Characterizing hydrological processes within kettle holes using stable water isotopes in the Uckermark of northern Brandenburg,Germany

Understanding the hydrologic connectivity between kettle holes and shallow groundwater, particularly in reaction to the highly variable local meteorological conditions, is of paramount importance for tracing water in a hydro(geo)logically complex landscape and thus for integrated water resource management. This article is aimed at identifying the dominant hydrological processes affecting the kettle holes' water balance and their interactions with the shallow groundwater domain in the Uckermark region, located in the north-east of Germany. For this reason, based on the stable isotopes of oxygen (δ¹⁸O ) and hydrogen (δ²H ), an isotopic mass balance model was employed to compute the evaporative loss of water from the kettle holes from February to August 2017. Results demonstrated that shallow groundwater inflow may play the pivotal role in the processes taking part in the hydrology of the kettle holes in the Uckermark region. Based on the calculated evaporation/inflow (E/I) ratios, most of the kettle holes (86.7%) were ascertained to have a partially open, flow-through-dominated system. Moreover, we identified an inverse correlation between E/I ratios and the altitudes of the kettle holes. The same holds for electrical conductivity (EC) and the altitudes of the kettle holes. In accordance with the findings obtained from this study, a conceptual model explaining the interaction between the shallow groundwater and the kettle holes of Uckermark was developed. The model exhibited that across the highest altitudes, the recharge kettle holes are dominant, where a lower ratio of E/I and a lower EC was detected. By contrast, the lowest topographical depressions represent the discharge kettle holes, where a higher ratio of E/I and EC could be identified. The kettle holes existing in between were categorized as flow-through kettle holes through which the recharge takes place from one side and discharge from the other side.     

黑河地区高分辨陆地分类的综合分析

本文综合了国内外诸种有关资料,借鉴了国际上较通用的下垫面特征分类标准,也结合黑河地区下垫面的实际情况,对HEIFE试验区及其邻近地区的下垫面特征(包括地表特征、土壤特征及地形高度)进行归纳分类,形成了两种高分辨率(分别约为6km×6km及3km×3km)的下垫面特征的格点化资料,可供该地区地气相互作用研究用。     

玉树隆宝2014年冬季冻土积雪对陆气通量关键参数的影响分析

利用玉树隆宝湿地的观测资料,分析了未冻结、冻结和冻结有积雪覆盖三种情况下动量通量和感热通量的日变化情况,计算了三种情况下动量总体输送系数、感热总体输送系数、动力学粗糙度和热力学粗糙度,分析了附加阻尼和粗糙度雷诺数的关系,并将三种附加阻尼的参数化方案进行了比较,结果表明:冻结状态下动量通量和感热通量的日变化幅度最大,冻结有积雪覆盖时,动量通量和感热通量的日变化幅度最小。动量总体输送系数C_D和感热总体输送系数C_H的值在冻结时最大,冻结有积雪覆盖时最小,动力学粗糙度和热力学粗糙度在冻结状况下最小,冻结有积雪覆盖时最大。未冻结、冻结和冻结有积雪覆盖状态下,三种附加阻尼kB~(-1)参数化方案中,幂函数型方案较为合适。     

青藏高原地表反照率计算研究

根据改进的甚高分辨率扫描辐射仪（ＡＶＨＲＲ）５个观测波段的光谱特征，经多次试验，设计了一组从卫星观测的地－气系统的辐射测值中提取晴空资料的多通道门槛值判识法和提取月平均反照率的合成法；并对１９９２年ＮＯＡＡ－１２卫星获取的ＡＶＨＲＲ资料进行计算处理，分析提取晴空数据，在此基础上按卫星轨道覆盖周期合成计算得到的晴空行星反照率和地表反照率，并且计算了逐月的地表反照率。对计算结果做了初步分析和认真比较。     

210Po法在粤北青障山地区花岗岩型铀矿找矿中的应用研究

为扩大粤北花岗岩型铀矿找矿成果,以青嶂山矿集区1:5万210Po测量数据为依据,研究了210Po法在粤北花岗岩型铀矿找矿中的异常特征及应用效果。结合研究区地质特征,应用趋势面分析等数理统计方法对数据进行处理,结果表明:趋势面分析消除了不同铀含量的地质背景对提取210Po异常的影响;210Po法与地面伽马能谱、氡气测量、 AMT组合应用对寻找花岗岩区深部隐伏矿体具有良好的效果,多种测量方法均出现峰值的部位,为含矿构造带或铀矿体产出部位;经钻探工程验证,在210Po法及相关方法异常区揭露到铀矿工业矿段,210Po法在粤北花岗岩型铀矿勘查中具有较大的指导意义。     

渭河流域地表水可利用量分析计算

地表水可利用量是流域和区域水资源规划的重要指标.本文应用断面过流量减去河道内生态需用水量与河道外难控制利用弃水量,并扣除二者间重复计算量的算法,利用华县、状头两个水文站断面实测和统计数据,分析计算渭河多年平均地表水可利用量为54.91亿～66.33亿m~3/a.     

