俯冲-增生型造山带增生楔流体研究进展

俯冲－增生型造山带弧前增生楔流体的特点为：盐度低、氯化物含量异常低，并含有丰富的CO2和CH4。流体以扩散式或沿断层带渠道式活动；泥火山、张裂隙充填脉、碳酸盐壳、深海生物群是流体活动的直接体现；流体活动影响着增生楔的内部结构和构造样式；增生楔中流体活动特征的研究对研究造山带的地质演化及矿床成因具有重要意义。     

再论印度—亚洲大陆碰撞的启动时间

利用沉积响应来识别印度－亚洲大陆碰撞启动时间是最直接和有效的方法之一。西藏仲巴错江顶群被甄别为碰撞型三角洲沉积，曲下组可能代表了碰撞启动时期的建造，藏南定日的海相白垩－古近系沉积演化，锶和碳同位素变化也支持两大陆碰撞启动时间大约在K／T界线时期，对比喜马拉雅西段碰撞启动时间并考虑大印度北缘失掉的宽度，提出两大陆量可能的碰撞启动时间是65Ma左右。     

含柯石英超高压榴辉岩的早期变形--以苏北东海碱场榴辉岩体为例

以超高压矿物组合的各种后成合晶及冠状体等卸载不平衡结构为参考标志，将含柯石英的超高压榴辉岩的交形序列分成两个部分。后成合晶及冠状体发育之前的变形为早期变形，是在大陆深俯冲和碰撞条件下发育的超高压变质变形组构。后成合晶及冠状体发育之后的变形为晚期变形，是在超高压岩石折返剥露过程中，主要是在角闪岩相甚至绿片岩相条件下发育的。构造上江苏省北部东海县碱场合柯石英榴辉岩体，分为块状榴辉岩和面理化榴辉岩两种类型，分别代表超高压变质岩早期变形的两个构造阶段或世代(D1、D2)。详细描述了它们的矿物组合、中小尺度及显微尺度下的组构特征，讨论了两者的几何关系和区域构造意义，强调指出，只有含柯石英榴辉岩的早期变形组构，才能记录和反映斜向大陆深俯冲及碰撞的动力学过程。     

He and Ne isotopes in oceanic crust: implications for noble gas recycling in the mantle

In an attempt to determine the helium and neon isotopic composition of the lower oceanic crust, we report new noble gas measurements on 11 million year old gabbros from Ocean Drilling Program site 735B in the Indian Ocean. The nine whole rock samples analyzed came from 20 to 500 m depth below the seafloor. Helium contents vary from 3.3×10⁻¹⁰ to 2.5×10⁻⁷ ccSTP/g by crushing and from 5.4×10⁻⁸ to 2.4×10⁻⁷ ccSTP/g by melting. ³He/⁴He ratios vary between 2.2 and 8.6 Ra by crushing and between 2.9 and 8.2 by melting. The highest R/Ra ratios are similar to the mean mid-ocean ridge basalt (MORB) ratio of 8±1. The lower values are attributed to radiogenic helium from in situ α-particle production during uranium and thorium decay. Neon isotopic ratios are similar to atmospheric ratios, reflecting a significant seawater circulation in the upper 500 m of exposed crust at this site. MORB-like neon, with elevated ²⁰Ne/²²Ne and ²¹Ne/²²Ne ratios, was found in some high temperature steps of heating experiments, but with very small anomalies compared to air. These first results from the lower oceanic crust indicate that subducted lower oceanic crust has an atmospheric ²⁰Ne/²²Ne ratio. Most of this neon must be removed during the subduction process, if the ocean crust is to be recirculated in the upper mantle, otherwise this atmospheric neon will overwhelm the upper mantle neon budget. Similarly, the high (U+Th)/³He ratio of these crustal gabbros will generate very radiogenic ⁴He/³He ratios on a 100 Ma time scale, so lower oceanic crust cannot be recycled into either MORB or oceanic island basalt without some form of processing.     

虚拟加工环境中的工件动态建模方法研究

提出并实现了基于平面纹理映射的基元立方体构造方法，以之为动态结点建立了动态八叉树结构，实现了支持变精度动态建模的自相似递归算法。该算法确保离正在加工的部位更近的区域有更高的精度，并采用C^ Builder和OpenGL构造了一个集成于虚拟加工环境的可加工工件模型。     

Les manifestations tectoniques synsédimentaires associées à la compression éocène en Tunisie : implications paléogéographiques et structurales sur la marge Nord-Africaine

In central Tunisia, a synsedimentary tectonic episode has been pointed out through the tectonic movements affecting the Late Palaeocene–Early Eocene successions. This tectonic episode has controlled, to a large extent, the palaeogeographic setting of the area during that period and confirmed the important effect induced by the Pyrenean shortening phase on the edge of the African plate, which obviously has witnessed a common history with the southern part of the European plate. To cite this article: A. El Ghali et al., C. R. Geoscience 335 (2003).     

Wrench tectonics flip at oblique subduction. A model from New Zealand

In eastern North Island New Zealand, oblique subduction of the Pacific Plate beneath the Australian Plate is associated with strain partitioning. Dextral along-strike component of displacement occurred first at Early Miocene major faults within the eastern fore-arc domain. These faults were active from Early Miocene to Pliocene times. Since Pliocene times, most of the movement occurs at western faults such as the Wellington Fault. The latter joins the back-arc domain to the north. The jump of wrench faulting is related to the oblique opening of the back-arc domain. Both phenomena are impeded southwards by the Hikurangi oceanic plateau entering the subduction zone. To cite this article: J. Delteil et al., C. R. Geoscience 335 (2003).     

