ASD地面光谱仪在新疆白杨河铀矿床蚀变信息研究中的应用

新疆白杨河铀矿床是我国目前已探明的中型矿床,矿床蚀变特征的研究有助于对白杨河矿床外围及深部找矿提出更好的找矿认识。使用ASD可见光-短波红外地面光谱仪对白杨河矿床地表以及钻孔岩心进行光谱测量,发现了矿床中蚀变矿物主要有高铝绢云母、中铝绢云母、低铝绢云母、绿泥石、蒙脱石、赤铁矿、褐铁矿等。矿床地表铀矿化异常地段主要发育高铝绢云母蚀变;钻孔岩心中铀矿化富集部位蚀变矿物组合为高铝绢云母、绿泥石、赤铁矿。研究结果可为矿床外围及深部铀矿勘探提供参考与借鉴。     

二连浩特市水资源与经济社会和谐度评价

以二连浩特市人水关系为研究对象,从取水总量和谐度、用水效率和谐度、水生态环境保护和谐度三个方面构建了二连浩特市水资源与经济社会和谐度评价体系。从评价结果可以看出,二连浩特市开展节水型社会建设以来,水资源与经济社会和谐度发生了较显著的改善。评价体系较好地反映了二连浩特市水资源与经济社会和谐度,对北方干旱缺水地区节水型社会建设具有借鉴意义。     

钻孔压水试验水压式栓塞排水泄压问题研究

压水试验水压式栓塞较其他类型栓塞可靠、灵活,但一直存在试验结束后排水泄压难题,使该类型栓塞使用局限于浅孔及地下水位高的钻孔。本文对该问题进行了研究,提出了解决方案,设计了新型水压式栓塞结构。解决了一直以来水压式栓塞的排水泄压难题,突破了试验孔深限制,使水压式栓塞能得到广泛应用。介绍了该新型水压式栓塞的结构和工作原理以及工程应用效果。     

基岩水井压裂增水机理分析

基岩地层压裂增水与岩层性质密切相关,不同岩性其力学性质及其裂隙构造不同,压裂机理与工艺方法就不同。根据基岩地下水岩层特点,结合水力压裂增水试验,着重分析了水力压裂的形成机制,探寻了不同岩层及其力学性质与压裂的关系。     

北方某经济开发区地下水污染调查评价

本文应用污染指数法,对北方某经济开发区及周边地下水水质进行了污染评价,结果表明研究区地下水水质以轻污染和中污染为主,局部地区出现较重污染,主要指标为硝酸盐氮、三氯甲烷和三氯乙烯。通过对工业废水、再生水、河水水质的检测,发现研究区地表水水质与污水处理厂再生水排放密切相关,地下水污染很可能与开发区企业排污有关。由于开发区所处位置的环境敏感性和脆弱性,建议今后在开发区及附近继续开展相关研究,进一步查明地下水的硝酸盐氮及有机污染物来源、污染途径,建立完善的监测体系,以便及时切断污染源,保障城市及当地供水安全。     

贵州威宁麻窝山岩溶盆地沉积物中粘土矿物特征及其古气候指示意义

利用X射线衍射等分析方法,对贵州威宁麻窝山岩溶盆地沉积物中粘土矿物进行研究,获得了粘土矿物的组成、相对含量、结晶度指数、化学指数以及相对含量比值等方面的信息,探讨该盆地的沉积环境演化特征。研究表明,粘土矿物以伊/蒙混层矿物(30%~75%)和绿泥石(10%~45%)为主,高岭石(5%~20%)和伊利石(10%)次之,基本不含蒙脱石。伊/蒙混层矿物和绿泥石含量呈负相关性。高岭石含量在剖面底部较稳定,在484cm上部出现较大的波动。伊利石结晶度和化学指数与伊/蒙混层矿物含量具有较好的正相关性,且在第Ⅰ阶段相对于其它指标较敏感,出现波动。通过综合对比分析,将研究区剖面划分为4个阶段,其是3个冷暖干湿的大循环和若干个小循环气候环境的物质记录。     

