人造地震动反应谱的非线性拟合

为了进一步提高人造地震动时程对目标反应谱的拟合精度和效率,本文提出了一种人造地震动反应谱非线性拟合方法.在人造地震动反应谱非线性拟合过程中,认为Fouricr幅值谱与反应谱调整项之间满足非线性(幂指数)关系.通过比例拉伸和折叠等数值技巧以促使模拟加速度向目标加速度逼近.算例分析结果表明,人造地震动反应谱非线性拟合方法具...     

大巴山弧形构造带中段渔渡地区侏罗纪叠加变形研究

大巴山构造带是秦岭造山带南部发育的一个以逆冲推覆构造为特征的构造带。通过在大巴山弧形构造带中段渔渡地区进行的详细构造解析发现,大巴山构造带在侏罗纪以来经历了至少两期变形叠加,变形地层三叠系嘉陵江组—侏罗系沙溪庙组。早期变形以与滑脱构造相关的轴向北西—北北西向箱状或隔挡状褶皱为主,并在深部发育顺层滑脱构造,变形时代为晚侏罗世到早白垩世。晚期变形与北侧逆冲相关,导致右行走滑变形,主要形成右行走滑断层和北西—北北西向紧闭褶皱,变形时代比第一期稍晚,为晚侏罗世之后到早白垩世。两期变形形成的褶皱延伸方向一致,与区域构造线的方向协调,而且在远离北侧镇巴断裂的地区变形强度有减弱的趋势,两期变形叠加形成共轴或斜交叠加构造。研究表明,变形与大巴山冲断—推覆构造带向南逆冲有关。     

The Cretaceous Songliao Basin: Volcanogenic Succession, Sedimentary Sequence and Tectonic Evolution, NE China

The Songliao basin (SB) is a superposed basin with two different kinds of basin fills. The lower one is characterized by a fault-bounded volcanogenic succession comprising of intercalated volcanic, pyroclastic and epiclastic rocks. The volcanic rocks, dating from 110 Ma to 130 Ma, are of geochemically active continental margin type. Fast northward migration of the SB block occurred during the major episodes of the volcanism inferred from their paleomagnetic information. The upper one of the basin fill is dominated by non-marine sag-style sedimentary sequence of siliciclastics and minor carbonates. The basin center shifted westwards from the early to late Cretaceous revealed by the GGT seismic velocity structure suggesting dynamic change in the basin evolution. Thus, a superposed basin model is proposed. Evolution of the SB involves three periods including (1) Alptian and pre-Aptian: a retroarc basin and range system of Andes type related to Mongolia-Okhotsk collisional belt (MOCB); (2) Albian to Companian: a sag-like strike-slip basin under transtension related to oblique subduction of the Pacific plate along the eastern margin of the Eurasian plate; (3) since Maastrichtian: a tectonic inverse basin under compression related to normal subduction of the Pacific plate under the Eurasian plate, characterized by overthrust, westward migration of the depocenter and eastward uplifting of the basin margin.     

Impact of mechanical anisotropy and power-law rheology on single layer folding

The infinitesimal and finite stages of folding in nonlinear viscous material with a layer-parallel anisotropy were investigated using numerical and analytical methods. Anisotropy was found to have a first-order effect on growth rate and wavelength selection, and these effects are already important for anisotropy values (normal viscosity/shear viscosity) < 10. The effect of anisotropy must therefore be considered when deducing viscosity contrasts from wavelength to thickness ratios of natural folds. Growth rates of single layer folds were found to increase and subsequently decrease during progressive deformation. This is due to interference between the single layer folds and chevron folds that form in the matrix as a result of instability caused by the anisotropic material behaviour. The wavelength of the chevron folds in the matrix is determined by the wavelength of the folded single layer, which can explain the high wavelength to thickness ratios that are sometimes found in multilayer sequences. Numerical models including anisotropic material properties allow the behaviour of multilayer sequences to be investigated without the need for resolution on the scale of individual layers. This is particularly important for large-scale models of layered lithosphere.     