高分五号全谱段光谱成像仪地表温度与发射率反演

地表温度在全球能量平衡和气候变化研究中具有重要意义。中国新一代高分辨率卫星高分五号卫星(GF-5)搭载的全谱段成像光谱仪有4个40 m空间分辨率的热红外波段,可以提供高空间分辨率的地表温度信息。本文提出了适用于全谱段成像光谱仪的温度与发射率分离TES(Temperature and Emissivity Separation)算法同时反演地表温度和发射率,为了提高大气校正精度,算法加入了水汽缩放WVS(Water Vapor Scaling)大气校正方法。首先利用Seebor V5.0全球大气廓线库构建模拟数据对算法精度进行了评价;然后利用张掖地区11景ASTER影像作为替代数据和同步的地面实测数据对算法精度进行了验证。模拟数据结果表明加入WVS方法后TES算法反演地表温度的RMSE由2.59 K降低到1.54 K,4个波段地表发射率的RMSE分别从0.122、0.12、0.102和0.037降低到0.042、0.04、0.028和0.026;地表验证结果表明本文算法反演的地表温度与站点实测值具有更好的一致性,平均Bias由1.08 K降低到0.47 K,RMSE由2.17 K降低到1.7 K;反演的各波段地表发射率与地面实测结果误差均小于1%。因此,本文提出的温度与发射率分离算法具有较高精度,可以利用GF-5数据获取高精度高空间分辨率的地表温度和发射率数据,服务于其他相关研究。     

黑河实验区地表净辐射区域分布及季节变化

利用卫星遥感信息和地面观测资料，分析研究黑河实验区地表净辐射的区域分布及季节变化特征。结果表明，卫星遥感结合地面观测，首先可以得到较为精确的地表反射率和地表温度分布，进而得到较为合理的地表净辐射的区域分布和季节变化特征。     

盆地模拟技术中的化学动力学生烃模型与应用

油气地表化探数据的失真(特别是数据中的高值失真点)直接影响到化探异常圈定。本文根据油气地表化探数据的分布特点，利用概率统计原理，提出一种适合油气化探资料前期处理的失真数据的概率判定方法和处理手段，在对实际资料的应用中，取得了良好的效果。     

Analysis of the contributions of topographic,soil, and vegetation features on the spatial distributions of surface soil moisture in a steep natural forested headwater catchment

Surface soil moisture has been extensively studied for various land uses and landforms. Although many studies have reported potential factors that control surface soil moisture over space or time, the findings have not always been consistent, indicating a need for identification of the main factors. This study focused on the static controls of topographic, soil, and vegetation features on surface soil moisture in a steep natural forested headwater catchment consisting of three hillslope units of a gully area, side slope, and valley‐head slope. Using a simple correlation analysis to investigate the effects of the static factors on surface soil moisture at depths of 0–20 cm at 470 points in 13 surveys, we addressed the characteristics of surface soil moisture and its main controlling factors. The results indicated that the mean of surface soil moisture was in the decreasing order of gully area > valley‐head slope > side slope. The relationship between the mean and standard deviation of surface soil moisture showed a convex‐upward shape in the headwater catchment, a negative curvilinear shape in the gully area, and positive curvilinear shapes at the side and valley‐head slopes. At the headwater catchment and valley‐head slope, positive contributions of soil porosity and negative contributions of slope gradient and saturated hydraulic conductivity were the main controlling factors of surface soil moisture under wetter conditions, whereas positive contributions of topographic wetness index and negative contributions of vegetation density were the main controlling factors of surface soil moisture under drier conditions. At the side slope underlain by fractured bedrocks, only saturated hydraulic conductivity and vegetation density were observed to be the controlling factors. Surface soil moisture in the gully area was mainly affected by runoff rather than were static features. Thus, using hillslope units is effective for approximately estimating the hydrological behaviours of surface moisture on a larger scale, whereas dependency between the main static factors and moisture conditions is helpful for estimating the spatial distributions of surface moisture on a smaller scale.