国产磁通门磁力仪稳定性分析

国产磁通门磁力仪(GM-3磁通门磁力仪)在全国各地磁台站推广应用,两年来,该仪器在武汉地震台工作比较稳定。本文对该仪器的基线值进行了多层线性回归分析。结果表明仪器性能比较稳定。     

黑龙江密山地区晚石炭世含煤岩系沉积和构造特征

从建造和改造两个方面,系统研究了晚石炭世珍子山组的发育特征,分析了与赋煤有关的地质因素。结果表明:珍子山组含煤段沉积厚度比较稳定,含煤性较好,受后期构造破坏较轻,是较好的赋煤区。该研究为密山地区进一步找煤指出了方向。     

流变学:构造地质学和地球动力学的支柱学科

地球是一动态系统,其各层圈的构造运动归根到底就是多矿物复合岩石在各种物理条件(例如,温度、围压、差应力、应变速率、应变方式等)下和化学环境(例如,氧逸度和水含量)中的形变。流变学作为研究岩石力学性质和变形行为的科学,现已成为地球动力学和构造地质学的支柱学科。本文对国际上近年来岩石流变学的最新进展做些扼要的介绍,呼吁中国固体地学界加强流变学的研究,做出经得起时间淘洗、实践检验的原创性成果来,使中国的构造地质学研究迈进国际先进的行列。     

Developing constitutive models from EPR‐based self‐learning finite element analysis

A constitutive model that captures the material behavior under a wide range of loading conditions is essential for simulating complex boundary value problems. In recent years, some attempts have been made to develop constitutive models for finite element analysis using self‐learning simulation (SelfSim). Self‐learning simulation is an inverse analysis technique that extracts material behavior from some boundary measurements (eg, load and displacement). In the heart of the self‐learning framework is a neural network which is used to train and develop a constitutive model that represents the material behavior. It is generally known that neural networks suffer from a number of drawbacks. This paper utilizes evolutionary polynomial regression (EPR) in the framework of SelfSim within an automation process which is coded in Matlab environment. EPR is a hybrid data mining technique that uses a combination of a genetic algorithm and the least square method to search for mathematical equations to represent the behavior of a system. Two strategies of material modeling have been considered in the SelfSim‐based finite element analysis. These include a total stress‐strain strategy applied to analysis of a truss structure using synthetic measurement data and an incremental stress‐strain strategy applied to simulation of triaxial tests using experimental data. The results show that effective and accurate constitutive models can be developed from the proposed EPR‐based self‐learning finite element method. The EPR‐based self‐learning FEM can provide accurate predictions to engineering problems. The main advantages of using EPR over neural network are highlighted.     

Damage identification method using harmonic excitation force considering both modelling and measurement errors

A method of structural damage identification using harmonic excitation force is presented. It considers the effects of both measurement and modelling errors in the baseline finite element model. Damage that accompanies changes in structural parameters can be estimated for a damaged structure from the change between measured vibration responses and ones calculated from the analytical model of the intact structure. In practice, modelling errors exist in the analytical model due to material and geometric uncertainties and a reduction in the degrees of freedom as well as measurement errors, making identification difficult. To surmount these problems, bootstrap hypothesis testing, which enables statistical judgment without information about these errors, was introduced. The method was validated by numerical simulation using a three‐dimensional frame structure and real vibration data for a three‐storey steel frame structure. Copyright © 2005 John Wiley & Sons, Ltd.     

Multifractal modeling and spatial statistics

In general, the multifractal model provides more information about measurements on spatial objects than a fractal model. It also results in mathematical equations for the covariance function and semivariogram in spatial statistics which are determined primarily by the second-order mass exponent. However, these equations can be approximated by power-law relations which are comparable directly to equations based on fractal modeling. The multifractal approach is used to describe the underlying spatial structure of De Wijs 's example of zinc values from a sphalerite-bearing quartz vein near Pulacayo, Bolivia. It is shown that these data are multifractal instead of fractal, and that the second-order mass exponent (=0.979±0.011 for the example) can be used in spatial statistical analysis.     

四川盆地东部再生稻高温伏旱区腋芽萌发期气象适宜度

以四川盆地东部再生稻高温伏旱区为研究区,基于气象条件对腋芽萌发期再生稻生长发育的影响机理,采用结构方程模型探明了腋芽萌发的影响因素、影响路径及影响强度。进一步结合隶属函数和层次分析法,构建了再生稻腋芽萌发气象适宜度模型,并分析了1981—2021年研究区腋芽萌发期气象影响因素及气象适宜度的变化特征。结果表明：气温、空气湿度、降水是四川盆地东部再生稻高温伏旱区腋芽萌发的关键影响因素,基于以上因素的气象适宜度模型能较好地评价再生稻腋芽萌发期的气象影响。1981—2021年研究区气温适宜度、空气湿度适宜度及综合气象适宜度均呈下降趋势,降水适宜度没有表现出明显的变化趋势。气温适宜度、空气湿度适宜度及综合气象适宜度总体呈“西高东低”的空间分布特征,降水适宜度则表现为“东西高、中部低”。1981—2021年研究区气温上升趋势与空气湿度下降趋势显著,导致致害高温（日平均气温≥32℃）积温和致害低湿（日平均相对湿度≤65％）日数明显增加,这是再生稻腋芽萌发期气象适宜度总体呈下降趋势的诱因。     

再论煤中大分子基本结构单元演化的拼叠作用

芳构化作用和环缩合作用的传统煤化作用理论具有一定局限性,煤中基本结构单元拼叠作用是高煤级煤演化的特有机理。拼叠作用显著发生的起点位于镜质组最大反射率Ro,max为6．0％附近,大分子化学键的均裂提供了拼叠作用得以实现的微化学环境条件,其实质是一种“动力化学”过程,与氧接芳碳等有关的大量“均裂”是在短暂的煤化阶段中突然出现的,导致“拼叠作用”的显著发生具有“阶跃式”特征,是造成高煤级煤中期到后期阶段大分子基本结构单元急剧增大的根本原因和主要地球化学机理。     

Using an inerter‐based device for structural vibration suppression

This paper proposes the use of a novel type of passive vibration control system to reduce vibrations in civil engineering structures subject to base excitation. The new system is based on the inerter, a device that was initially developed for high‐performance suspensions in Formula 1 racing cars. The principal advantage of the inerter is that a high level of vibration isolation can be achieved with low amounts of added mass. This feature makes it an attractive potential alternative to traditional tuned mass dampers (TMDs). In this paper, the inerter system is modelled inside a multi‐storey building and is located on braces between adjacent storeys. Numerical results show that an excellent level of vibration reduction is achieved, potentially offering improvement over TMDs. The inerter‐based system is compared to a TMD system by using a range of base excitation inputs, including an earthquake signal, to demonstrate how the performance could potentially be improved by using an inerter instead of a TMD. Copyright © 2013 John Wiley & Sons, Ltd.     

基于滤波顾及起算数据误差的赫尔默特估计法

在参数和起算数据的先验统计性质已知时,提出了基于滤波的顾及起算数据误差的赫尔默特估计法。这种方法估计出了相对于起算数据基准的精度,既充分考虑了起算数据的影响又没有增加计算量,并且将平差计算与随机模型的赫尔估计同时进行,使数据处理过程更加完善。