Centrifugal test of a road embankment built after new dredger fill on thick marine clay

Abstract

The construction of a 100-km road network is planned on a land reclamation area in the Oujiang Estuary in China. The embankment had a height of 4 m and a base width of 60 m. The reclamation area is newly filled by a 3-m dredger fill on a 48-m thick layer of marine clay. Estimation of the settlement of the future road network is difficult. To guide the construction of the road network, a 1/100-scale centrifuge model test was performed with a marine clay sample from the construction site to simulate the layered settlements and evaluate the drainage effect of prefabricated vertical drains in the dredger fill in the following 10 years. The results of the centrifuge modeling test are verified by 10-month in situ monitoring, which shows agreement between the centrifuge modeling test results and the in situ results. The test results indicate that additional time is needed to reinforce the newly added dredger fill by the surcharge preloading method to uplift the elevation of the reclamation area with dredger fill.     

Modeling of Multi-Freedom Ship Motions in Irregular Waves with Fuzzy Neural Networks

1 .IntroductionAshiptravelingatseaundergoesundesirablewave inducedmotions ,namely ,surge ,sway ,heav ing ,rolling ,pitchingandyaw .Thesemotionsoftencauseproblemstothecrew ,theonboardequip mentand ,intheworstcase ,thesafetyofthevessel.Tominimizethewave inducedshipmotions ,controlsystemsmaybeapplied .Theaccuratemodelingofshipmotionsisthereforeveryimportantforshipdesignanddesignofmotioncontrolsystems .Manyresearchershavedevelopedshipmotionpredictionmethodsbasedonthepotentialflowtheo ries (Dong ,…     

1999年以来台湾及邻近海域7.5级以上强震前的条带现象

中国台湾地区地处欧亚板块与菲律宾海板块之间,地震活动频繁．本文报道了 我国台湾地区及其邻近海域1985～2002年间5．5级以上地震的条带内外频度比分 布,并着重研究了1999—2002年中发生的3次7．5级以上地震前的条带现象．其结 果表明:台湾地区近期发生的3次7．5级以上大地震前,5．5级以上地震呈条带分 布．这些条带符合条带内地震个数Nin≥6的条件,符合条带内、外频度比Nin／(Nin Nout)≥75％的条件,也符合条带长宽比大于5的要求,只是与板内地震条带相比,条 带的长度较短．     

Spatial assessment and redesign of a groundwater quality monitoring network using entropy theory, Gaza Strip, Palestine

Using entropy theory, a methodology was developed for the evaluation and redesign of groundwater quality monitoring wells in the Gaza Strip in Palestine. Essential to the methodology is the development of a Transinformation Model (TM) which yields the amount of information transfer and the dependency between the wells as a function of distance. The TM parameters, such as the minimum transinformation and the range, were employed for evaluating the network which revealed that most of the distances between wells were less than the range. It also indicated that a high percentage of redundant information existed in the network. Therefore, the network was reduced by superimposing a square pattern over the monitored area and selecting one well per square block in a stratified pattern. The methodology was tested using the chloride data collected from 1972–2000 from 417 groundwater quality monitoring wells in the Gaza Strip. The number of the groundwater quality monitoring wells in the Gaza Strip was reduced by 53%, while there was 26% redundant information based on the minimum existing distance between wells. This methodology is meant to help monitor the groundwater quality (salinity) in the Gaza Strip.     

CELLULOSE DECOMPOSTION IN TROPICAL PEAT SWAMPS

Given that organic soil is a complex substrate and there are many environmental factors which directly or indirectly control its decomposition processes, the use of standard substrate simplify the system in that the effect of substrate quality could be eliminated and influence of certain environmental conditions such as edaphic factors, acidity and moisture could be focused on. In addition to the forest floor, decomposition potential down the peat profile can also be examined. Cotton strip assay was used to estimate decomposition potentials in tropical peat swamp occupied by different Shorea Albida peat swamp forest communities, The 'Alan Batu' , the ' Alan Bunga' , the 'Alan Padang' and the ' mixed Alan' forest communities.Greatest decay rates on the peat surface took place during the wet period. The moist condition of the wet months appeared to favour the growth and stimulate activities of decomposer population and soil invertebrates. Generally, 50% of cotton tensile loss is achieved after four weeks     

