利用南极走航观测评估卫星遥感海表面温度

利用1989-2005年间南极走航观测的海表面温度,对目前3个主要的卫星反演的SST产品AVHRR(Advanced Very High Resolution Radiometer),TMI(TRMM Microwave Imager)和AMSR-E(Advanced Microwave Scanning Radiometer for the Earth Observing System)进行了较为系统的评估,并着重检验了它们在南大洋的准确性.结果表明,AVHRR SST比观测数据偏冷,白天的偏差为-0.12℃,夜晚的偏差为-0.04℃,而且南大洋的冷偏差更为显著.TMI SST比观测数据明显偏暖,白天的偏差为0.48℃,夜晚的偏差为0.57℃,其温差ΔT受37GHz风速影响,在强风速(>6m/s)下这种影响仍然存在.AMSR-ESST比观测数据偏暖,白天的偏差为0.34℃,夜晚的偏差为0.27℃,而且南大洋的暖偏差相对较大.AMSR-E SST温差受水汽影响,并在南大洋随着水汽的增加而增加.通过进一步比较微波(AMSR-E和TMI)和红外(AVHRR)遥感的SST在2004年北半球冬季(即南半球夏季)的差别,发现微波遥感在热带(15°S-15°N)和南大洋区域(45°S以南)比红外遥感偏暖,而且在南大洋区域的偏差相对较大,相反在北半球中纬度区域(15°~40°N)偏冷.AMSR-E与AVHRR SST的温差,从白天到夜晚有减小的趋势,而TMI与AVHRR SST的温差无明显的变化.     

不同海区石英悬浮体颗粒表面微结构特征及其成因

悬浮石英颗粒表面在不同的水动力环境中会形成一些特有的表面结构,对这些特点的研究有助于理解微小颗粒在水中的行为以及沉积环境的变化。基于对在不同海区采取表层和不同深度的悬浮石英颗粒表面结构的扫描电镜的观察, 发现在水动力较强的南海海域石英颗粒表面大多呈现出机械作用成因的结构,化学溶蚀痕迹不明显;马六甲海峡、孟加拉湾南部海域、阿拉伯海东部海域站位石英颗粒表面开始出现明显的化学溶蚀痕迹,为机械-化学溶蚀作用的结果;莫克兰海沟站位表层样品石英颗粒表面化学溶蚀作用强烈,随着深度的增加,溶蚀作用减弱,200m水深以下,石英颗粒表面的结构主要为机械-化学溶蚀作用的结果。中国南海西南部3号站位、马六甲海峡北部7号站位以及孟加拉湾南部的11号站位的表层石英悬浮体颗粒较大,可以达到10μm左右,大于其他海区的石英颗粒(3～4μm)。研究海区海水中悬浮体石英颗粒大都呈现棱角状,表现为近源沉积,偶尔可见磨圆度较好且表面有新月形撞击坑,推测可能为风尘沉积。     

Sedimentary control on the formation of a multi-superimposed gas system in the development of key layers in the sequence framework

Based on core observations, well logs and test results of siderite-bearing mudstone from the Benxi Formation to the Member 2 of the Shanxi Formations in the Linxing block, northeastern Ordos Basin, a logging identification model for siderite-bearing mudstone (key layer) was established. The porosity characteristics and sealing property were quantitatively evaluated by logging data. Sedimentary control on the formation of multi-superimposed gas-bearing system in the development of key layers in the sequence framework was also discussed. The results showed that the siderite-bearing mudstone has obvious logging response characteristics, e.g., high photoelectric absorption cross-section index (PE), high density (DEN), high amplitude natural gamma ray (GR), low acoustic (AC), low resistivity (M2RX) and low neutron porosity (CNCF). The quantitatively evaluated results of the porosity characteristics and sealing property for the key layer showed that the key layer has the characteristics of low porosity (with an average of 1.20 percent), low permeability (with an average of 2.29 × 10⁻⁸μm²), and high breakthrough pressure (with an average of 12.32 MPa) in the study area. This layer acts as an impermeable gas barrier in a multi-superimposed gas system. The results also indicated that the material composition of the multi-superimposed gas-bearing system can be established by the sequence stratigraphic framework. The sedimentary evolution results in a cyclic rhythm of material composition vertically. The spatial distribution of the corresponding transgressive event layer near the maximum flooding surface (MFS) in the sequence framework restricts the spatial distribution of the key layer with high breakthrough pressure and low porosity, which constitutes the gas-bearing system boundary. The siderite-bearing mudstone formed near the MFS in the second-order sequence and constitutes a stable comparison of the first-order gas-bearing system boundary, which has a wide range of regional distribution and stable thickness. The siderite-bearing mudstone formed near the MFS in the third-order sequence is often incompletely preserved due to the late (underwater) diversion channel erosion and cutting. This layer forms the coal-bearing reservoirs, which we termed as a second-order gas-bearing system in adjacent third-order sequences to form a uniform gas-bearing system.     

