国产磁通门磁力仪稳定性分析

国产磁通门磁力仪(GM-3磁通门磁力仪)在全国各地磁台站推广应用,两年来,该仪器在武汉地震台工作比较稳定。本文对该仪器的基线值进行了多层线性回归分析。结果表明仪器性能比较稳定。     

青东凹陷古近纪构造演化与盆地转型

通过对三维地震、钻井岩心及录测井资料的详细分析解释,发现青东凹陷古近纪不同演化阶段的构造特征存在着差异性:孔店期-沙四早期青东凹陷以NW向断层控盆为主,整体断层数量较少,但规模较大;沙四晚期断层数量明显增多,各个方向控盆断层均有发育,NW向的青东12断层消亡,主要以NWW和近EW向断层活动为主;沙三-沙二期控盆断层走向主要为NE和NEE向。这种构造格局的转变导致了相应的盆地转型,青东凹陷孔店期表现为受郯庐断裂带左旋走滑应力场控制之下的一系列北东断南西超的北西向半地堑,地层沉积厚度大;沙四期青东凹陷表现为NWW与近EW向兼有的复合盆地格局,为盆地转型阶段;沙三期、沙二期受郯庐断裂带右旋走滑应力场的影响,盆地格局完全转为近EW和NE(E)向,开始发育北断南超的半地堑和双断式堑垒构造。     

传感器布设中有效独立法的简捷快速算法

本文提出一个通过正交三角分解快速计算有效独立法系数的方法。有效独立法是传感器布设中影响最广泛的一种方法,它使目标模态尽可能线性独立。传统的有效独立法计算需要对信息阵进行特征值分解或者计算矩阵逆,计算量较大。本文在笔者以前得出的有效独立法与模态动能法关系的基础上,提出先通过对模态矩阵进行正交三角分解（QR）,然后比较其行范数即可得到有效独立法的系数,进而对各待选传感器位置进行排序并迭代依次删除。在待选传感器位置比感兴趣的模态数较多时,该法的计算效率明显提高。同时,采用正交三角分解删除一行后的更新算法,进一步提高了迭代计算的效率。最后通过I-40桥的算例表明该法的有效性。     

四川理县蒲溪乡边坡变形监测及降雨影响分析

四川省阿坝州理县蒲溪乡河坝村后山边坡属于老滑坡区,2014年6月以来,出现地表拉裂、鼓胀、下挫及挡墙剪切错断等现象,并不断加剧恶化,严重威胁当地民众安全。为预防滑坡灾害,当地政府在边坡前修建防护坝。为评估该防护工程效果,获取6个新建GNSS观测点实时变形观测数据,运用灰色关联法,明确降水变率是造成该区形变的主要因素,进而采用边坡变形量行业常用GM(1, 1)模型,预测可能的边坡形变量,并与GNSS观测点实测值对比,结果表明,在防护坝建成1年7个月后,边坡变形速率逐渐减缓,防护工程治理效果显现。     

特长钢箱梁桥GPS监测数据的奇异谱分析

实时准确地监测和分析大型建筑物的变形对于大型建筑物的施工与运行是十分重要的。奇异谱分析(SSA)是一种与经验正交函数相关联的一种统计技术。文中采用奇异谱分析(SSA)的方法,结合功率谱峰值与原序列和RC1-2重建序列均方误差最小的方法确定最优潜入维数M,研究了特长钢箱梁桥索塔的变形趋势和震荡周期。小波分析技术也可以很好地描述时间序列的时频分布,但SSA重构后的结果比小波要平滑些,更能反映出时间序列的特征。结合苏通大桥北索塔监测序列表明,北索塔站的N,E,U方向上均存在明显的趋势和显著的变动周期,而且也含有较多的噪声信息。     

自动高精度测距系统

介绍了自动高精度测距系统。该系统能以５×１０－７的测距精度测定多个观测点的形变，可作为跨断层动态连续观测的新仪器。     

�����Ƚ��ֻ�������Bayes���Ʒ��ڵؿ��α�����е�Ӧ��

??????????????????α?????GPS???ι???????????α?????????????????????????????????????????????????????????????????????????в??????????????????????????????????????????α???????????????????ι????????????α???????????????????Ч?????????????????????????????????Bayes?????????????????α?????????????????????????????????????????????????????????????????????????????????????????????Щ???????????????????????????????????????????????????GPS????????м??????????????????????????Ч???????????????????????????????????????     

