PSO-LSSVM模型在位移反分析中的应用

提出了一种基于均匀设计原理、最小二乘支持向量机(LSSVM)和粒子群优化算法(PSO)的快速位移反分析方法。该方法利用均匀设计和有限差分法获得学习样本,再用粒子群算法搜索最优的最小二乘支持向量机模型参数。并用最小二乘支持向量机回归模型建立反演参数与监测点位移值之间的非线性映射关系,最后用粒子群算法从全局空间上搜索与实测位移最吻合的反演参数。该反演模型利用了粒子群算法高效简单、均匀设计构造高质量小样本以及最小二乘支持向量机的小样本、泛化性能好的特点。将该模型应用于龙滩水电站左岸地下厂房区岩体地应力场的反演分析中,计算结果与实测的位移值和地应力值均吻合较好,说明了该模型在岩土工程快速反演分析中具有良好的应用价值。     

盾构施工引起土体三维变形的计算方法研究

对随机介质理论中参数? 的取值进行研究,提出了适用于不同土层的参数计算公式;隧道周围土体移动采用更加符合实际的椭圆形非等量径向移动模式。在此基础上,对随机介质理论进行修正,提出了适用于地表及土体内部各点位移和变形的计算公式。结合工程实例,通过与实测值、施成华等方法及Loganathan等方法计算结果进行对比分析表明,方法计算得到的结果与实测数据较吻合。     

Amplification system for concentrated and distributed energy dissipation devices

Recent analytic, experimental, and practical studies are developing energy dissipation devices combined with amplifying mechanisms (AM) to enhance structural behavior. This research presents the theoretical and experimental development of the eccentric lever‐arm system (ELAS), a new system generically called amplified added damping (AAD), which is a combination of an AM with one or more dampers capable of supporting large deformations. The proposed AM device is a variant of the well‐known lever‐arm system. This work is divided in four parts: (1) kinematics of the ELAS and definition of an equivalent AAD; (2) parametric analysis of a linear single‐story structure with ELAS; (3) numerical analysis of a multi‐degree‐of‐freedom structure with frictional damping with and without AM; and (4) pseudo‐dynamic tests of a full scale asymmetric one story steel structure with and without frictional AAD. Parametric analyses demonstrate that using high‐amplification ratios and low supplemental damping could be a good practice. On the other hand, similar to systems without AMs, dissipation efficiency increases conformably with the stiffness of the secondary structure. As expected, it was observed that deformation was highly concentrated in the flexible edge of the asymmetric test model without damper. Conversely, the structure with frictional AAD clearly showed uniform plane deformation. The implemented AM, which has a large amplifying ratio of α≈11, performed with close accordance with numerical simulations and a high mechanical efficiency (≈95%) using a frictional damper with a very low force capacity. Copyright © 2016 John Wiley & Sons, Ltd.     

THE COSEISMIC VERTICAL DISPLACEMENTS OF SURFACE RUPTURE ZONE OF THE 1556 HUAXIAN EARTHQUAKE

Coseismic displacement plays a role in earthquake surface rupture, which not only reflects the magnitude scale but also has effect on estimates of fault slip rate and earthquake recurrence intervals. A great historical earthquake occurred in Huaxian County on the 23^rd January 1556, however, there was lack of surface rupture records and precise coseismic vertical displacements. It's known that the 1556 Huaxian earthquake was caused by Huashan front fault and Weinan plateau front fault, which are large normal faults in the east part of the southern boundary faults in Weihe Basin controlling the development of the basin in Quaternary. Here, we made a study on three drilling sites in order to unveil the coseismic vertical displacements. It is for the first time to get the accurate coseismic vertical displacements, which is 6m at Lijiapo site of Huashan front fault, 7m at Caiguocun site, and 6m at Guadicun site of Weinan plateau front fault. These coseismic displacements measured based on same layers of drilling profiles both at footwall and hanging wall are different from the results measured by former geomorphological fault scarps. It's estimated that some scarps are related with the nature reformation and the human beings' activities, for example, fluviation or terracing field, instead of earthquake acticity, which leads to some misjudgment on earthquake displacements. Moreover, the vertical displacements from the measurement of geomorphological scarps alone do not always agree with the virtual ones. Hence, we assume that the inconsistency between the results from drilling profiles and geomorphological scarps in this case demonstrates that the fault scarp surface may have been demolished and rebuilt by erosion or human activities.     