Contrasting hydrography and phytoplankton distribution in the upper layers of cyclonic eddies in the Mozambique Basin and Mozambique Channel

Hydrographic data collected in cyclonic eddies in the Mozambique Channel and Basin revealed notable differences in temperature and salinity at a depth of 100 m, the upper mixed layer, the nitracline depths, and vertical distribution of chlorophyll-a (Chl-a). Differences in temperature and salinity did not show any consistent patterns. In contrast, the differences in the upper mixed layer, nitracline depths and the vertical Chl-a profile appeared to be driven by combined effects of eddy dynamics (i.e. shoaling of isopleths) and the seasonal variation in light availability and mixing conditions in the upper layers. Cyclonic eddies studied during austral spring and summer in the Mozambique Channel exhibited shallower upper mixed layers and nitracline depths, and deeper euphotic zones. Distinct subsurface Chl-a maxima (SCM) were associated with the stratified conditions in the upper layers of these eddies. In contrast, a cyclonic eddy studied during mid-austral winter in the Mozambique Basin had a shallower euphotic zone, deeper upper mixed layer and uniform Chl-a profiles. Another eddy sampled in the Mozambique Basin toward the end of winter showed a less pronounced SCM and roughly equal euphotic zone and upper mixed layer depths, suggestive of a transition from a well-mixed upper layer during winter to stratified conditions in summer.     

The prediction of traveling jet trenching in stiff clay based on the erosion failure mechanism

The performance of traveling jet trenching in stiff clay was tested. All the key parameters varied in the experiment, including the jet velocity, the shear strength of clay, the diameter of the nozzle, and the translational velocity of the nozzle. The jet–soil interface was found to be an arc. An equation was given to describe the interface. On the basis of the erosion failure mechanism, a new method is presented for predicting jet trenching depth. We first calculated the trajectory of the jet–soil interface and then predicted the distribution of the boundary layer shear stress along the jet–soil interface. The point where the wall shear stress was equal to the critical shear strength of clay was the ultimate trenching depth. The predictive results were found to fit the experimental results well.     

Climate driven changes in subtidal kelp forest communities in NW Spain

Reconstructions suggest a massive decline of nearly 1400 ha of kelp forest in North Western Spain in 2007. In line with global rising temperatures, we hypothesized that Sea Surface Temperature (SST) surpassed a lethal threshold for kelp. We examined whether changes in SST correlated to the proposed decline in kelp forest. All investigated SST characteristics suggested to affect kelp abundance increased significantly during the past thirty years, reaching extreme values during the last decade. In addition over the past two decades, the landscape formerly dominated by both cold and warm temperate canopy forming and understory species changed to one dominated by warm temperate understory species, resulting in a loss of vertical community structure. Fisheries landing data of kelp associated species was used to support the suggested change in kelp abundance. Subsequent recovery of the kelp appears to be occurring in deeper waters.     