A case study of mesoscale convective band (MCB) development and evolution along a quasi-stationary front

This paper presents a case study of mesoscale convective band （MCB） development along a quasi-stationary front over the Seout metropolitan area.The MCB,which initiated on 1500 UTC 20 September 2010 and ended on 1400 UTC 21 September 2010,produced a total precipitation amount of 259.5 mm.The MCB development occurred during a period of tropopause folding in the upper level and moisture advection with a low-level jet.The analyses show that the evolution of the MCB can be classified into five periods：（1） the cell-forming period,when convection initiated; （2） the frontogenetic period,when the stationary front formed over the Korean peninsula; （3） the quasi-stationary period,when the convective band remained over Seoul for 3 h; （4） the mature period,when the cloud cover was largest and the precipitation rate was greater than 90 mm h-1; and （5） the dissipating period,when the MCB diminished and disappeared.The synoptic,thermodynamic,and dynamic analyses show that the MCB maintained its longevity by a tilted updraft,which headed towards a positive PV anomaly.Precipitation was concentrated under this area,where a tilted ascending southwesterly converged with a tilted ascending northeasterly,at the axis of cyclonic rotation.The formation of the convective cell was attributed in part by tropopause folding,which enhanced the cyclonic vorticity at the surface,and by the low-level convergence of warm moist air and upperlevel divergence.The southwesterly flow ascended in a region with high moisture content and strong relative vorticity that maintained the development of an MCB along the quasi-stationary front.     

安徽省滁州市琅琊山铜矿成矿规律与深部找矿

琅琊山铜矿为一广义上的层控夕卡岩型铜矿床,其关键控矿因素是S形旋扭褶皱构造,蘑菇状岩体形态及特定的赋矿层位.近年来利用人工受控定向钻探新技术在该地区开展的深部找矿,取得了很好找矿成果,证实了石英闪长玢岩体底部接触带的存在且具有良好的含矿性,对本区深部及外围找矿具有重要意义.     

安徽省潜山县韩长冲地区的地质构造特征

韩长冲地区主要由超高压变质岩、碱长花岗片麻岩、二长花岗片麻岩组成。前者包括超高压片麻岩、大理岩、榴辉岩和石英硬玉岩等。其中存在由黑云斜长片麻岩、石英硬玉岩、大理岩及层状榴辉岩组成的超高压变质表壳岩组合。超高压变质岩先后经过柯石英榴辉岩相、石英榴辉岩相、角闪岩相及绿片岩相多阶段的变质作用;经过榴辉岩相、角闪岩相、角闪岩相后及脆性等四期变形。其中角闪岩相变形形成本区的主要构造要素,以发育大量Ａ型褶皱及普遍的糜棱岩化为特征。碱长花岗片麻岩及二长花岗片麻岩只经过角闪岩相及其后的变质和变形作用。超高压变质岩与碱长花岗片麻岩呈侵入接触,可能沿缓倾向ＳＳＥ的韧性剪切带逆掩于二长花岗片麻岩之上。     

塔里木盆地西南缘山前带逆冲推覆构造特征

塔里木盆地西南缘山前带是西昆仑逆冲推覆构造在前陆形成的冲断带,主要由断层相关褶皱、双重构造、叠瓦状构造、三角带等构造组成。通过地表构造剖面、地震与非震资料的综合解释与研究,结合平衡剖面的正演方法,对该冲断带进行了几何学、运动学与动力学研究,对冲断带断层的扩展方式以及冲断时代进行了讨论。研究认为塔西南逆冲推覆构造具有"南北分带、东西分段以及垂向结构变异"的特点。自南向北分为逆冲推覆的根带、中带、锋带和反冲断裂带,由西向东可以划分为帕米尔弧形构造段、齐姆根弧形构造段、甫沙-克里阳三角带构造段与和田南逆冲推覆体构造段。冲断带在垂向结构上由三套区域性滑脱层划分为浅构造层次的外来系统断坡背斜、中构造层次的准原地系统双重构造、三角带构造以及深构造层次的原地系统弱变形带三层结构。冲断席内断层的扩展方式为前展式,而不同冲断席间则为后展式模式。冲断带自中新世中期开始形成,中新世末发生位移推覆,上新世—早更新世定型,中更新世—全新世隆升均衡调整。     

徐州地区冲断褶皱带研究

通过研究徐州地区构造的几何学特征,指出其构造为一薄皮型式的向北西逆掩的冲断褶皱带。其构造变形具有东西分带和南北分段的特征。东西可分为东部滑脱带、中部锋带和西部外缘带。这种分带性为在区内冲断层和推覆体下找煤指明了方向。锋带紧密的叠互式冲断层和褶皱与震旦系碳酸盐岩地层楔状体沿底部拆离带向北西滑脱有关。冲断褶皱带是在与郯庐断裂活动有关的挤压力和重力的联合作用下,形成于印支—燕山运动早期。