The dependence of response spectrum on the tectonic ambient shear stress field

Introduction The acceleration response spectrum and peak ground acceleration are the necessary and im-portant parameters in earthquake-resistant design at present. They are still active research field. With the increase of digital high accurate strong motion observation data, especially the earth-quakes of Loma Prieta (M=7.0) in 1989; Landers (M=7.3) in 1992; Big Bear (M=6.4) in 1994 and Northridge (M=6.7) in 1994 in USA; Kozani (M=6.6) earthquake and afteshocks in 1995 in Greece; Dinar…     

中国大陆活动地块边界带主要断层的强震震间晚期综合判定

由于中国大陆强震主要分布在活动地块边界带上,所以活动地块边界带主要断层成为我国大陆型强震研究的重要目标,各强震孕育阶段的判定是大陆型强震原地复发的动力学过程研究主要内容,而目标断层是否处于震间晚期也是强震时间预测的重要研究基础.虽然地震短临预测仍存在诸多科学难题,但最近20年来全球若干强震相关研究表明,如果放宽预测时间尺度的要求,有些方法也可用于强震震间晚期的判定.本文以中国大陆活动地块边界带的391条断层段为研究目标,利用地震地质的强震破裂空段、大地测量的断层运动闭锁段、地震活动的中小地震稀疏段、数值模拟的库仑应力增强显著段等方法,综合判定中国大陆活动地块边界带可能处于震间晚期的主要断层段.本文结果仅是初步结果,该结果的可靠程度有赖于监测条件,其科学性有赖于大陆型强震孕育发生动力学过程的认识水平,虽然本文尝试给出中国大陆活动地块边界带主要断层的震间晚期判定结果,但其结果可靠程度、精细程度等均存在巨大的改善空间.最后,从断层孕震阶段判定需求的角度,本文尝试给出大陆型震源物理模型的具体基础模型,期望起到抛砖引玉的作用,也期望更多地震学家关注大陆型强震的物理机制及其预测基础研究.

     

A tectonic stress map of China and adjacent regions from earthquakes occurred during 2000～2004

Earthquake focal mechanism solutions provide the basic information about the present-day regional tectonics stress distribution, which controls the activities of crustal faults. Therefore, continued efforts for updating the da-tabase of earthquake focal mechanism solutions are quite valuable and important. The international lithosphere program initiated the ″world stress map project″ (Zoback, 1992) since 1980′s. During this project, worldwide studies and measurements of present-day regional…     

Characteristics of recent tectonic stress field in Jiashi, Xinjiang and adjacent regions

Introduction The Pamirs region where Jiashi is located is one of the most active regions of continental plate dynamics in China. Frequent earthquakes here, especially several strong earthquakes oc- curred in 1997 and 2003, have provided excellent conditions for studying the tectonic stress field in this region and a large number of results (GAO and WEN, 2000; GAO et al, 2004; XU, 2001; ZHOU et al, 2001) have been obtained. Although different methods and data were used, under- standings …     

Inversion of coseismic stress-triggered fault slips using borehole strainmeter observations

Coseismic stress-triggering is becoming a new hot spot of research. Coseismic strain steps recorded by borehole strainmeters are particularly valuable in studying coseismic stress-triggered fault slips. Based on the theory of dis location, one can invert the triggered fault slips with such data if he/she has a well understanding about the local faults. Genetic algorithm can be applied to significantly raise the efficiency of searching a best solution among all possibilities in this kind of inversion. A testifying check of the program and analyses of each parameter＇s influence may further enhance the reliability of inversion results. Taking complexity of geological structure into account, the inversion results should be regarded as the predominant property or a comprehensive effect of triggered local faults＇ activities. As an attempt, we inverted the assumingly active faults＇ slips triggered by the Ms=8.1 Kunlun Mountain earthquake over Beijing area.     

Cohesive Crack Analysis of Toughness Increase Due to Confining Pressure

Apparent fracture toughness in Mode I of microcracking materials such as rocks under confining pressure is analyzed based on a cohesive crack model. In rocks, the apparent fracture toughness for crack propagation varies with the confining pressure. This study provides analytical solutions for the apparent fracture toughness using a cohesive crack model, which is a model for the fracture process zone. The problem analyzed in this study is a fluid-driven fracture of a two-dimensional crack with a cohesive zone under confining pressure. The size of the cohesive zone is assumed to be negligibly small in comparison to the crack length. The analyses are performed for two types of cohesive stress distribution, namely the constant cohesive stress (Dugdale model) and the linearly decreasing cohesive stress. Furthermore, the problem for a more general cohesive stress distribution is analyzed based on the fracture energy concept. The analytical solutions are confirmed by comparing them with the results of numerical computations performed using the body force method. The analytical solution suggests a substantial increase in the apparent fracture toughness due to increased confining pressures, even if the size of the fracture process zone is small.     

中(下)承式拱桥吊杆静张力分析方法的改进

在中(下)承式拱桥的有限元模型中,引入了由于施工中吊杆长度调整而产生的几何刚度矩阵,用一阶矩阵摄动理论,导出了相应的吊杆系静张力分析的相关公式。对一实际中承式拱桥的数值计算分析表明,使用本方法可有效地提高中(下)承式拱桥的吊杆静张力分析的准确性。     

纵波质点的运动与界面的反射

在原有波动学的基础上,通过对波传播质点的运动和作用进行研究,提出了波传播的力学作用不仅有因形变产生的应力,还存在着另一种由速度决定的不同形式的力——“动作用力”.动作用力才是波传播的根本动力.由“动作用力"和形变应力确立波的动力学方程,由这个方程,又可确定质点的运动规律.质点在波传播中一般并不作弹性振动,质点沿一个方向运动进行能量传递后,只作微弱的回复运动.质点这种运动特点才符合能量守恒.质点这种运动特点决定不同的界面性状有不同形态的反射波.     

基于耦合场分割算法的ANSYS二次开发及其应用

耦合场分割算法是当前研究的热点之一。本文首先对比研究了瞬态热传导方程和孔压增长消散方程,提出了一种适用于ANSYS二次开发的分割算法,并对2种不同的预测值计算模式对计算稳定性的影响进行了分析。然后,据之对ANSYS温度—结构耦合场模块进行了开发,形成了岩土工程有效应力计算模块。数值实验表明,这种方法具有较高的计算精度和良好的计算稳定性,并且能够充分利用现有程序资源,具有较高的工程应用价值。     

安宁河-则木河断裂带地震视应力研究

利用四川和云南数字遥测地震台网的数字地震记录资料。研究了包括地震视应力在内的震源参数。首先对资料进行预处理,然后计算地动位移和速度的功率谱积分,再计算地震辐射能量和视应力等震源参数。根据计算结果分震级区间研究了视应力值沿安宁河-则木河断裂带的分布情况,及该断裂带上中等地震的震源谱及参数差异,认为安宁河断裂带视应力相对更高。