真空-堆载预压处理高速公路软基的有限元计算

根据高速公路路基的变形特点，提出了真空-堆载联合预压法处理软基的三维Biot固结有限元计算模型，将砂井按照实际尺寸划分单元，避免了平面计算方法中的砂井处理的问题，较以往的平面数值方法更接近实际情况。结合修正剑桥模型，对某真空-堆载联合预压试验段进行了计算、分析，结果令人满意。     

Optimization of the Sampling Technique for the Determination of Dissolved Hydrogen in Groundwater

In this study a field‐sampling technique for dissolved hydrogen (H₂) in groundwater will be presented which allows the transport of gaseous samples into the laboratory for further analysis. The method consists of transferring the headspace trapped in a gas‐sampling bulb which is continuously purged by groundwater into previously evacuated vials using a gas‐tight syringe. Three transfer steps with preceding evacuation of the vial led to a H₂‐recovery of 100 % in laboratory experiments. The method has been applied to determine H₂ concentrations in an aquifer contaminated with chlorinated solvents. Tests concerning the effect of different pumping techniques on H₂ concentrations revealed that most reliable values were obtained with a bladder pump, while an electrically driven submersible pump generated considerable amounts of hydrogen due to electrochemical interactions with the sampled water. Concentrations of dissolved hydrogen in field and laboratory samples were about two orders of magnitude higher when sampling was performed with the electrically driven submersible pump compared to sampling with the bladder pump and a peristaltic pump. Lab experiments with a Plexiglas reservoir to produce H₂‐enriched water were used to study the effect of two tubing materials (PVC, polyamide) on H₂ losses. PVC tubing turned out to allow transfer of H₂‐enriched water over 25 m without significant losses, while PA‐tubing was not suitable for sampling of H₂.     

Vertical vibration of a rigid strip footing on viscoelastic half-space

This paper presents an analytical method for modeling the dynamic response of a rigid strip footing subjected to vertical-only loads. The footing is assumed to rest on the surface of a viscoelastic half-space; therefore, effects of hysteretic soil damping on the impedance of the foundation and the generated ground vibrations are considered in the solution. To solve the mixed boundary value problem, we use the Fourier transform to cast a pair of dual integral equations providing contact stresses, which are solved by means of Jacobi orthogonal polynomials. The resulting soil and footing displacements and stresses are obtained by means of the Fourier inverse transform. The solution provides more realistic estimates of footing impedance, compared to existing solutions for elastic soil, as well as of the attenuation of ground vibrations with distance of the footing. The latter is important for the estimation of machine vibration effects on nearby structures and installations.     

架子台沟低品位铅锌矿原生晕地球化学特征及深部矿产预测

对架子台沟一带1:50 000化探异常检查中,地表发现有铅锌矿化显示,经对激电测深异常深部钻探验证发现有低品位锌矿(化)体。通过系统采集0号勘探线上的2个钻孔中岩石、矿石样品,进行原生晕特征研究分析表明:矿体近矿元素为Ag、Pb、Zn、Cd,尾矿元素为W、Sn、Bi;轴向分带序列由上至下为:Pb-Au-Ag-Mo-Bi-Sn-Cu-Cd-W-Zn。对成矿元素与相关金属元素进行聚类分析、因子分析,并结合激电测深结果,认为在矿体的侧部、深部仍可能有盲矿体。     

A strip adjustment procedure to mitigate the impact of inaccurate mounting parameters in parallel lidar strips

Lidar (laser scanning) technology has been proven as a prominent technique for the acquisition of high-density and accurate topographic information. Because of systematic errors in the lidar measurements (drifts in the position and orientation information and biases in the mirror angles and ranges) and/or in the parameters relating the system components (mounting parameters), adjacent lidar strips may exhibit discrepancies. Although position and orientation drifts can have a more significant impact, these errors and their impact do not come as a surprise if the quality of the GPS/INS integration process is carefully examined. Therefore, the mounting errors are singled out in this work. The ideal solution for improving the compatibility of neighbouring strips in the presence of errors in the mounting parameters is the implementation of a rigorous calibration procedure. However, such a calibration requires the original observations, which may not be usually available. In this paper, a strip adjustment procedure to improve the compatibility between parallel lidar strips with moderate flight dynamics (for example, acquired by a fixed-wing aircraft) over an area with moderately varying elevation is proposed. The proposed method is similar to the photogrammetric block adjustment of independent models. Instead of point features, planar patches and linear features, which are represented by sets of non-conjugate points, are used for the strip adjustment. The feasibility and the performance of the proposed procedure together with its impact on subsequent activities are illustrated using experimental results from real data.