五圆柱体结构群绕流特性及互扰效应研究

基于Fluent流体计算平台,运用大涡模拟方法对亚临界雷诺数Re=3900下“X”形排列五圆柱体结构群三维绕流特性进行研究,主要分析来流攻角α与间距比L/D两个关键参数对五圆柱体结构群的尾流区三维涡结构演化与流体力系数的影响,并揭示其内在流动互扰机理。研究表明:来流攻角和间距比的变化对五圆柱体结构群流动控制及互扰效应的影响显著。在小间距比工况下,观察到柱体群间隙区域内流体高速流动的现象,导致五圆柱体之间的互扰作用十分强烈。间隙流对中间圆柱体和下游圆柱体有较强的冲击作用,对其表面的流体力分布特性有显著的影响。另外,大间距比工况下,当α=0°与L/D≥5.0工况时,柱体群尾流效应强于其间隙流效应。当α=22.5°与L/D=7.0时,位于下游与中间处的圆柱体流体绕流特性存在较大差异。而当α=45°与L/D≥6.0时,位于上游与中间处的圆柱体尾流区均会产生正负交替的漩涡结构。     

Modelling the Shimokita deep coalbed biosphere over deep geological time: Starvation,stimulation, material balance and population models

Basin models can simulate geological, geochemical and geophysical processes and potentially also the deep biosphere, starting from a burial curve, assuming a thermal history and utilizing other experimentally obtained data. Here, we apply basin modelling techniques to model cell abundances within the deep coalbed biosphere off Shimokita Peninsula, Japan, drilled during Integrated Ocean Drilling Program Expedition 337. Two approaches were used to simulate the deep coalbed biosphere: (a) In the first approach, the deep biosphere was modelled using a material balance approach that treats the deep biosphere as a carbon reservoir, in which fluxes are governed by temperature-controlled metabolic processes that retain carbon via cell-growth and cell-repair and pass it back via cell-damaging reactions. (b) In the second approach, the deep biosphere was modelled as a microbial community with a temperature-controlled growth ratio and carrying capacity (a limit on the size of the deep biosphere) modulated by diagenetic-processes. In all cases, the biosphere in the coalbeds and adjacent habitat are best modelled as a carbon-limited community undergoing starvation because labile sedimentary organic matter is no longer present and petroleum generation is yet to occur. This state of starvation was represented by the conversion of organic carbon to authigenic carbonate and the formation of kerogen. The potential for the biosphere to be stimulated by the generation of carbon-dioxide from the coal during its transition from brown to sub-bituminous coal was evaluated and a net thickness of 20 m of lignite was found sufficient to support an order of magnitude greater number of cells within a low-total organic carbon (TOC) horizon. By comparison, the stimulation of microbial populations in a coalbed or high-TOC horizon would be harder to detect because the increase in population size would be proportionally very small.     

The potential of Pléiades images with high angle of incidence for reconstructing the coastal cliff face in Normandy (France)

To monitor chalk cliff face along the Normandy coast (NW France) which is prone to erosion, we tested the potential of cliff face 3D reconstruction using pairs of images with high angle of incidence at different dates from the agile Pléiades satellites. The verticality aspect of the cliff face brings difficulties in the 3D reconstruction process. Furthermore, the studied area is challenging mainly because the cliff face is north-oriented (shadow). Pléiades images were acquired over several days (multi-date stereoscopic method) with requested incidence angles until 40°. 3D reconstructions of the cliff face were compared using two software: ASP® and ERDAS IMAGINE®. Our results are twofold. Firstly, despite ASP® provides denser point clouds than ERDAS IMAGINE® (an average of 1.60 points/m² from 40° incidence angle stereoscopic pairs on the whole cliff face of Varengeville-sur-Mer against 0.77 points/m² respectively), ERDAS IMAGINE® provides more reliable point clouds than ASP® (precision assessment on the Varengeville-sur-Mer cliff face of 0.31 m ± 2.53 and 0.39 m ± 4.24 respectively), with a better spatial distribution over the cliff face and a better representation of the cliff face shape. Secondly, the quality of 3D reconstructions depends mostly on the amount of noise from raw images and on the shadow intensity on the cliff face (radiometric quality of images).     

阿留申—阿拉斯加俯冲带及周边地区地幔过渡带结构研究

利用国家测震台网固定台站和"中国地震科学台阵探测"项目在南北地震带北段布设的宽频带流动台阵记录到的极远震事件,通过SS前驱波震相研究,获得了阿留申—阿拉斯加俯冲带东段及邻区下方410 km和660 km间断面的埋深和起伏形态特征.为增强对SS前驱波震相的识别,我们采用了时差校正和共反射点叠加分析.叠加结果显示,毗邻阿留...     

