地面三维激光扫描技术在公路建模中的应用

为解决传统技术获取公路数据效率低,数据不够精确与详细的问题,本文提出了将地面三维激光扫描技术应用于公路建模的数据采集方案和数据处理方法。根据地面激光扫描的特点和公路建模要求,设计出按最佳扫描距离进行分段设站、分块扫描的数据采集方案。经过点云配准和滤波等预处理后,利用点云几何信息进行了数字表面模型、等高线、纵横断面等模型生成。本文以Trimble GS200地面三维激光扫描仪为例对高速公路路面进行数据采集,以Realworks Survey5.0作为建模工具进行路面建模。结果表明采集方案能提高获取原始数据的效率,并且保证了数据质量,降低了数据处理的复杂程度。     

Poro‐acoustoelasticity of fluid‐saturated rocks

We generalize the classical theory of acoustoelasticity to the porous case (one fluid and a solid frame) and finite deformations. A unified treatment of non‐linear acoustoelasticity of finite strains in fluid‐saturated porous rocks is developed on the basis of Biot’s theory. A strain‐energy function, formed with eleven terms, combined with Biot’s kinetic and dissipation energies, yields Lagrange’s equations and consequently the wave equation of the medium. The velocities and dissipation factors of the P‐ and S‐waves are obtained as a function of the 2nd‐ and 3rd‐order elastic constants for hydrostatic and uniaxial loading. The theory yields the limit to the classical theory if the fluid is replaced with a solid with the same properties of the frame. We consider sandstone and obtain results for open‐pore jacketed and closed‐pore jacketed ‘gedanken’ experiments. Finally, we compare the theoretical results with experimental data.     

Directional response of a reconstituted fine‐grained soil—Part II: performance of different constitutive models

In this paper, the performance of different advanced constitutive models for soils is evaluated with respect to the experimentally observed behaviour of a soft reconstituted clay subject to a wide range of loading directions, see (presented in the companion paper). The models considered include a three‐surface kinematic hardening elastoplastic model; the CLoE hypoplastic model; a recently proposed K‐hypoplastic model for clays, and an enhanced version of the same model incorporating the concept of intergranular strain. A clear qualitative picture of the relative performance of the different models as a function of the loading direction is obtained by means of the incremental strain response envelopes. The definition of suitable error measures allows to obtain further quantitative information in this respect. For the particular initial conditions and loading programme considered in this study, the kinematic hardening and the enhanced K‐hypoplastic models appear to provide the best performance overall. Copyright © 2006 John Wiley & Sons, Ltd.     

Hydrologic complexity and classification: a simple data reconstruction approach

Technological advances, by facilitating extensive data collection, better data sharing, formulation of sophisticated methods, and development of complex models, have brought hydrologic research to a whole new level. Despite these obvious advances, there are also concerns about their general use in practice. On the one hand, it is natural to develop more complex models than perhaps needed (i.e. representations having too many parameters and requiring too much data); on the other hand, it is often difficult to ‘translate’ results from one specific situation to another. Recent studies have addressed these concerns, albeit in different forms, such as dominant processes, thresholds, model integration, and model simplification. A common aspect in some of these studies is that they recognize the need for a globally agreed upon ‘classification system’ in hydrology. The present study explores this classification issue further from a simple phase‐space data reconstruction perspective. The reconstruction involves representation of the given multidimensional hydrologic system using only an available single‐variable series through a delay coordinate procedure. The ‘extent of complexity’ of the system (defined especially in the context of variability of relevant data) is identified by the ‘region of attraction of trajectories’ in the phase space, which is then used to classify the system as potentially low‐, medium‐ or high‐dimensional. A host of river‐related data, representing different geographic and climatic regions, temporal scales, and processes, are studied. Yielding ‘attractors’ that range from ‘very clear’ ones to ‘very blurred’ ones, depending on data, the results indicate the usefulness of this simple reconstruction concept for studying hydrologic system complexity and classification. Copyright © 2007 John Wiley & Sons, Ltd.     

基于ArcGIS Server的城市道路最短路径分析方法研究

ArcGIS Server是构建企业级分布式的GIS应用开发平台,基于ArcGIS Server这个开发平台,对实现城市道路最短路径的道路数据的组织、相关技术和方法作了初步的研究,并构建了试验环境,初步实现了B/S网络模式下城市道路最短路径的分析。     

地球自转日长变化(LOD)和大气角动量(AAM)所对应的动力系统

利用一个多分维的分形地应的一维映射可以用子波变换反演出来,对地自转日长（ＬＯＤ）资料和大气角动量（ＡＡＭ）资料进行子波变换说明,在２０年尺度上、周年尺度和２－３２年尺度上,ＬＯＤ和ＡＡＭ的突变时间基本一致,所反演出的不同层次上分岔时间的分段映射动力系统也极其相似。     

A new passive rolling‐pendulum vibration absorber using a non‐axial‐symmetrical guide to achieve bidirectional tuning

A new, passive, vibroprotective device of the rolling‐pendulum tuned mass damper type is presented that, relying on a proper three‐dimensional guiding surface, can simultaneously control the response of the supporting structure in two mutually orthogonal horizontal directions. Unlike existing examples of ball vibration absorbers, mounted on spherical recesses and effective for axial‐symmetrical structures, the new device is bidirectionally tuneable, by virtue of the optimum shape of the rolling cavity, to both fundamental structural modes, even when the corresponding natural frequencies are different, in such a case recurring to an innovative non‐axial‐symmetrical rolling guide. Based on Appell's non‐holonomic mechanics, a non‐linear dynamic model is first derived for the bidirectional absorber mounted on a 1‐storey 3‐degrees‐of‐freedom linear structure translating under the effect of both imparted base motion and applied dynamic forces. A laboratory‐scaled prototype of the device is then tested to experimentally demonstrate the bidirectional tuning capability and to validate the mathematical model. The design procedure and the seismic performance of the absorber are finally exemplified through numerical simulation. Copyright © 2009 John Wiley & Sons, Ltd.     

A hypoplastic model for mechanical response of unsaturated soils

A new constitutive model is developed for the mechanical behaviour of unsaturated soils based on the theory of hypoplasticity and the effective stress principle. The governing constitutive relations are presented and their application is demonstrated using several experimental data from the literature. Attention is given to the stiffening effect of suction on the mechanical response of unsaturated soils and the phenomenon of wetting‐induced collapse. All model parameters have direct physical interpretation, procedures for their quantification from test data are highlighted. Quantitative predictions of the model are presented for wetting, drying and constant suction tests. Copyright © 2008 John Wiley & Sons, Ltd.     

差动输出型力平衡加速度传感器设计与噪声测试

改进力平衡加速度传感器的机械设计和电路设计,使其幅频特性、动态范围、噪声等性能具有较大提升,且稳定性较好。该产品的实际测试结果证明其动态范围达到130 dB,能够满足强震动监测需求。     

多年冻土地区线性工程建设

多年冻土地区修筑建筑物、都会受到冻土稳定性的影响。冻胀、融沉以及由此带来的其它工程冻害问题必须得到重视，处理措施是否得当，直接关系到建筑物的运营安全，在北美及俄罗斯等高纬度多年冻土地区，从已修筑的铁路、公路及输油、气管道等线性工程建筑来看，有成功地的处理冻害的经验，也有对冻害认识不足而造成工程不能运营的失败经验，总结了这些既有工程的建设经验和工程问题治理措施，对我国多年冻土地区线性工程的建设，尤其对青藏铁路建设具有积极的指导意义。