in a range of 60–85 m W/m2, while in the basement high area, it was in a range of 75–100 m W/m2. During the post-rift phase, the heat flow decreased gradually, and tended to be more uniform in the basement highs and sags. However, an extensive magmatism, which equivalently happened at around 5 Ma, has greatly increased the heat flow values, and the relict heat still contributes about 10–25 m W/m2 to the present surface heat flow in the central depression zone and the southern uplift zone. Further analyses suggested that the present high heat flow in the deep-water Qiongdongnan Basin is a combined result of the thermal anomaly in the upper mantle, highly thinning of the lithosphere, and the recent extensive magmatism. Other secondary factors might have affected the heat flow distribution features in some local regions. These factors include basement and seafloor topography, sediment heat generation, thermal blanketing, local magmatic injecting and hydrothermal activities related to faulting and overpressure.     

基于无人船的大洋中尺度涡观测系统展望

中尺度涡在大洋中普遍存在,研究发现其能量比大尺度海洋环流的能量大一个量级,在海洋物质能量输运和全球气候变化中起着重要的作用。受观测条件限制,目前对中尺度涡的观测主要通过卫星高度计实现,只能从海面高度来推算中尺度涡大小、分布、强度及其伴随的水体和能量输送,而卫星高度计对中尺度涡垂直结构特征认识不足,也导致了对中尺度涡所引起的上层海洋能量、热量输送估计误差偏大。目前对中尺度涡三维结构观测认识不足,展望未来将会出现基于无人船平台的大洋中尺度涡三维结构自动观测系统,该平台将集成自动水下剖面观测功能等先进技术,以便观测中尺度涡的垂直结构特征及其时空变化特征,进而可对中尺度涡带来的物质和能量输送进行系统认识。