无定向导线的粗差检验

介绍了先求定向角γ和连接角δ,进而计算多边形内角和闭合差的粗差检验方法。通过大量实例证明这种方法是完全可靠的。     

图像重建块迭代算法中松弛参数选取的研究

在图像重建中,Landweber迭代算法是图像重建算法中的重要方法.本文将针对Landweber分块迭代算法中松弛参数的选取进行研究.在重建过程中采取对投影矩阵按投影角度分块的方法,选取特定的松弛参数.通过数值实验得出结论:对于按角度分块的块迭代算法,松弛参数选取为λ乘以块矩阵与其共轭转置矩阵乘积的最大特征值分之一,当采集完全投影数据,且λ接近(1/6)～(1/7)时效果最好.另外,本文按角度分块的做法和松弛参数的选取方法对于有限角度图像重建问题也是可行的.     

内含裂隙角的恐龙化石轴向受压数值试验及裂纹扩展机理研究

面临众多古生物化石遭受风化破坏的现实,恐龙化石保护是一项世界性难题。化石的风化原因多种多样,其中化石内部裂隙是导致恐龙化石风化、破坏的重要因素。该文以岩石断裂力学为理论依据,模拟分析内含裂隙的恐龙化石在压力作用下的破坏情况。通过数值模拟的方法,进行了内含裂隙恐龙化石数值压缩试验,并对内含裂隙的恐龙化石裂纹扩展机理进行了研究。研究结果表明,随着裂隙角度增大,开裂角逐渐减小,裂隙处特别是两端应力集中,其他部位应力较低、分布均匀;裂纹扩展是从裂纹尖端起裂,最终裂纹扩展到边缘。此研究结果为揭示恐龙化石风化机理和开展保护提供了基础参考资料。     

基于孔隙率的延安黄土抗剪强度模型

孔隙率对黄土抗剪强度具有非常重要的影响,然而,孔隙率对黄土抗剪强度影响效果的认识并不充分。本文以陕西省延安黄土为研究对象,开展不同孔隙率的黄土直剪试验研究,探讨了孔隙率对粘聚力与内摩擦角的定量变化关系;并以此为基础,构建了基于孔隙率的延安黄土抗剪强度模型,并对其进行了验证。研究结果表明:(1)延安黄土粘聚力与孔隙率间呈幂函数变化关系;(2)延安不同孔隙率黄土内摩擦角取值呈现出两个区间,当孔隙率n≥0.4时,其内摩擦角在25±2.5°的范围内变动,而当孔隙率n<0.4时,其内摩擦角在29.5±2°的范围内变动;(3)通过分析得到了基于孔隙率的延安黄土抗剪强度模型,且该模型得到的黄土抗剪强度理论值与实测值间的误差较小,相对误差均在7%以内,具有较高的精确度。研究成果不仅能为延安黄土抗剪强度研究等提供技术支持,而且还能为该地区的工程建设等方面提供理论参考。     

库岸边坡倾角及水位变化对红土型库岸稳定性影响研究

水库库岸失稳对水库安全运行有重大影响。采用土工试验和干湿循环试验,结合数值计算及理论分析,研究红土型库岸边坡倾角和库水位升降与库岸稳定性的关系。结果表明:(1)在一定初始干密度条件下,红土抗剪强度随水位升降循环次数增加而非线性减小,且在水位升降循环约10次时趋于稳定。(2)在一定水位升降速率、升降幅度和升降循环次数条件下,红土型库岸稳定安全系数随库岸边坡倾角的增加总体上呈减小的趋势,且在边坡倾角为50°左右存在稳定安全系数极小值。(3)在一定水位升降循环次数条件下,水位上升到坡高的60%左右为上升阶段的相对危险区域,且水位上升速率对库岸稳定安全系数影响很小;水位下降至坡高的70%左右为库水位下降阶段的相对危险区域,且水位下降速率越大,库岸稳定安全系数越小。(4)针对一定初始干密度,库岸稳定安全系数先随水位升降循环次数的增加而减小,但在水位升降循环次数约10次后逐渐趋于稳定。库岸岩土体性质及库岸边坡倾角、水位变化都会对库岸稳定产生影响。     

一维综合孔径微波辐射计遥感海面温度的敏感性分析

一维综合孔径微波辐射计能够有效提高观测的空间分辨率,其观测入射角通常在0°~55°范围内变化。为了开发适用于一维综合孔径微波辐射计的海面温度反演算法,需要评估其观测亮温对海洋大气环境要素的敏感性。利用海面发射率模型和大气辐射传输模型,构建了适用于一维综合孔径微波辐射计的微波海洋大气辐射传输模式,研究了C波段垂直和水平极化微波辐射亮温在不同入射角下对海洋大气环境要素的敏感性变化情况,并定量计算了相应的敏感系数。结果表明:垂直和水平极化亮温对海洋大气环境要素的敏感性表现出不同的特性。随着入射角的增大,垂直极化亮温对海面温度的敏感性增强,对海面风场的敏感性相对减弱;水平极化亮温则相反。由大气水汽含量和云液态水含量误差引入的垂直和水平极化亮温误差随入射角增大而增大,但是,即使在55°的大入射角下垂直和水平极化亮温误差仍小于0.12 K。对于海面温度反演精度优于1 K的要求,一维综合孔径微波辐射计的测温精度需优于0.6 K。研究结果对于一维综合孔径微波辐射计海面温度反演算法的研究和载荷设计具有一定的理论指导意义。