Dynamic responses of structure–soil–structure systems with an extension of the equivalent linear soil modeling

A three-dimensional problem of cross interaction of adjacent structures through the underlying soil under seismic ground motion is investigated. The story shears and lateral relative displacements (drifts) are the targets of the computations. These are calculated using a detailed modeling of soil, the foundations and the two adjacent structures. An equivalent linear behavior is assumed for the soil by introducing reduced mechanical properties consistent with the level of ground shaking for the free-field soil. Then a distinctive soil zone (the near-field soil) is recognized in the vicinity of the foundations where the peak shear strain under the combined effect of a severe earthquake and the presence of structures is much larger than the strain threshold up to which the soil can be modeled as an equivalent linear medium. It is shown that it is still possible to use an equivalent linear behavior for the near-field soil if its shear modulus is further reduced with a factor depending on the dynamic properties of the adjacent structures, the near-field soil, and the design earthquake. Variations of the dynamic responses of different adjacent structures with their clear distances are also discussed.     

西秦岭北缘断裂带武山—天水段全新世活动的新证据

西秦岭北缘断裂带是青藏高原东缘一条大型左旋走滑活动断裂带和历史强震带。前人对该断裂漳县以西段曾开展过大量研究工作,获得其最新构造活动的地质地貌证据,而中段(武山—天水段)和东段(天水—宝鸡段)最新活动时代一直存在分歧。基于高分辨率卫星影像解译、地质地貌调查与综合分析、探槽开挖和~(14)C测年等方法,对西秦岭北缘断裂带武山—天水段进行详细研究,结果表明:该段断裂晚第四纪以来活动显著,地貌上主要表现为断层垭口、断层沟槽、山脊与水系及阶地同步左旋位错、断层陡坎等;多个探槽剖面及测年结果显示其最新构造活动断错了全新世地层,为该段断裂全新世活动和大震危险性分析提供了新的证据。     

地震动特性对隔震结构弹塑性位移反应谱的影响研究

根据特定震源机制、震级、断层距和场地条件选取69条地震动记录并进行分组,利用Nspectra软件计算隔震结构的弹塑性位移反应谱,分析断层距、场地条件、震级、阻尼比对弹塑性位移谱的影响,探讨隔震层的力学参数对地震能量耗散的影响。研究结果表明:相较于远场,处于近场的隔震结构最为不利,隔震层位移谱值受场地条件、地震加速度和速度大小影响较大;随着断层距的增大,位移谱值衰减较快,且在软土场地中隔震层的位移谱值衰减幅度大于硬土场地;地震震级大小对位移谱形状的影响不明显,但能够使隔震层的位移谱值产生整体缩放效应;阻尼比在小于0.4的范围内,隔震层在不同地震动特性作用下位移谱值差别较大,但在大于0.4以后,位移谱值及谱形基本趋于一致;屈服力较小(恢复力/重力小于等于1)的隔震层随自振周期增大其耗能性能更加突出。     

直接基于位移设计的高强钢组合K形偏心支撑钢框架的抗震性能研究

K形高强钢组合偏心支撑(K-HSS-EBF)是指耗能连梁和支撑采用Q345钢,而框架梁、框架柱采用高强度钢(如Q460)。为研究其在罕遇地震作用下的抗震性能,在试验研究的基础上,采用直接基于位移的抗震设计方法设计了5层、8层和12层算例,分别进行静力推覆分析和动力弹塑性分析,研究高强钢组合偏心支撑钢框架在罕遇地震作用下层间侧移分布和破坏模式。研究结果表明:直接基于位移的抗震设计方法设计的算例在罕遇地震作用下,结构的层间侧移满足我国现行抗震规范的要求,结构呈理想的渐进式梁铰屈服机构,并证明该设计方法的合理性和可靠性。     

世界油气储层二氧化碳埋存量计算研究

二氧化碳减排问题备受世界瞩目,由于温室气体大量排放而引起的全球气候变暖问题日趋严峻,必须采取积极有效措施.应用CO2提高采收率是埋存CO2的重要途径,CO2提高采收率项目分为混相驱油和非混相驱油,CO2的埋存量决定于储层的性质和提高的采收率数值.通过对二氧化碳埋存计算方法的研究,实现CO2埋存和提高原油产量最大化,改善开发效果.必将为全球生态保护,石油资源的高水平、高效益开发和可持续发展提供理论及实践依据.     

Determination of column size for displacement‐based design of reinforced concrete frame buildings

This article reports a method to determine the storey‐wise column size for displacement‐based design of reinforced concrete frame buildings with a wide range of storey drift and building plan. The method uses a computer program based algorithm. The basic relation used in the algorithm is formulated by considering the various possible deformation components involved in the overall frame deformation. As a necessity to represent the deformation component due to plastic rotation of beam members, a relation between the beam plastic rotation and the target‐drift is adopted. To control the dynamic amplification of interstorey drift, a target‐drift dependant design‐drift reduction factor is used. The dynamic amplification of column moment is accounted with the help of an approximate conversion of fundamental period of the building from the effective period of the equivalent SDOF system. To avoid the formation of plastic hinge in column members, a design‐drift dependant column–beam moment capacity ratio is used. The method successfully determines the storey‐wise column size for buildings of four plans of different varieties, heights up to 12 storeys and target‐drift up to 3%. Copyright © 2013 John Wiley & Sons, Ltd.