扎龙湿地藻类植物群落结构特征及水质初步评价

扎龙湿地是我国北方同纬度地区保留最完整、最原始、最开阔的湿地生态系统,地处中温带,属大陆性季风气候。为了探究其藻类植物群落的变化特征及其与水环境的关系,本文于2011年春、夏、秋季对扎龙湿地的藻类植物群落进行调查分析,共发现藻类植物349个分类单位(包括变种、变型),隶属于8门105属,藻类植物群落全年均以绿藻为主导,其组成呈绿藻-硅藻型。优势种中绿藻门主要以镰形纤维藻(Ankistrodesmus falcatus)和四尾栅藻(Scenedesmus quadricauda)为主,硅藻门以弯棒杆藻(Rhopalodia gibba)和隐头舟形藻(Navicula cryptocephala)为主,优势种组成具有明显的季节演替现象。藻类植物细胞密度呈现明显的单峰型,夏季最高,平均为10.74×10~4ind./L。湿地研究区域分为开阔型水域、小型封闭水域、湿地型水域和湖泊型水域四个生态类型,不同水域藻类植物群落结构特征明显不同。经聚类和多维尺度分析,将不同采样点的藻类植物群落分为四组,多样性指数表明湿地水体处于轻度污染或无污染状态。综合研究结果可以认为扎龙湿地的水体基本处于贫营养-中营养状态,只有极少数水域处于富营养状态。     

An experimental study on water entry of asymmetric wedges

The aim of the paper is to provide an experimental reference for investigation of asymmetric water entry of wedges. Parameters of the study include initial deadrise angle, inclination angle and impact speed. Initial deadrise angles of the wedges were 20° and 30° with inclination angles ranging from 0° to 15° in 5° increments. Wedges were freely fallen from three different heights. Time histories of impact pressure and body acceleration were recorded. Sampling rate of measurements were set to 25 KHz. Main configuration of each test including mass of the wedge and water level were kept unchanged during all experiments. Additionally, several calibration tests were conducted to assess the repeatability and accuracy of the recorded data. The experimental results are compared with different entry theories and other available experiments. The comparison shows a reasonable agreement and indicates that the inclination angle can dramatically affect the impact pressure experienced by the wedges. Finally, the results show that the traditional asymmetric theories are not appropriate for all inclination angles.     

琼东南盆地深水区新近系海底扇沉积特征与资源潜力

综合利用钻井、岩心、薄片及分析化验资料研究了琼东南盆地深水区新近系海底扇沉积特征,并利用最新的三维地震资料,通过井震精细标定、多属性融合技术、方差体切片、三维地貌砂体镂空等综合技术手段,精细刻画了海底扇砂体的空间分布特征。研究结果表明,深水区新近系海底扇是由陆架区的砂体滑塌并二次搬运形成,形成过程具有多期次性。受不同物源的影响,海底扇岩性和物性存在较大的差异。海底扇岩性及沉积构造具有砂质滑塌、碎屑流、浊流和深水底流改造的特征。海底扇的沉积微相、厚度、砂泥比和砂泥岩空间配置关系直接控制了地震振幅反射强度和频率的变化。砂体纵向叠置,横向连片,并被后期泥质水道切割分块形成多个岩性圈闭。综合分析认为,深水区海底扇砂体发育区烃源条件优越,储盖配置关系和圈闭条件良好,具备形成大中型岩性油气藏的有利条件,具有较大的油气勘探潜力。     

Development of a new method for efficiently calculating of evaporation from the phreatic aquifer in variably saturated flow modeling

In this paper, we proposed a new method that has been developed based on the surface soil moisture content (SSMC) to more efficiently calculate the groundwater evaporation in variably saturated flow modeling. In this method, the empirical formula to calculate evaporation was modified and the value of the formula varies from zero to one as a closed interval. In addition, the simulation code for calculating the groundwater evaporation based on the SSMC method was incorporated into the EOS9 module of Tough2, a variably saturated flow modeling code. Finally, two numerical tests and a case simulation were conducted to verify the feasibility and accuracy of the SSMC method. Simulation results indicate that the SSMC method is capable of appropriately simulating the characteristics of water flow in vadose zone and the amount of evaporation with the variable water table. And such results are in coincidence with the value calculated by the logistic function method, and fit well with the measured data globally rather than locally.