非饱和土的一种分类方法

根据理想模型中土颗粒和孔隙水之间的几何关系、热力学原理和土力学基本理论,研究了土的非饱和性在非饱和土中引起的力系。给出了张力吸力和吸力比的定义,并在考虑基质吸力作用面积的基础上定义了等效吸力的概念。按照孔隙水弯液面是否与土颗粒表面搭接,将非饱和土分为搭接非饱和土和不搭接非饱和土两类。进而根据搭接状态将搭接非饱和土细分为水封闭非饱和土和搭接双开敞非饱和土,根据孔隙气状态将不搭接非饱和土细分为不搭接双开敞非饱和土和气封闭非饱和土。在搭接非饱和土中,出现张力吸力并对土体的强度产生增强作用;在不搭接非饱和土中,表面张力只是沿着液面传播,不对土的强度产生效应。另外,张力吸力只对强度问题有贡献,它不是渗流问题的驱动力。     

一维稳态入渗时非饱和土基质吸力分布

雨水的入渗和蒸发对土体的其质吸力分布有着重要的影响作用。利用水相连续性条件、广义Darcy定律及Gardner关于非饱和土导水系数和基质吸力的经验公式,建立并求解出非饱和土一维稳态渗流情况下基质吸力沿深度变化的关系表达式。根据所解得的解析解,详细分析了在单一土层情况下参数α、入渗强度q和qlks对基质吸力分布的影响。     

Origin of high field strength element enrichment in volcanic arcs: Geochemical evidence from the Sulu Arc, southern Philippines

Lavas from the Sulu Arc, southern Philippines, exhibit an enrichment in high field strength elements (HFSE) that represents a departure from the typical volcanic arc geochemical signature. It has been postulated that this relative enrichment arises from metasomatism of mantle wedge peridotites by melts derived from the subducting oceanic lithosphere, through formation of amphibole which subsequently breaks down and enriches the mantle source of parental arc magmas in HFSE. Divergent chemical and isotopic characteristics between Sulu Arc HFSE-enriched lavas and the Sulu Sea crust being subducted—the presumed source of slab-derived melts—render it unlikely, however, that HFSE enrichment arises from the influence of such melts. New geochemical data suggest that the varying degrees of HFSE enrichment in Sulu Arc lavas are instead the result of variable amounts of mixing between enriched and depleted mantle end-components—the sources of South China Sea intraplate lavas and Sulu seafloor basalts, respectively—within a compositionally heterogeneous mantle wedge.     

西安地区马兰黄土的结构强度研究

对西安地区马兰黄土进行了单轴和常规三轴压缩试验,研究了含水量及围压对其结构强度的影响。结果表明,单轴条件下黄土结构强度随含水量增加呈线性减少,常规三轴条件下含水量和围压对其结构强度有着明显的影响。运用莫尔-库仑理论进一步研究了强度参数C、随含水量的变化规律,为西安地区地质灾害防治及工程设计提供依据。     

Influence of matric suction on shear strength behavior of a residual clayey soil

In this paper, the shear strength with respect to the matric suction of unsaturated soils was studied. For this purpose, unsaturated triaxial testing procedures were applied to the undisturbed residual soil specimens. An apparatus for performing triaxial tests was designed and constructed. In the tests, matric suction was controlled by using the axis translation technique, and pore water volume changes were measured by means of a volume change transducer with 10⁻⁸ m³ sensitivity. The test results indicated that the matric suction contributes to the shear strength of unsaturated soil specimens, and this contribution called suction strength varies non-linearly with respect to the matric suction. The logarithmic model needing to know the air-entry value and the internal friction angle of a soil specimen for prediction of the suction strength were presented and compared with the test results. It was found that suction strength values predicted from the proposed model were in satisfactory agreement with the experimental results.     

利用井径资料预测鱼卡煤田东部勘探区七煤顶板的稳定性

在煤田测井中，井径的变化对其它测井参数是一种干扰，但利用井径的相对变化值（井径扩大系数），可有效地评估岩石的强度等级和可采煤层顶底板的稳定性。统计鱼卡煤田东部勘探区29个钻孔孔径的变化值，按岩石抗压强度划分原则，将其七煤顶板稳定性划分为5个等级，据此固定了该煤田七煤顶板稳定性分布图。     

Convergence-control approach for rock tunnels reinforced by grouted bolts,using the homogenization concept

The scope of this paper is to introduce a method for the analysis of rock tunnels reinforced by grouted bolts, based on the convergence-control approach. The analytical formulations presented in this paper refers to an elasto-plastic behavior of the rock mass and the latest Hoek and Brown yield criterion (Version 2002). In order to model the reinforced plastic zone, the equivalent material approach was taken into account such that the apparent strength of the rock mass is improved as a consequence of the bolting effect. The general design guides and examples presented are intended to facilitate the comprehension and application of the proposed analytical solution in practice.     

Effect of brittle fracture on the rheological structure of the lithosphere and its application in the Ordos

An empirical formula for the fracture strength of the principal rock type in the lithosphere is obtained based on the experimental data from previous studies, in which the effects of the confining pressure, size of the rock sample, temperature, strain rate and the pore pressure are taken into account, the empirical formulae for the effects of them are also presented. By comparing the frictional strength to the fracture strength calculated using the new empirical formula, it is shown that frictional sliding is dominant in the upper crust but brittle fracture is dominant in the lower part of the crust and the lithosphere beneath the crust. Therefore the fracture mechanism must be taken into account in the study of the rheological structure of the lithosphere. The empirical formula for the fracture strength is applied to study the rheological structure of the lithosphere in the Ordos block. Brittle regime in the rheological structure can be divided into two sub-regions, in one of which brittle fracture and in the other frictional sliding are dominant, respectively, unlike previous conventional studies in which frictional sliding is assumed to be the only factor; the magnitude of the rheological strength of the lithosphere calculated by the empirical formula is also lower than that obtained in previous conventional studies.     

Landslide susceptibility mapping using GIS and digital photogrammetric techniques: a case study from Ardesen (NE-Turkey)

Ardesen is a settlement area which has been significantly damaged by frequent landslides which are caused by severe rainfalls and result in many casualties. In this study a landslide susceptibility map of Ardesen was prepared using the Analytical Hierarchy Process (AHP) with the help of Geographical Information Systems (GIS) and Digital Photogrametry Techniques (DPT). A landslide inventory, lithology–weathering, slope, aspect, land cover, shear strength, distance to the river, stream density and distance to the road thematics data layers were used to create the map. These layer maps are produced using field, laboratory and office studies, and by the use of GIS and DPT. The landslide inventory map is also required to determine the relationship between these maps and landslides using DPT. In the study field in the Hemsindere Formation there are units that have different weathering classes, and this significantly affects the shear strength of the soil. In this study, shear strength values are calculated in great detail with field and laboratory studies and an additional layer is evaluated with the help of the stability studies used to produce the landslide susceptibility map. Finally, an overlay analysis is carried out by evaluating the layers obtained according to their weight, and the landslide susceptibility map is produced. The study area was classified into five classes of relative landslide susceptibility, namely, very low, low, moderate, high, and very high. Based on this analysis, the area and percentage distribution of landslide susceptibility degrees were calculated and it was found that 28% of the region is under the threat of landslides. Furthermore, the landslide susceptibility map and the landslide inventory map were compared to determine whether the models produced are compatible with the real situation resulting in compatibility rate of 84%. The total numbers of dwellings in the study area were determined one by one using aerial photos and it was found that 30% of the houses, with a total occupancy of approximately 2,300 people, have a high or very high risk of being affected by landslides.