Appraisal of storm beach buffer width for cyclonic waves

The loss of beach sand from berm and dune due to high waves and surge is a universal phenomenon associated with sporadic storm activities. To protect the development in a coastal hazard zone, hard structures or coastal setback have been established in many countries around the world. In this paper, the requirement of a storm beach buffer, being a lesser extent landward comparing with the coastal setback to ensure the safety of infrastructures, is numerically assessed using the SBEACH model for three categories of wave conditions in terms of storm return period, median sand grain size, berm width, and design water level. Two of the key outputs from the numerical calculations, berm retreat and bar formation offshore, are then analysed, as well as beach profile change. After having performed a series of numerical studies on selected large wave tank (LWT) test results with monochromatic waves using SBEACH, we may conclude that: (1) Berm erosion increases and submerged bar develops further offshore as the storm return period increases for beach with a specific sand grain size, or as the sand grain reduces on a beach under the action of identical wave condition; (2) Higher storm waves yield a large bar to form quicker and subsequently cause wave breaking on the bar crest, which can reduce the wave energy and limit the extent of the eroding berm; (3) A larger buffer width is required for a beach comprising small sand grain, in order to effectively absorb storm wave energy; and (4) Empirical relationships can be tentatively proposed to estimate the storm beach buffer width, from the input of wave conditions and sediment grain size. These results would benefit a beach nourishment project for shore protection or design of a recreational beach.     

Automatic tracing of the foot of the continental slope

The UNCLOS III (Article 76, Section 4(b)) defines the foot of the continental slope as the point of maximum change in the gradient at its base. It is impossible to locate so defined afoot and thus to trace the foot‐line objectively by eye. In this study we show a method designed automatically to detect and trace the foot‐line of the continental slope from an irregular array of bathymetrical data. Our algorithm first transforms the bathymetric surface to a maximum curvature surface. On this new surface, the foot‐line corresponds to one of the ridges; instead of tracing the foot‐line on the bathymetric surface, we now can trace the ridges on the maximum curvature surface. The tracing of the ridges can be done automatically and objectively and the foot‐line is identified as being one of these ridges. We devote particular attention to the case when the ridge‐line is not defined, i.e., to the case when the point of maximum gradient change becomes a region of maximum gradient change.     

Implementation of Tidal Constituent Interpolation Method for the Israeli Coastline

Many ship-borne geodetic surveys at sea, such as Global Navigation Satellite System (GNSS)-based sea surface height (SSH) observation, acoustic profiling of the bottom, and others, deal with a dynamic topography which undergoes several changes during the survey campaign (e.g., changes in tide, salinity and currents). Those changes affect the measurements and may causes for some variations in the results. There are several methods for tidal variations correction, being the most dominant phenomena, such as tidal zoning, tidal constituent interpolation or ocean tidal models. In this study, we have implemented the tidal constituent interpolation method for the Israeli coastline in order to assess its quality and determine whether it is suitable for use in this particular region. This paper depicts the interpolation method, discusses some difficulties in the implementation for the Israeli coast and presents results from exemplary processing. In addition, we compare the results to those obtained using global and regional tidal models.     

Intertidal sand‐dwelling Peracarid fauna of North Island,New Zealand

Abstract

Substrate and infauna samples were taken at four tidal levels (mean high water springs, high mid beach, low mid beach, and mean low water neaps) with a 0.0625 m² quadrat at 14 North Island beaches in New Zealand. The distributions of Peracarida (Crustacea) were correlated with sediment type, tidal height, and degree of exposure; sampling began in March 1972 and was completed in November 1973.

Substrate samples were sieved and median diameter of the particles ranged from very coarse sand of — 0.60? to very fine sand of + 3.259?. Substrates were variously sorted: ? quartile deviation ranged from 0.14? to 0.66?, skewness from ‐ 0.08? to + 0.07?.

Peracarid fauna was moderately abundant; the maximum value was 720 animals per square metre on a fully exposed beach. Highest average abundance (303 per square metre) for the 14 beaches was recorded from the mean low water neap station. Amphipoda was the dominant group (54% of all Peracarida recorded), followed by Isopoda (33%) and Cumacea (13%). Frequency of occurrence at the 56 stations was headed by Amphipoda (64%), followed by Isopoda (46%), and Cumacea (20%).

The results are compared with data from Stewart Island beaches, and the biogeographical distributions of recorded Peracarida are discussed. An unexpectedly high degree of endemism exists for a warm‐temperate region, caused by the isolation of New Zealand, which has no direct shallow water contact with tropical or cold temperate regions.