Continental subduction and exhumation of UHP rocks. Structural and geochronological insights from the Dabieshan (East China)

In the Dabieshan, the available models for exhumation of ultrahigh-pressure (UHP) rocks are poorly constrained by structural data. A comprehensive structural and kinematic map and a general cross-section of the Dabieshan including its foreland fold belt and the Northern Dabieshan Domain (Foziling and Luzenguang groups) are presented here. South Dabieshan consists from bottom to top of stacked allochtons: (1) an amphibolite facies gneissic unit, devoid of UHP rocks, interpreted here as the relative autochton; (2) an UHP allochton; (3) a HP rock unit (Susong group) mostly retrogressed into greenschist facies micaschists; (4) a weakly metamorphosed Proterozoic slate and sandstone unit; and (5) an unmetamorphosed Cambrian to Early Triassic sedimentary sequence unconformably covered by Jurassic sandstone. All these units exhibit a polyphase ductile deformation characterized by (i) a NW–SE lineation with a top-to-the-NW shearing, and (ii) a southward refolding of early ductile fabrics.

The Central Dabieshan is a 100-km scale migmatitic dome. Newly discovered eclogite xenoliths in a Cretaceous granitoid dated at 102 Ma by the U–Pb method on titanite demonstrate that migmatization post-dates HP–UHP metamorphism. Ductile faults formed in the subsolidus state coeval to migmatization allow us to characterize the structural pattern of doming. Along the dome margins, migmatite is gneissified under post-solidus conditions and mylonitic–ultramylonitic fabrics commonly develop. The north and west boundaries of the Central Dabieshan metamorphics, i.e. the Xiaotian–Mozitan and Macheng faults, are ductile normal faults formed before Late Jurassic–Early Cretaceous. A Cretaceous reworking is recorded by synkinematic plutons.

North of the Xiaotian–Mozitan fault, the North Dabieshan Domain consists of metasediments and orthogneiss (Foziling and Luzenguang groups) metamorphosed under greenschist to amphibolite facies which never experienced UHP metamorphism. A rare N–S-trending lineation with top-to-the-south shearing is dated at 260 Ma by the ⁴⁰Ar/³⁹Ar method on muscovite. This early structure related to compressional tectonics is reworked by top-to-the-north extensional shear bands.

The main deformation of the Dabieshan consists of a NW–SE-stretching lineation which wraps around the migmatitic dome but exhibits a consistently top-to-the-NW sense of shear. The Central Dabieshan is interpreted as an extensional migmatitic dome bounded by an arched, top-to-the-NW, detachment fault. This structure may account for a part of the UHP rock exhumation. However, the abundance of amphibolite restites in the Central Dabieshan migmatites and the scarcity of eclogites (found only in a few places) argue for an early stage of exhumation and retrogression of UHP rocks before migmatization. This event is coeval to the N–S extensional structures described in the North Dabieshan Domain. Recent radiometric dates suggest that early exhumation and subsequent migmatization occurred in Triassic–Liassic times. The main foliation is deformed by north-verging recumbent folds coeval to the south-verging folds of the South Dabieshan Domain. An intense Cretaceous magmatism accounts for thermal resetting of most of the ⁴⁰Ar/³⁹Ar dates.

A lithosphere-scale exhumation model, involving continental subduction, synconvergence extension with inversion of southward thrusts into NW-ward normal faults and crustal melting is presented.     

Tectonics of the western margin of the Shan plateau (central Myanmar): implication for the India–Indochina oblique convergence since the Oligocene

We present new data and interpretations on the Neogene tectonics of the Shan scarp area (central Myanmar) and its relationship with the India–Indochina oblique convergence. We describe ductile and brittle fabrics associated with the major features in this area, the Mogok Metamorphic Belt (MMB), the Shan scarp and the Sagaing fault. From these data we identify a succession of two tectonic regimes. First, a dominant NNW–SSE-trending extension, marked by ductile stretching that characterizes the MMB, and associated N70E brittle normal faults. Later, from Middle or Upper Miocene to the Present, these structures were cross-cut by brittle right-lateral faults, among which the most important are the N20W transpressive Shan scarp fault zone and the N–S Sagaing fault. To explain this transition from a dominant transtensive to a transpressive stress regime, that occurred during Miocene, we place our data within a larger geodynamic context. We suggest that, like the intraplate deformation in the Indian Ocean, the end of spreading in the South China sea, the opening of the Andaman basin or the end of subduction within the Indo-Burma range, the change in the tectonic regime in central Myanmar could be in response to a major Miocene regional plate kinematic reorganization.     

洋脊和年轻洋壳俯冲与埃达克岩生成的热模拟

新生代以来 ,环太平洋周边分布的埃达克岩 (Adakite)主要与年轻洋壳俯冲时在 70～ 90km深处的部分熔融有关。利用数值方法 ,模拟了洋壳俯冲的热演化过程并讨论了脱水、熔融对埃达克岩浆活动的影响。结果表明 :仅在活动海岭俯冲前后约 10Ma内 ,年轻的、热的俯冲海洋板片在 75～85km深度范围内 ,温度升高至 82 5～ 10 0 0℃脱水 ,导致年轻洋壳中角闪岩部分熔融 ,形成埃达克岩(Adakite)。而一般洋壳俯冲在 10 0km以下深度才脱水 ,由于脱水区压力较高洋壳自身不能熔融 ,水进入上覆地幔楔状体导致部分熔融 ,形成安山岩 (Andesite