基于小波分解的动态变形预报

阐述了小波变换和多分辨率分析的基本原理,简要地介绍了离线预报和在线预报两种不同的变形预报方式,并在此基础上提出了基于小波分解的动态变形预报的方法,并通过实际算例证明了这种方法的有效性。     

Surface-deformation monitoring in the permafrost regions over the Tibetan Plateau,using Sentinel-1 data

Differential Interferometric Synthetic Aperture Radar(D-In SAR) has been widely used to measure surface deformation over the Tibetan Plateau. However, the accuracy and applicability of the D-In SAR method are not well estimated due to the lack of in-situ validation. In this paper, we mapped the seasonal and long-term displacement of Tanggula(TGL) and Liangdaohe(LDH) permafrost regions with a stack of Sentinel-1 acquisitions using the Small Baseline Subset In SAR(SBAS-In SAR) method. In the TGL region, with its dry soils and sparse vegetation, the In SAR-derived surface-deformation trend was consistent with ground-based leveling results; long-term changes of the active layer showed a settlement rate of around 1 to 3 mm/a due to the melting of ground ice, indicating a degrading permafrost in this area. Around half of the deformation was picked up on monitoring, in contrast with in-situ measurements in LDH, implying that the D-In SAR method remarkably underestimated the surface-deformation. This phenomenon may be induced by the large soil-water content, high vegetation coverage, or a combination of these two factors in this region. This study demonstrates that surface deformation could be mapped accurately for a specific region with Sentinel-1 C-band data, such as in the TGL region.Moreover, although the D-In SAR technology provides an efficient solution for broad surface-deformation monitoring in permafrost regions, it shows a poor performance in the region with high soil-water content and dense vegetation coverage.     

Syntectonic emplacement of the Middle Jurassic Concón Mafic Dike Swarm, Coastal Range, central Chile (33° S)

The Concón Mafic Dike Swarm (CMDS) consists of basaltic to andesitic dikes emplaced into deformed Late Paleozoic granitoids during the development of the Jurassic arc of central Chile. The dikes are divided into an early group of thick dikes (5–12 m) and a late group of thin dikes (0.5–3 m). Two new amphibole ⁴⁰Ar/³⁹Ar dates obtained from undeformed and deformed dikes, constrain the age of emplacement and deformation of the CMDS between 163 and 157 Ma. Based on radiometric ages, field observations, AMS studies and petrographic data, we conclude that the emplacement of the CMDS was syntectonic with the Jurassic arc extension and associated with sinistral displacements along the NW-trending structures that host the CMDS. The common occurrence of already deformed and rotated xenoliths in the dikes indicates that deformation in the granitoids started previously.The early thick dikes and country rocks appear to have been remagnetized during the exhumation of deep-seated coastal rocks in the Early Cretaceous (around 100 Ma). The remanent magnetization in late thin dikes is mainly retained by small amounts of low-Ti magnetite at high temperature and pyrrhotite at low temperature. The magnetization in these dikes appears to be primary in origin. Paleomagnetic results from the thin dikes also indicate that the whole area was tilted  23° to the NNW during cooling of the CMDS.The NNW–SSE extension vectors deduced from the paleomagnetic data and internal fabric of dikes are different with respect to extension direction deduced for the Middle–Late Jurassic of northern Chile, pointing to major heterogeneities along the margin of the overriding plate during the Mesozoic or differences in the mechanisms driving extension during such period.